Distillation Glassware

Compare Tool

Select up to 3 products

Distillation Glassware
1 - 32 of 61
  • Short Path Distillation Kit

    United Scientific Supplies

    …Tube. The Thermometer, with a range of -10° to 50° C and filled with a petroleum-based solution with red dye, connects to the Distillation Head through the 10/30 port. Penny Head Glass Stoppers are included to cap the 50ml Single Neck round bottom flasks after distillate is collected.

  • Distillation Adapter, Claisen

    DWK Life Sciences (Kimble)

    Provides dual entry into a variety of flasks BEVEL-SEAL adapters allow temperature measurements at either top outer opening. Useful for reflux with addition- type reactions. Adapter consists of two female standard taper joint fittings at the top and one male standard taper joint at the bottom.…

  • Support Distillation Cart


    Distillation receiver carts for use with our 10L thru 100L reactor systems. Heavy Duty support cart can be used for round bottom flasks or cylindrical distillation receivers. Rear of cart incorporates 1/2” stainless steel lattice for mounting support clamps or accessories. Glassware can be…

  • MIDI-VAP 4000 Distillation Systems

    DWK Life Sciences (Kimble)

    Ammonia/Phenols and Cyanide Models Available Corrosion resistant PTFE-coated glass 30" x 14.25" footprint Overtemp protection switch Automatic shutoff MIDI-VAP 4000 Systems feature a pre-programmed digital controller with automated shut-off when reaction time is completed. They use…

  • Short Path Distillation Sleeve

    …for distillation heads will keep your distillation setup at the peak of its performance. A right-facing observation window allows you to see exactly what is happening inside your glassware. A left-facing observation window allows you to see exactly what is happening inside your glassware.

  • Short Path Distillation Kit

    United Scientific Supplies

    … Short Path Distillation Head, Vacuum Jacketed, 24/40, 34/45 . . . . . . . . 2 Flask, Round Bottom, 3-Neck 10000ml 24/40, 34/45 . . . . . . . . . . . . . . . 1 Distillation Receiver, Cow-Type, 250ml, 1-to-3, 24/40 . . . . . . . . . . . . . . 2 Clamp for Jointed Glassware, Plastic, size 24…

  • Water / Crude Oil Distillation Apparatus

    DWK Life Sciences (Kimble)

    Conforms to ASTM D 4006 Apparatus is used for the distillation of water in crude oil. Apparatus includes 1,000 mL RB flask, 24/40 joints, Dean-Stark distillation receiver, dry trap and Liebig condenser Heating mantle must be purchased seperately

  • Monier-Williams Sulfites Distilling Apparatus

    Wilmad-LabGlass - SP Scienceware

    Used for the determination of sulfites in food and related product, this Monier-Williams Sulfites distilling apparatus is made of borosilicate glass and has Standard Taper 24/40 outer and inner joints. The complete unit consists of a special outlet adapter with a double bend, a 300mm long Allihn…

  • Distilling Tube Connector


    Standard Taper 10/30 thermometer opening, distilling, three-way, Standard Taper joints Sidearm is at an angle approximately 75° from the lower part of the vertical tube The joint on the sidearm is at an angle approximately 105° from the sidearm The sidearm and lower tube are…

  • PYREX® Distilling Tube Adapters


    60° angle Three Standard Taper 24/40 joints Approximate length 206 mm This tube is also a replacement for organic chemistry kits. Type I, Class A borosilicate conforming to federal specification DD-G-54 lb and ASTM E 438. Also meets the US Pharmacopoeia specs for Type I borosilicate glass.

  • KIMAX® Distilling Apparatus

    DWK Life Sciences (Kimble)

    Bent angle of 105°, with Standard Taper joints on inlet and outlet ends and inner drip-tip which bypasses vacuum take-off tubulation Has drip-tip at exit end Side-arm accepts 5/16” i.d. flexible tubing Made from Kimax® Brand KG-33 borosilicate glass, which features a low coefficient of…

  • General Purpose Distilling Apparatus

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass apparatus are used in general purpose and phenol distillation. They are useful for batch production of high purity water. Complete unit consists of a flask with a flat bottom and distillation head having Standard Taper 19/38 joint, Standard Taper Stopper, and Graham style…

  • PYREX® Distilling Flasks


    Suitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No. 4;…

  • Crank Case Oil Dilution Distilling Receivers

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass distilling receivers with inner and outer Standard Taper joints are used to determine the amount of dilution in crankcase oils when gasoline has been used as fuel. Receiver design keeps heat-sensitive materials away from the hot base of the flask. Calibrated "to…

  • Labjaws Nester Extension Clamp


    Firmly grasps glass distillation columns of varying sizes and odd-shaped glassware Constructed of stainless steel with strong, chromed-brass band and chain Offers a 152mm (5.98") long extension arm The flat thumbscrew/worm-drive design permits maximum tightening and quick removal

  • Hei-VAP Value “The Collegiate”


    …speed and bath temperature Optional Manual Vacuum Controller for easy distillations Glassware: G1B glassware is a diagonal coil condenser G3B glassware is a vertical coil condenser G5B glassware is a dry ice condenser Note: If a controller is purchased, a Hei-VAP…

  • RV 8 With Vertical Glassware, 100 V

    IKA Works

    …extremely efficient use of the 1500 cm² cooling surface. Digital displays for speed and heating bath temperature enable optimum control of all distillation processes. New: 4 l heating bath integrated safety lift-out function in case of power failure package includes Woulff bottle …

  • Aquatron® Water Stills

    Techne (Cole-Parmer)

    distilled water for higher purity levels. The first stage distillation is carried out in a glassware set mounted at the front of the cabinet allowing easy access for descaling. The distilled water is fed to a second set of glassware mounted at the rear and distilled a second time. The rear glassware

  • Tygon® S3™ E-3603 Laboratory Tubing

    DWK Life Sciences (Kimble)

    …to flex-fatigue and abrasion. It has heavy walls to withstand a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters. Phthalate-free and BPA-free Outstanding chemical resistance Non-oxidizing and non-contaminating…

  • 40L Water Storage Tanks for Fi-Streem III Glass Stills


    …the front of the tank. The optional distribution accessory kit allows for distribution of distilled product water to a glassware washer, point of use deionization (DI) system or any system requiring distilled water as a feed source, while leaving the spigot at the front of the tank free to manually…

  • Kem-Kit Semi-Micro 19/22

    DWK Life Sciences (Kimble)

    KEM-KITS contain a selection of basic small scale glassware for extraction, reflux, reflux with addition, fractionation, distillation (steam, atmospheric and vacuum), as well as for other organic preparations. The fourteen components itemized are supplied in a double-wall heavy-duty…

  • Chemistry Kit With 24/40 Components


    …foam The kit’s versatility enables many standard laboratory operations to be performed, such as: distillation, reaction with gas evolution, preparation or recovery, simple reflux, reflux with addition, fractional distillation and vacuum distillation. Case measures 130 x 256 x 343 mm.

  • Kem-Kit Semi-Micro 14/20

    DWK Life Sciences (Kimble)

    KEM-KITS® contain a selection of basic small scale glassware for extraction, reflux, reflux with addition, fractionation, and distillation (steam, atmospheric and vacuum), as well as for other organic preparations. Fourteen components are supplied: Bleed Adapter, Claisen Adapter,…

  • Chemistry Kit with 19/22 Standard Taper Joint Components


    …this kit. The kit’s PYREX® components all use 19/22 Standard Taper joints for standardization. It includes a distillation column and bleed tube for steam distillation or gas flow reactions. The components of the kit are held in foam within a polyethylene case. The overall case size is…

  • Blue/White Cloning of a DNA Fragment & Assay of ß-galactosidase Kit


    …oven, two waterbaths, shaking incubator or shaking waterbath, microwave or hot plate, automatic micropipet and tips, spectrophotometer, balance, centrifuge, microcentrifuge, glassware and cuvettes, distilled water, ice. Storage: Some Components Require Refrigerator and Freezer Storage

  • XtremeFLEX® BWH-D Dual Element Heating Tapes


    …heater element design increases flexibility Ideal for wrapping around and heating a wide range of laboratory glassware and apparatus: graduated cylinders, flasks, beakers, distillers, tubing, and more Connects easily to your choice of temperature control Includes high-temperature tie-downs…

  • VitroKit

    DWK Life Sciences (Wheaton)

    …contains following assortment: Claisen adapter; connecting adapter; thermometer adapter with Neoprene bushing; vacuum distilling adapter; 200 mm West condenser; 200 mm distilling column; 125 mL separatory funnel with Teflon ® stopcock plug; Teflon ® stopper; gas inlet tube; and five…

  • Chemistry Kit with 14/20 Standard Taper Joint Components


    …343mm. For more detail on individual components of the kit or to reorder replacement parts, refer to the specific catalog numbers. 190mm Distilling Column (2155-14) 190mm West Condenser (2705-14) 25mL Round Bottom Boiling Flask (4321A-25) 50mL Round Bottom Boiling Flask (4321A-50) …

  • Bidwell-Sterling Moisture Traps

    Wilmad-LabGlass - SP Scienceware

    …these Bidwell-Sterling moisture traps are calibrated "to contain" (TC) at 20°C and are used for determining moisture in samples by distilling with an immiscible liquid. Consist of vapor tube, return tube, round bottom graduated tube, and Standard Taper 24/40 inner and outer joints. …

  • Chemware® PTFE Boiling Stones

    Saint Gobain

    …during reflux and distillation. The boiling stones are not affected by acids, hydrocarbons, ketones, esters, alcohols or alkalis. They are easily cleaned and non-contaminating. Shows no trace of face acidity or alkalinity. They will not scratch or abrade glassware and leave no residue.…

  • Reactor Support Frame


    …and Lid, Holding it More Securely and Allowing Easier Installation/Removal of Glassware.  Motor Mount for Electric or Air Motors.  Open Air Design Provides Excellent Accessibility to Reactor and Glassware Components.  Lower Support Plate has a “V” Shaped Opening…

  • Bidwell-Sterling Moisture Traps with Vapor Connection

    Wilmad-LabGlass - SP Scienceware

    For the determination of water in petroleum and bituminous materials, these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.