Dilution Plate

Clear polystyrene construction Choice of round, flat or V-bottom design These plates are ideal for solution-based assays, serial dilutions and general storage applications. Built to proposed industry standard footprint. Each well holds from 320 to 360 µl depending on which well geometry is…

…substances. Yeast extract supplies Vitamin B-complex. Generally pour plate technique is followed. The samples are diluted and appropriate dilutions are placed in Petri plates. Sterile molten agar is added to these plates and plates are rotated gently to ensure uniform mixing of the sample with agar.…

…B complex. APHA recommends pour plate technique. The samples are diluted and appropriate dilutions are placed in petri plates. Sterile molten agar is added to these plates and plates are rotated gently to ensure uniform mixing of the sample with agar. Plate Count Agar is also used for the estimation…

…Vitamin B complex. BIS recommends pour plate technique. The samples are diluted and appropriate dilutions are placed in petri plates. Sterile molten agar is added to these plates and plates are rotated gently to ensure uniform mixing of the sample with agar. Plate Count Agar is also suitable for…

… Allows for serial dilution procedures Polypropylene construction Works on most robotic instruments Optional cover Specially designed covers can be used to separate each well via a sealing ring. This reduces cross-contamination and allows for stacking the plates. Plates and covers work well…

…circle and 25 microliters outer circle. Pour plating mode : the sample is dropped on the plate (and then mixed with agar) 1 disinfection + 5 dilutions + 1 plating 10-5: 2 min. 13 sec. 1 disinfection + 5 dilutions + 6 platings of each dilution: 4 min. 4 sec. USB programmable…

…sensitivity if a 1:5 dilution of product is made. A 2-coliform-per-gram sensitivity is achieved if a 1:10 dilution is used. Whether testing milk, ice cream, cheese, or other food products, testing labs can benefit from the labor savings of 3M Petrifilm Plates. These plates reduce overall testing…

…APHA recommends the use of pour plate technique. The samples are diluted and appropriate dilutions are added in Petri plates. Sterile molten agar is added to these plates and plates are rotated gently to ensure uniform mixing of the sample with agar. The poured plate count method is preferred to the…

…Low RPM for long service life DuoSeal Vacuum Pumps are known for their ruggedness world-wide. These pumps have large oil reservoirs to dilute contaminants. Low pump rpm to reduces friction and wear while minimizing reservoir temperature to lessen chemical reactivity. Pump can be ordered…

1.1ml or 0.65ml capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and…

1.1ml or 0.65ml capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes…

1.1ml or 0.65ml capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and…

…and Intrinsically safe dilution process Direct radial mixing for constantly high data quality Simple and easy replacement of existing dilution protocols Pays off quickly and preserves resources Swiss Quality ensures long term reliability Dilutions reduced to sampling …

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use3. Dilute as needed, and dispense 150 muL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires…

…protein. Note: Pre-warm the coating solution to approximately room temperature before use.3. Dilute as needed, and dispense 1 mL of solution into each well to coat the surface. Note: Recommended dilution for PureCol Type I collagen is 1:30 (~100 mug/ml). Note: The hydrophobic surface requires larger…

…plate contains 8 ouchterlony patterns consisting of a center well and 6 outer wells. The plates are prepared especially for the MP polyclonal antisera to human IgG subclasses. When using these antisera for typing immunoglobulin subclasses in patients with myeloma , the sera must be diluted so…

48 deep well plates are suitable for storage & dilution and have distinct alpha-numeric designations. Each well bottom has rounded corners and chamfered edges to eliminate dead space during mixing. These plates have the same footprint as our 96 well plates. Polypropylene lids are available. EZ…

…deep well plates are available in both transparent polystyrene and clarified polypropylene copolymer. They can be used with 8-channel and 12-channel pipetters and are useful for specimen storage, dilution and DNA sequencing. 48 deep well plates are suitable for storage & dilution and have…

Non-sterile Round, flat or V-bottom well shape General assay plates are ideal for solution-based assays (i.e. Hemagglutination Assays), serial dilutions and storage applications. Each well holds 250 or 260 µL (V-bottom).

…with a flat base of 1.52mm. The design allows smaller volumes to be aspirated, reduces dead volume, simplifies dilutions, and delivers the most homogenous seal possible for the base of the plate. Compatible with automated systems. Nonsterile, non-pyrogenic, and DNase-, RNase-, and human DNA-free.

For the preparation of dilutions for plate count and other laboratory tests.

…mother-to-daughter automated plate pipetting, large sample dilutions and cell suspensions. Suitable for RNA extraction when used with 2600 Cryo-Station. Titer plates are made of polypropylene, with alphanumeric marks for well identification. Cap-Mats seal titer plate wells, preventing spills…

These plates allow users to quickly and easily apply any kind of sample, even large volumes of diluted samples. EMD Milliporeconcentrating zone plates are based on different adsorption properties of two adsorbents. The first is a large pore concentrating adsorbent where the samples are applied; the…

These plates allow users to quickly and easily apply any kind of sample, even large volumes of diluted samples. EMD Milliporeconcentrating zone plates are based on different adsorption properties of two adsorbents. The first is a large pore concentrating adsorbent where the samples are applied; the…