Desiccator Grease

These All Clear Polycarbonate (PC) Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the…

Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the middle for easy lifting. …

…properly Desiccator body is resistant to solid desiccants, including acids and alkalines Convenient vacuum connection on body makes cover easy to handle Straight-bore design eliminates stopcock leakage No gasket necessary, no need to draw a vacuum to make cover airtight - only grease is needed …

…or wide. Unlike present small dome-shaped vacuum desiccators, the Secador® Techni-Dome® Vacuum Desiccator has space for multiple plates, racks, trays and instruments. Contents can be viewed from 360º through the desiccator's transparent polycarbonate top and bottom. This…

…awkward sized items.  These high strength desiccators will hold a full vacuum (29” Hg, 737 mm) at room temperature for 24 hours and remain airtight even if not under vacuum. The included gasket, with an application of vacuum grease assures a tight seal down to 0°C. The…

Desiccators are enclosures containing desiccants for preserving moisture sensitive products. These desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with…

… No gasket is necessary; grease makes polycarbonate cover airtight even without applying a vacuum Recessed rim keeps grease off benchtop when cover is set down Desiccator takes any standard 230mm desiccator plate (sold separately) Note: Desiccator is not autoclavable. Includes:…

…vacuum grease which can act as a possible lab contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum conditions, and is an excellent alternative to glass. Wide base provides superior stability Similar in dimensions to glass desiccators…

…to all solid desiccants. These desiccators have a transparent polycarbonate cover. The small size (3756C20) comes with a 140mm aluminium plate. The plate for the large size (3756C60) is sold separately. Clear polycarbonate (PC) cover has recessed rim to keep grease off benchtop when…

…reusable desiccant can be placed on or under this plate A neoprene O-ring assures a tight seal down to 0°C without the need for grease (ring will not be harmed if grease is used.) White polypropylene bottom can support incandescent crucibles on High Heat Minerit HD Ceramic Desiccator…

…attention to detail. Borosil® Desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. Porcelain plate, ground glass flanges. Rated to 9.6 PSI vacuum when properly cleaned and greased. Available from 100mm (XS)…

…dryness. The shape of the body allows easy removal of desiccant materials Simplified stopcock design minimizes chipping or marring of critically ground finishes during cleaning and assembly Valve is secured to the desiccator lid by a neoprene grommet located in the knob of the cover …

…any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen minutes. Non-vacuum desiccators are physically the same as vacuum desiccators; only difference is the absence of stopcock. Grease should…

…any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen minutes. Non-vacuum desiccators are physically the same as vacuum desiccators; only difference is the absence of stopcock. Grease should…

…molded arrow on the cap. A quarter turn from this position closes the desiccator. For ease in use and improved performance, it is recommended that the Standard Taper sleeve be lubricated with a silicone-based vacuum grease. The tubulation O.D. is approximately 10mm. Approximate bowl volume capacity…

Eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.

Eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.

…grease. Accessory of Abdos Desiccator. E11621 is spare accessory for all 150mm diameter desiccators. Each pack contains one Silicone ring for 150mm desiccator. Abdos Accessories: Silicone Ring Silicone O-ring assures tight seal down to 0°C without using grease. Accessory of Abdos Desiccator.…

These clear non-vacuum desiccators are manufactured from borosilicate glass and include a borosilicate glass lid with a molded-in knob. Clear glass provides excellent visibility and can be autoclaved. The rims of the desiccator and lid are ground glass and require greasing before use to create an…

For lubricating ground glass joints, glass stopcocks and valves, Tensette Pipets, and for sealing desiccators. Lubricant has low vapor pressure and resists attack by acidic and alkaline solutions. Hach products are intended for sale/shipment within the US only. International customers…

…thermowell (6-7mm OD) may be substituted for the purpose of employing a thermister, controller probe, etc. The 40/35 joint is PTFE-Clad, the outer member polished, thus avoiding the use of grease. The desiccant tube is improved with joint reversed. The heater operates on AC or DC up to 40v, 3 amps.

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The…

…also results in a clear mineral oil that will alert of contamination sooner if the oil becomes milky or cloudy. High Vacuum Grease This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be achieved. "The…