Die

Compare Tool

Select up to 3 products

Die
1 - 32 of 265
Sort
View
Show
  • Pellet Die

    Carver

    Form pellets for use in IR and X-ray spectroscopy Stainless steel die includes a fitting for vacuum source connection.

  • 13 MM KBR DIE

    PerkinElmer

    …bench top easy-to-operate press allows creation of the highest quality KBr pellets. It is used with the Evacuable KBr die to prepare high quality 13 mm pellets. Requires, but does not include the Evacuable KBr Die (51001144), the KBr Pellet Holder (04810949), and the Adjustable Adapter (L1060351).

  • Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021).

  • MINI DIE NEEDS HOLDER

    PerkinElmer

    This is the simplest solid sample device and is ideal for student use, where very low cost is an important factor. Two highly polished bolts turn against each other in a steel cylinder. The pellet is formed right inside thecylinder which becomes the sample holder. Once formed, the pellet cannot be…

  • MINI DIE HOLDER

    PerkinElmer

    Required but not included with Mini-Press (51002592).

  • … 40 mm Die Sleeve and Plunger: Used with 3614, 40 mm Evacuable Pellet Die and PrepAid Sample Binder. Forms stable XRF sample disks with binder matrix supporting small quantity of sample. Instructions included. 35 mm Die Set: To form 35 mm sample disks. Set includes evacuable die body, base,…

  • Permits off-line testing of pellet and tablet samples Holder works with standard BB2 production tooling in the Model C press. The set includes an anodized aluminum holding fixture, steel shims to adjust for various size samples and an anodized aluminum ejector.

  • DIE ASSY-DSC HIGH PRESSURE PAN

  • Replacement Lower Die for Sealer

  • Replacement Upper Die for Sealer

  • Circular paper rings to reinforce your KBr disks are available. If the amount of sample is limited there are also papermicroframes which reduce the size of the pellet to 11 x 2 mm.

  • 1mm Die Set for Quick Press

  • 7mm Die Set for Quick Press

  • This part is included with 51001144 (Evacuable Potassium BromideDie), but can also be ordered separately.

  • Square Dies

    Across International

    A set of square hardened steel dry pressing die for pellet presses, ready for you to make square pellets.

  • Cylindrical Dies

    Across International

    A set of hardened steel dry pressing die for pellet presses, ready for you to make diameter cylinder-shape pellets.

  • …Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement, rocks,…

  • Vacuum Dies

    Across International

    A set of hardened steel dry vacuum pressing die for pellet presses, ready for you to make cylinder-shape pellets in a vacuum condition.

  • Buret Clamps

    United Scientific Supplies

    Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

  • Easy-Retrieve Dies

    Across International

    A set of hardened steel trapezoidal split sleeve dry pressing die for pellet presses, ready for you to make cylinder-shape pellets. These die sets are professionally built for you to work with samples that tend to stick to the inner surface of the sleeve, trapezoidal split inner sleeves with…

  • The quick press consists of a handpress, a 7mm die set, and a metal collar. Micropellets can be prepared in the quick press by purchasing the optional 3mm or 1mm die. The KBr pellet is formed in a metal collar that fits into an adjustable pellet holder.

  • …bench top easy-to-operate press allows creation of the highest quality KBr pellets. It is used with the Evacuable KBr die to prepare high quality 13 mm pellets. Requires, but does not include the Evacuable KBr Die (51001144), the KBr Pellet Holder (04810949), and the Adjustable Adapter (L1060351).

  • Heated Dies

    Across International

    A set of hardened steel dry pressing die for pellet presses, ready for you to make cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250°C.

  • This part is included with 51001144 (Evacuable Potassium BromideDie), but can also be ordered separately.

  • Williamson Standard Kit

    DWK Life Sciences (Kimble)

    …Experiments are included. 748000-0000 is packed in a rugged polyethylene storage case (2-1/2" H x 13-1/2" W x 10" D) with a die cut foam insert 748000-0005 is in an EKONO-CASE™, a low-cost corrugated cardboard alternative to plastic They fit easily into lab bench…

  • Master Heat Guns

    Master Appliance

    …1000°F/540°C at 1740 watts High air flow rating: 23 CFM at 3000 FPM gets the job done fast Powerful high speed universal motor Sturdy die cast aluminum housing Double protected heating element housing Easily replaceable, reinforced, mica-insulated ceramic heating…

  • Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…

  • Die-Stage-for Autosampler Pan Seal

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.