Delivery Tube

Compare Tool

Select up to 3 products

Delivery Tube
1 - 32 of 107
Sort
View
Show
  • DELIVERY TUBE

    Labconco

  • Delivery Tube

    Labconco

  • Delivery Tubes

    Dynalon

    Delivery Tube, 90 Degree Polypropylene (1211A62) Product Dimensions (l x w x h) : 2.06x0.271x6.5in Pre-bent rigid Polypropylene delivery tube in 90 degree  (A) configuration. Unbreakable in normal use; ideal substitute for fragile glass alternative. Suitable…

  • …removable 3383M95 receiver. Gauze tops are soldered to delivery tubes. Nickel-Plated Delivery Tubes: Standalone delivery tubes. Receiver must be purchased separately. Stainless Steel Delivery Tubes: Standalone delivery tubes. Receiver must be purchased separately. Rotors: With…

  • These Capillary Gas Delivery Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

  • These Capillary Gas Delivery Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

  • Microscale bent capillary gas delivery tube for transferring gases generated during reactions to storage containers, such as 9588 Sampling Reservoir. With inner joint.

  • With an outer standard taper joint at the top. The tapered delivery drip tube extends into open receivers.

  • … Use with semi-rigid tubing equal to or less than 1/8" (3.2 mm) OD Create a closed system using solvent reservoir caps to prevent hazardous vapors from escaping into the lab. Caps accept standard 1/4"-28 UNF(M) fittings to easily connect semi-rigid tubing. Anti-twist design allows…

  • Mp Delivery Cap

    DWK Life Sciences (Kimble)

    Three holes have 1/4-28 threads top and bottom with 1/8" I.D. holes through to accept 1/8" O.D. PTFE tubing. Body is PTFE. Supplied complete with three 1/4-28 CTFE plugs and a TFE/propylene o-ring.

  • Our most popular grade of tubing. Recommended for: Chromatography applications Gas delivery systems Lower pressures Inert applications Maximum temperature of 450°C in an inert atmosphere.

  • … Use with semi-rigid tubing equal to or less than 1/8" (3.2 mm) OD Create a closed system using solvent reservoir caps to prevent hazardous vapors from escaping into the lab. Caps accept standard 1/4"-28 UNF(M) fittings to easily connect semi-rigid tubing. Anti-twist design allows…

  • Wide Mouth Unitary Wash Bottles

    Thermo Scientific Nalgene

    Design eliminates contamination and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than…

  • …upstream of every GC. It consists of two components:. A re-useable tube holder that is installed into the gas delivery system. The use of polycarbonate provides see-through capability along with safety.. A purifier tube containing an indicating resin (changes color from black to brown when…

  • Calibrex Dispenser Tubing Feeds

    DWK Life Sciences (Wheaton)

    Autoclavable PTFE delivery Jet-Pen and extension tubing help dispense into vessels with maximum comfort within a 60 cm distance

  • Acid/Solvent Bottle Carriers

    Bel-Art - SP Scienceware

    The 16mm (5/8") opening in the cone design allows a delivery tube to be inserted so liquid does not have to be poured out. The shortened lid allows only the cap of the bottle to protrude for safer pouring. Both carriers hold standard US reagent bottles. Shatter resistant polyethylene…

  • Wash Bottle, 500 mL

    Saint Gobain

    Delivery tube is removable from cap Of translucent Teflon ® FEP especially suited for trace metal work

  • …Type S thermocouple Split-type design for simple insertion of the working tube Working tube made of material C 530 incl. fiber plugs for operation under air in scope of delivery Heating elements on support tubes provide for free radiation RSH: switchgear and control unit integrated in…

  • …Life Tubing Longest flexible life of any clear Tygon tubing Over 1,000 h pump tubing life at 0 psi Over 600 h pump tubing life at 10 psi Broad chemical resistance Extremely low particle spallation Contains no phthalate or BPA The Only Choice for Phthalate-free Tubing Non-DEHP,…

  • …operation (RSV) Split-type design for simple insertion of the working tube Working tube made of material C 530 incl. fiber plugs for operation under air in scope of delivery Heating elements on support tubes provide for free radiation RSV: switchgear and control unit separate from…

  • Distillation adapter with a top outer standard taper joint. Tapered delivery tube is bent at a 105º angle to the outer joint and extends into open receivers.

  • XX6602500

    MilliporeSigma

    Ultraclean and dispense small volumes of solvent by squeeze-bottle action. Hand-pressure operated dispenser with filter holder fitted with a delivery tube. Use to direct filtered solvent against surfaces.

  • Silicone Rubber Tubing

    DWK Life Sciences (Wheaton)

    … Autoclavable, radiation sterilizable Thomas No. 0914P11 Peroxide cured silicone tubing. Assembly consists of 1.5m (5 ft.) section of silicone tubing with a wall thickness of 2.3mm, a borosilicate glass sinker, and a polypropylene delivery nozzle Bulk tubing also available

  • Oxidation Cell, Complete

    DWK Life Sciences (Kimble)

    Conforms to ASTM D 2274 and D 943 Cell measures inherent stability of middle distillate petroleum fuel under accelerated oxidizing conditions. Cell consists of test tube, condenser and oxygen delivery tube

  • …the delivery of a sample to a test cartridge. Blood collection tube dispenser for Point of Care testing instruments Dispenses blood drops easy with no need to open collection tubes Dispenses one drop of blood onto test cartridge or cassette Fits standard glass or plastic blood tubes

  • …30-70 mm Scope of delivery: Pump ball, universal plug, cutter and 10 disposable delivery tubes OTAL pump with disposable delivery tube made of PE, for single use.In OTAL pumps the medium being transferred comes in contact only with the delivery tube.The disposable delivery tube can be replaced…

  • LDPE Wash Bottles

    United Scientific Supplies

    These bottles are made of translucent and low density polyethylene (LDPE). Solutions can be dispensed easily by lightly squeezing the bottle. The flexible polyethylene delivery tube can be directed wherever required.

  • Bel-Art Automatic Burets

    Bel-Art - SP Scienceware

    …buret readable to 0.05 mL; other burets readable to 0.1 mL Delivery end fitted into plastic push-button stopcock permitting drop-by-drop delivery Small screw clamp presets drop speed for repeat titration Polyethylene filling tube extends from buret top into bottle reservoir 10 mL…

  • Unitary Wash Bottles

    United Scientific Supplies

    The red color of these wash bottles provides a visual indicator that they may contain hazardous liquids.  Constructed of low density polyethylene, these bottles include a built-in delivery tube.

  • …soft PVC, for container openings of 30–70 mm Ø OTAL® hand pumps with PP delivery tubes, resistant to weak acids, alkalis and detergents. OTAL® hand pump with PVDF delivery tubes, particularly suitable for acids and alkalis, not for heavily oxidising acids and alkalis.…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.