Dispersion Tube

Compare Tool

Select up to 3 products

Dispersion Tube
1 - 32 of 68
Sort
View
Show
  • Large capacity gas dispersion tube having a frit 25mm O.D. x 70mm long. Stem is 16mm O.D. x 200 mm above the frit. Overall length is approximately 280mm.

  • Scienceware® Gas Dispersion Tubes

    Bel-Art - SP Scienceware

    …fitting with a sealed-in, coarse porosity polyethylene disc at the large end results in smaller bubbles. 30.5cm long (12") x 6.35mm ID (1/4") low-density polyethylene tube is fitted to the other end Suitable for insertion into small openings Bell O.D.: 2.54cm (1")

  • Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

  • Gas Dispersion Tube, Fritted, Synthware, Disc Diameter: 10mm, Disc Porosity: Extra Course, Course and Medium available, Stem OD: 8mm, Stem Length: 150mm

  • Micro size gas dispersion tube having a frit 7mm O.D. x 12mm. Stem is 6mm O.D. x 100mm long.

  • Gas Dispersion Tube, Fritted, 15° Angle, Synthware, Disc Diameter: Available in sizes ranging from 10-40mm, Porosity: Medium, Course or Extra Course available, Required Opening Diameter varies, The 15° angle permits tube to be inserted into vessels where a large opening is not available.

  • Gas Dispersion Tube, Fritted, 90, Synthware, Disc Diameter: Available in sizes ranging from 20-40mm, Required opening diameter varies , Porosity: Medium, Coarse or Xtra Coarse available, Stem OD: 8mm, Stem Length: 150mm, The 90° angle permits bubbles to be spread over a large area.

  • …with a stable extended base for use in precipitating elements from gas. Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion disc Silicone stopper holds 6.3mm (1/4") O.D. tubes for entrance and exit of gas 0.5 psi maximum pressure

  • These PYREX® tubes have a coarse porosity (40 to 60µm) fritted disc at an angle of 90° and are used to disperse or scrub gas in liquids. The approximate overall dimension across the disc and stem is 35mm for a 20mm disc. For more information on fritted products, please check the Guide to Selecting…

  • Supplied with 6, 7 or 8mm O.D. stem tubing, 150mm in length. Maximum O.D. of stem and filter disc is 20mm. Filter disc is 10mm diameter, porosity B (70-100 m).

  • Disc diameter 10mm, length 150mm. Disc approximately 2mm thick. Outside diameter of tube 7mm.

  • Outside diameter of tube 8mm, total length of tube 150mm.

  • Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

  • Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

  • For fine dispersion. Porous tip approximately 5mm or 7mm O.D. x 10mm. 7mm O.D. Tube fits #7 Ace-Thred. Offered with Porosity A (145-174 micron), Porosity B (70-100 micron), Porosity C (25-50 micron), Porosity D (10-20 micron), or Porosity E (4-8 micron

  • Fritted disc is angled approximately 15 degree from stem, which permits the small gas bubbles to rise from the disc surface without excessive formation of large bubbles. These tubes give a performance compared to a horizontal disc, but the method of co

  • With porous fritted glass tip. Available in 150mm and 300mm lengths. O.D. of both lengths, 10mm. Fits through #11 Ace-Thred.

  • V-32 Multi Vortex Mixer

    Grant Instruments

    …pellets in tubes up to 1.5 ml, with the facility to mix individual tubes up to 15 ml. Adjustable speed control: 500 to 3000 rpm ‘Continuous’ or ‘touch/quick’ operation Handles up to 32 tubes in three different sizes/combinations or a larger tube with the…

  • These PYREX® gas dispersion tubes have a 30mm diameter coarse porosity (40 to 60µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however greater…

  • Gas dispersion tube with porous fritted tip for use with #7 Ace-Threds. Tube is bent 15 degree to allow positioning inside flask to avoid stirring paddles and yet reach close to bottom of flask. Specify porosity and length or code when ordering.

  • Tube 30EC

    Corning

    These PYREX® gas dispersion tubes have a 30mm diameter extra coarse porosity (170 to 220µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller…

  • Gas Washing Tubes

    DWK Life Sciences (Kimble)

    Choice of coarse or extra coarse porosity cylinder Gas dispersion tube has a hollow fritted cylinder at the end of the tube. Cylinder height x o.d.: 24 x 13 mm. stem diameter: 8 mm. Overall height: 250 mm

  • ceramus®-classic

    Hirschmann

    …unscrew in seconds. Unique screw-coupled suction tube ensures the dispenser is absolutely leak-proof. It can be used in a wide temperature range (4°C to 50°C) without any loss in functional reliability or accuracy. Precise and reproducible volumes dispersed with accuracy of at least 0.5%. Available…

  • Disperse, stir, homogenize and grind using a single drive unit No possibility of cross-contamination Hermetically sealable disposable sample tubes No cleaning required High level of user safety Suitable for individual use and use in series Gamma-sterilized tubes Tubes with…

  • …analyte dispersion into solid phase pores Independent investigators have found ENVI-Carb extremely useful for the rapid sample preparation of over 200 pesticides from various matrices including ground water, fruits and vegetable Solid phase extraction apparatus uses glass vials or tubes

  • …seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements. Thomas Nos. 1203C36 and 1203C37 Incl. 1 Disposable tube Plastic materials used approved by FDA.

  • …strong 5 mm vibration orbit yields the best results even with high viscosity media or solids out of solution and quickly gives a smooth and even dispersion Switch to continuous mode - the unit performs a permanent vibration motion Switch to automatic mode - the units will start once a vessel…

  • Porous fritted glass filter stick used to fabricate gas dispersion tubes. Measures 10mm O.D. x 20mm long, hollow at one end. Packed 6 per package. Minimum order, one package.

  • 50 ml for attaching onto plastic tools from S 18 D and S 25 D series. Allows dispersing in a closed system (splash guard).

  • …of air at low jet velocity, as per EPA Method 6. Impinger bottle is graduated from 5 to 30mL in 5mL subdivisions. Both the bottle and stopper have 24/40 standard taper joints. The nozzle being replaced with an extra coarse fritted gas dispersion tube which enhances absorption by trapping the liquid.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.