Dilution Bottles

Compare Tool

Select up to 3 products

Dilution Bottles
1 - 32 of 279
Sort
View
Show
  • …tissue culture 1756H31 bottles have mark at 99 mL level Phenolic cap, size 28-400, with rubber liner will withstand wet or dry sterilization (wet at 121°C) Approximate height: 150 mm Approximate cross section: 44 x 44 mm Meets the requirements for milk dilution bottles stated in the Standard…

  • Polypropylene Dilution Bottles

    Thermo Scientific Nalgene

    Resistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C (-40…

  • Polysulfone Dilution Bottles

    Thermo Scientific Nalgene

    …graduations at 90 mL for 1:10 dilutions and 99 mL for 1:100 dilutions; graduations accurate to 1 mL Bottle is transparent polysulfone for break resistance; leakproof screw cap is polypropylene, without liner 1756T10 cap size is 28 mm; 1756T20 cap size is 38 mm. Bottles can be marked with grease…

  • Flip-Top Dilution Bottles

    3M Food Safety

    …flip-top bottles of pre-mix dilutions. Benefits Hinged lid stays open for easy sample addition. Pre-mixed dilutions are ready for use with no additional blending required. Generous headspace and bottle opening size make sample addition easy. Leak resistant bottle reduces…

  • Prefilled Dilution Buffers

    GVS Filter Technology

    For sample dilution of water, dairy products, foods and pharmaceuticals prior to microbiological testing Prefilled and sterile Easy open flip-top container Tamper-evident seal Butterfield’s Buffer, pH 7.2 ±0.2, contains monobasic potassium phosphate and is used…

  • KIMAX Milk Dilution Bottles

    DWK Life Sciences (Kimble)

    …for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles given in the Standard Methods for the Examination of Dairy Products, published by the American Public Health Association. Bottles have a square cross section and…

  • Corning glass milk dilution wide mouth bottle (approximately 28 mm opening) eases the additions of dry solids or liquids. The bottle has a phenolic screw cap with a rubber liner that will withstand wet sterilization (121°C). The bottle meets the requirements for milk dilution bottles stated in the…

  • … 1 disinfection + 5 dilutions + 1 plating 10-5: 2 min. 13 sec. 1 disinfection + 5 dilutions + 6 platings of each dilution: 4 min. 4 sec. USB programmable volumes Filling time programmable by USB (for viscous samples) Sample mixing before dilution / plating …

  • …(1204B16) Wide mouth for easy filling or measuring. Cut-line graduation mark at 99 + or - 1 mL. (1204B17) Narrow mouth bottle with a cut-line graduation mark at 99 + or - 1 mL (1204B18) Meets requirments for milk dilution bottles from the American Public Health Association.

  • …original Nalgene bottle. Suitable for short term general purpose laboratory and field applications such as collecting samples and containing working solutions like buffers, bench reagents and dilute chemical aliquots. Thinner-walled and more flexible than the Nalgene Lab Quality bottle, but still…

  • Square bottle facilitates pipet entry and cleaning; wide mouth for ease in measuring and filling With cut-line graduation mark at 99±1 mL Includes phenolic screw cap, size 40-400, with cemented rubber liner Will withstand sterilization (wet at 121°C) Capacity: 160 mL

  • Formula: NaOH Formula Weight: 40.00 CAS Number: 1310-73-2 Description: For Dilution of Cyanide Standards

  • …the bottle or for dilution of the reagent in the receiver. Bottle Refilling Knob A – Closed, Knob B – Open. In this mode the liquid from a second source can be used to refill the bottle without dismounting the dispenser. Included adapters fit most laboratory reagent bottles.

  • Sulfuric Acid, Dilute R

    Ricca Chemical

  • Autofil™ PETG Storage Bottles

    Foxx Life Sciences

    …storage bottles. The bottles are gas impermeable, available radiation sterilized, and are an ideal low cost choice for general laboratory solution storage. Each Autofil™ bottle has features that improve the handling of the bottle, especially when the bottle is wet. The bottle itself has…

  • …carrying of the bottle. The innovative cap also allows for easy uncapping, tightening, and bottle stacking and provides a large surface for bottle labeling. Flat Writing Surface SECUREgrasp™ Bottle Cap Additional Head Space to Allow 15% Dilutions Autofil™ Bottle Holds …

  • …carrying of the bottle. This innovative cap also allows for easy uncapping, tightening and bottle stacking, and provides a large surface for bottle labeling. Flat Writing Surface SECUREgrasp™ Bottle Cap Additional Head Space to Allow 15% Dilutions Autofil™ Bottle Holds …

  • Numbered BOD Bottles

    United Scientific Supplies

    BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5-day biochemical oxygen demand (BOD) test. Bottles are numbered to allow for convenient organization of samples. 300ml bottles also include a bar code. Glass robotic stoppers are…

  • Pre-filled 9mL Butterfield’s Buffer Dilution Bottles with Flip Top. Featuring an attached locking hinged-lid that stays open for easy use. Every bottle is pre-filled to 9 mL with an overall capacity of 13 mL.

  • 300 mL BOD Bottles with Pennyhead Stoppers

    DWK Life Sciences (Wheaton)

    BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…

  • Static Dilution Bottle 2L

    DWK Life Sciences (Kimble)

    The Static Dilution Bottle is a simple, inexpensive means to prepare, store and use standards of volatile organic compounds. Standards are prepared by injecting a small quantity of the pure compounds into the bottle and fully evaporating them with heating. Sample aliquots are withdrawn using a…

  • …is a clear colorless liquid with a pH of 7.1 +/- 0.2 at 25C. It can be stored at 2-25C (protected from light) for 12 months. Each box contains 4 bottles of 900 mL of fluid, with a screw cap with septum closure to reduce the risk of cross-contamination and optimize the disinfection procedures. …

  • …cell counters and benchtop dilutions. These vials are particle-free with an attached leak-proof polyethylene cap and are made from virgin polystyrene. Packaged in a sectioned box for ease of use. For Beckman Coulter® style blood cell counters and benchtop dilutions Particle-free ATP,…

  • BOD Bottles

    United Scientific Supplies

    BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5 day biochemical oxygen demand (BOD) test. Bottles are unnumbered and feature a penny head stopper.

  • Stopperless BOD Bottles

    DWK Life Sciences (Wheaton)

    …and dissolved oxygen.  All of the BOD bottles have large, permanently screened-on marking spots. The numbered versions of the 300 mL size bottles are supplied with bar codes for quick and accurate recording of bottle numbers. All of the bottles are manufactured from Type 1 borosilicate glass.

  • 300 mL BOD Bottles with Robotic Stoppers

    DWK Life Sciences (Wheaton)

    BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…

  • Nalgene Narrow Mouth Economy HDPE Bottles

    Thermo Scientific Nalgene

    …original Nalgene bottle. Suitable for short term general purpose laboratory and field applications such as collecting samples and containing working solutions like buffers, bench reagents and dilute chemical aliquots. Thinner-walled and more flexible than the Nalgene Lab Quality bottle, but still…

  • BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. BOD bottles have a specially designed…

  • Ammonia, Dilute R1, EP

    Ricca Chemical

  • Turk Blood Diluting Fluid

    Ricca Chemical

Compare Tool

Select up to 3 products