Dewar
-
Dewar Accessories
Pope ScientificPope Lab Grade Dewars are supplied with stoppers for the wide mouth model and for the narrow mouth cylindrical Dewars. Need another one? Replacement stoppers can be purchased separately.
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Condenser, Dewar Type
Ace GlassDewar type condenser for use with dry ice or other solid cooling agents. Upper tube is 12mm O.D. At bottom is standard taper 24/40 inner joint.
-
SYNTHWARE Micro Dewar Condenser
Kemtech AmericaDewar Condenser, Micro Joints: 14/20 Inside Depth: 90mm Inside Diameter: 31mm Side joint is at 90 degree angle.
-
Stainless Steel Dewar Flasks
Crystal TechnologiesStore and transport low-temperature liquid gases or high temperature liquids. Dewar flasks are available in two sizes 1000ml or 500ml and come complete with vented stainless steel lids. Model SDF-1000 comes with removable stainless steel handle.
-
Cylindrical Form Dewar Flasks
Pope ScientificThese vacuum lab-grade standard dewars are manufactured for efficient use with liquid nitrogen (LN2) and other liquid gases Dewar vacuum flasks are made of double-walled borosilicate glass, fully silvered, evacuated to 10-5 and covered by a protective mesh. Evacuation tips and flask…
-
Benchtop HDPE Dewar Flasks
Thermo Scientific NalgeneCompletely safe for short-term storage of ice water, dry ice solvent and liquid nitrogen and for use in hot baths Chemical-resistant HDPE double walls are filled with urethane foam and can withstand temperatures from -196°C to +100°C Vented, insulated cover All sizes feature…
-
The smart, IoT and cloud management system monitors temperature and liquid levels simultaneously to provide accurate and real-time information on the critical parameters to ensure ultimate sample safety.
-
Portable Cryogenic Dewar
SPEX SamplePrepCryogenic Dewar designed for storing and dispensing small amounts of liquid nitrogen. Sturdy, aluminum, five-wheel roller base makes moving dewar from room to room safe and easy. Includes liquid withdraw device for dispensing liquid nitrogen directly into the Freezer/Mill at rates up to 8 liters per…
-
Condensers, Dewar Type
ChemglassCondenser has a large opening at the top for use with dry ice/acetone or liquid nitrogen. Condenser has a lower inner drip tip joint and hose connections with an O.D. of 10mm at the middle serration. NOTE: See CG-4519 For Solvent Recovery Traps used with Rotary Evaporators.
-
Condensers, Dewar Type
ChemglassCondenser has a large opening at the top for use with dry ice/acetone or liquid nitrogen. Condenser has an outer standard taper joint set at a 75º angle to the condenser body and a lower inner drip tip joint, both being the same size.
-
Outer Joints, Dewar Seal
ChemglassUsed in construction of apparatus requiring the outer member to be jacketed. Configuration of flare permits seal to be made without having to regrind the joint.
-
-
Low Form, Hemispherical Dewar Flasks
Pope Scientific…essential operations; not practical with standard cylindrical or spherical Dewar These operations include: Rapid freezing and recovery of tissue/organ specimens Ability to insert small flasks in Dewar Agitation in flask with magnetic stirrer Tempering of stirring rods,…
-
SYNTHWARE Dewar Type Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar Type Capacity: 250, 500, and 1000mL available Stopcock: Glass or Teflon Options available Stopcock Bore: 4mm
-
SYNTHWARE Tall Form Dewar Flasks
Kemtech AmericaDewar Flask, Tall Form, Metal Housing Capacity: 350, 665, 1000, 1900, 3500, and 4300mL available Interior Depth: 125, 195,190, 302 and 305mm available Interior Diameter: 70mm Flask has weighted base for stability and a full length aluminum housing which extends to the top rim. *Due to…
-
Laboratory Grade Cylindrical Dewar Flasks
SP Wilmad-LabGlassFor routine use. Furnished silvered, evacuated and with aluminum base. Not for transportation of Liquid Nitrogen. Properties Capacity mL: 1000 Inside Diameter Inches: 2-11/16 Inside Depth Inches: 11-7/8
-
Low Form, Cylindrical Dewar Flasks
Pope ScientificCylindrical glass liner for increased coolant capacity
-
SYNTHWARE Micro Dewar Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar, Micro Reservoir Capacity: 100mL Stopcock: Glass or Teflon options available 2mm Stopcock Bore
-
Suprasil Offset Nitrogen Dewar Flask for Bruker
SP Wilmad-LabGlassThese Dewar Flasks provide a convenient alternative to VT systems for studies at 77 K, and are silvered around the reservoir. 150mL flask lasts 60 minutes after a filling Offset reservoir is designed for cavities that have limited space between the reservoir and the drive shaft for the…
-
…or dry-ice 4 sizes available Our dewar flasks are rust-free, non-corrosive, hygenic and strong. Double-walled boroscilicate glass, vacuum pumped and silvered insures efficient storage, transport and use of liquid nitrogen and dry-ice. These Dewar Flasks have an all-stainless steel vented…
-
Economical Vented lid Suitable for LN2 or dry-ice 4 sizes available Blue metal cased economy Dewar Flasks are rust and corrosion resistant. Double-walled silvered boroscilicate glass, vacuum pumped insures efficient storage, transport and use of liquid nitrogen and dry-ice. Lid vent…
-
SYNTHWARE Low Form Hemispherical Dewar Flasks
Kemtech AmericaDewar Flask, Low Form, Hemispherical Multiple sizes available, with aluminum base to allow transfer of magnetic field. *Due to extra high vacuum, the Dewar flasks still have a rare possibility to explode, so working behind a safety shield in hood and always wearing goggles are strongly…
-
Aldrich® wide-mouth dewar flasks aluminum housing
MilliporeSigmaBorosilicate glass with protective aluminum or plastic mesh housing and extended aluminum base weighted for stability. Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC
-
Cylindrical Form Dewar Flasks With Extended Base
Pope ScientificSimilar to 5028M40 series, but aluminum base extends up to mouth of flask Without plastic mesh
-
Dewar Type PTFE Stopcock Vacuum Traps
ChemglassDewar style trap CONDENSERS designed for large volume solvent removal. Lower reservoir has a capacity of either 500 or 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration. Optional UHMW Lid prevents evaporation of dry…
-
-
Loose Lid Insulating Plugs for CG-1599-A and CG-1599-B S.S. Dewar Flasks.
-
Liquid Dewars
Horizon ScientificABS LD Class 4 Liter Liquid Nitrogen Capacity 0.19 Liter/Day Static Evaporation Rate Neck Diameter (mm): 35 Exterior Height (mm): 426.7 Exterior Diameter: 185.4 Designed for efficient storage of LN2 …
-
