Dilution Water

Compare Tool

Select up to 3 products

Dilution Water
1 - 32 of 692
Sort
View
Show

polyscience

  • Dilution Water, Organic Free, 500 mL

    Hach

    Dilution Water, Organic Free. For UV-254 and TOC methods. 500 mL bottle.

  • Dilu-Lok II™, Deionized Sterile Water

    Hardy Diagnostics

    Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers and solutions available from Hardy Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air…

  • BOD Nutrient Buffer Solution Pillows 6L Pk/50

    Hach

    BOD Nutrient Buffer Pillows Use for preparing BOD dilution water Ready for immediate use 6-L size powder pillows Each pillow prepares 6 liters of dilution water 50/pk

  • Sample Dilution Kit

    CHEMetrics

    …sample dilutions (10x, 25x, 125x, 250x, 500x, 1000x and/or 5000x), except distilled water: 3 mL syringe (A-0063), 5 MiniPets® (10 uL, 25 uL, 50 uL, 100 uL, 200 uL), 30 pipette tips (A-0171), 25 mL sample cup (A-0013), 50 mL sample cup (A-0058) and instructions.  NOTE: Sample dilution

  • Prefilled Dilution Buffers

    GVS Filter Technology

    For sample dilution of water, dairy products, foods and pharmaceuticals prior to microbiological testing Prefilled and sterile Easy open flip-top container Tamper-evident seal Butterfield’s Buffer, pH 7.2 ±0.2, contains monobasic potassium phosphate and is used…

  • Magnesium Chloride And Potassium Dihydrogen Phosphate Water Concentrate Pillows5

    Hach

    Buffered Dilution Water Pillows, pk/25 (magnesium chloride and potassium dihydrogen phosphate, makes 25 L dilution water; 1 liter per pillow.)

  • Bleach Concentrate Dilution System

    Activate

    Sprayer automatically mixes bleach concentrate with tap water at a 10:1 water-to-bleach solution as it is sprayed Lemon-scented Ergonomic design Spray or stream settings The Activate® 10:1 Institutional Bleach Concentrate Dilution System is an innovative, dual-cartridge, trigger sprayer that…

  • SigmaClean® water bath treatment, bottle of 4 oz

    MilliporeSigma

    …about 8 gallons (or 30.2 L) of water. These instructions provide an extremely concentrated bath solution. S5525 is still effective even at 0.0025 oz of the treatment to 1 gallon of water. Please note: If you go below 0.0025 oz, the treatment will be too dilute to be effective. Legal…

  • Calcium Chloride Solution for BOD

    Hach

    Dilution water component for Biochemical Oxygen Demand determination, APHA formulation.

  • Magnesium Chloride / Potassium Phosphate Buffer, 99 mL5

    Hach

    Magnesium Chloride/Potassium Phosphate Buffer, 99 mL Buffered Dilution Water (required for testing non-potable water) pk/25

  • Water Hardness Standard

    Inorganic Ventures

    …Assurance guidelines. One year Expiration Date . Size: 500 mL Matrix: Water (tr. Nitric Acid)  (H2O / HNO3) Starting Material: Multiple materials Dilution: — Documentation: Certificate     MSDS

  • KIMAX Milk Dilution Bottles

    DWK Life Sciences (Kimble)

    …liner is suitable for autoclaving up to 121°C 1756K30 is useful for water sampling and for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles given in the Standard Methods for the Examination of Dairy Products,…

  • Dilution Pouch with Butterfield's Buffer

    3M Food Safety

    …use only. Butterfield's Buffer is used as a diluent for the preparation of dilutions for sample dilution of water, dairy products, and foods prior to microbiological testing processes. It may also is used to dilute “washed” samples of cattle or swine to be tested for generic E. coli.…

  • PAHs - WP Concentrate for dilution to 1L

    MilliporeSigma

    …sample volume was 1000 mL. Matrix Modifier: MMW-001 is intended to modify the products to simulate a waste water sample. The final dilution will replace the use of DI (Reagent Grade) water for the preparation of the appropriate CRM/QC sample. The sample will add turbidity and TSS to the final…

  • Deionized Water

    Hardy Diagnostics

    For the preparation of dilutions and suspensions.

  • AquaPur™ ST Purified Water

    Decon Labs

    AquaPur™ ST is sterile purified water for use in dilution of sterile disinfectants, manufacturing, general laboratory and cleanroom applications. Purified water is filtered to 0.2µm, irradiated to a SAL 10-6 and tested for sterility and endotoxin using current USP method. Meets USP and…

  • Diquat/Paraquat/Glyphosate in Drinking Water

    MilliporeSigma

    …of analysis. Other Notes Values of analytes vary lot to lot. Some lots may not contain all analytes. Packaging A two-standard set for dilution into reagent water. • Standard 1 (QC0-097-1) Diquat Glyphosate Paraquat • Standard 2 (QCI-097-2) Endothall

  • Pico™ All-in-One Water System

    Avidity Science

    …Type 2 DI (deionized) water or Type 3 RO (reverse osmosis) water, and include a built-in 35 liter reservoir tank.  Energy efficient and budget friendly, Pico costs less than one penny per liter of water produced. Versions are available to produce pure water at 10 liters or 20…

  • Cell Culture Grade Water

    Quality Biological

    …level of less than 0.06 EU/ml. Produced under high quality industry standards to ensure superior results. Applications Making solutions and diluting buffers For use in the preparation of cell culture media, and cell suspension and washing solutions Product Contents RO Water

  • Dilu-Lok II™, Peptone Water 0.1%

    Hardy Diagnostics

    Peptone water meets or exceeds requirements for CFTA, EPA, USP, and APHA in cosmetics, pharmaceutical, and water industries. Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers…

  • Dilu-Lok II™, Buffered Peptone Water

    Hardy Diagnostics

    Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air transport. Wide 45mm opening accommodates bulky samples. Also features plenty of head space for large…

  • Carbamates in Water - WP

    MilliporeSigma

    …Volumetric Flask with 990 mL of organic free reagent water. ***NOTE: The dilution has changed from previous studies.*** Open the ampule and pipet exactly 1.0 mL of the concentrate into the flask. Bring the flask to volume with reagent water. Stopper the flask and mix well. This represents…

  • BBL™ Prepared Tubed Diluent Water

    BD

    Water may be used in laboratory procedures, e.g., preparation of dilutions of reagents and suspensions of microorganisms.

  • 6020 Spike Standard - Water

    Inorganic Ventures

    Inorganic Ventures' 6020 Spike Standard - Water is a 125 mL certified reference material set in a nitric acid matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …

  • Geno™ Type 2 Deionized Water System

    Avidity Science

    …save you money The Geno takes RO water to the next level of purity, providing DI laboratory grade water in three convenient production rates of 10, 20 or 50 liters per hour. The  Geno combines all the latest technologies to produce DI water. The Endure DI packs are simple to change…

  • Primary Safe Drinking Water Act Standard #3; Mercury Standard

    Ultra Scientific

    1 Analyte(s) @ 100 µg/mL in water with dilute nitric acid

  • 1000 ppm Tungsten in Water for ICP

    Inorganic Ventures

    …is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . Size: 125 or 500mL Matrix: Water (H2O) Starting Material: Ammonium Metatungstate Dilution:

  • Pyrethroids in Waste Water - WP

    MilliporeSigma

    …to volume with reagent water. Stopper the flask and mix well. This represents the sample for analysis. Matrix Modifier MMW-001 is intended to modify the products to simulate a waste water sample. The final dilution will replace the use of DI (Reagent Grade) water for the prepartion of…

  • Buffer Solution, Phosphate, for BOD

    Hach

    Dilution water component for Biochemical Oxygen Demand determination, pH 7.2.

  • Magnesium Sulfate Solution for BOD

    Hach

    Dilution water component for Biochemical Oxygen Demand determination, APHA formulation.

  • Cerium(IV) and Dilute Nitric acid, Etchant Solution, Ce(IV) concentration 0.25N

    Alfa Aesar

    …clothing/combustible materials. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container in accordance with…

  • BOD Nutrient Buffer 4ml Powder Pillows

    Hach

    For preparation of BOD5 dilution water. BOD Nutrient Buffer Pillows Use for preparing BOD dilution water Ready for immediate use 4-mL size powder pillows Each pillow prepares 4 liters of dilution water Pack of 50 pillows

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.