Culture Cylinder

Compare Tool

Select up to 3 products

Culture Cylinder
1 - 30 of 30
Sort
View
Show
  • Culture Cylinders

    Bioptechs

    …When using Culture Cylinders with the Delta T, select the appropriate size cylinder for the protocol and place the cylinder into the center of the dish. Pipette the specimen into the cylinder. Then pipette media around the cylinder to a depth equal to the depth in the cylinder, thereby…

  • Cloning Cylinder

    Bellco Glass

    Cloning cylinders are used to surround a single cell to create homogeneous culture of cells rather than mixed population Flat end insures tight sealing with surface of culture dish

  • Glass cloning cylinder for cloning or isolating individual cells. Place cylinder into bottom of flask or Petri dish to isolate individual or small group of cells. Disinfectant chambers to be used as described in the 1992 J.A.O.A.C. Hard Surface Carrier Test.

  • …and cooling Optional stage adapters available to fit most brands of microscopes, Zeiss, Olympus, Nikon, Leica, EVOS, etc. Optional Culturing Cylinders may be used to barricade cells or suspended specimens in a dish; or to restrict and concentrate the growth and location of cells plated on…

  • …variety of cell and tissue cultures directly out of the box. The starter set includes: (1) Delta T™ Controller (1) 10pk of Delta T™ Dishes 0.17mm thick (clear)  (1) Coverglass Lid (1) Heated Lid with CO2 port (1) Culture Cylinder Pack, (1) 4mm, (1) 6mm, (1)…

  • For general and culture media use Sterile Highly legible graduations Economical Tip-resistant base Optically clear polystyrene cylinders are designed for sterile, accurate dispensing of culture media or other biological fluids. A polyethylene dust cover is included.

  • …directly and easily imaged within a Delta T Dish. The Delta T Membrane Adapter is easily adapted to accommodate many of the artificial membrane culturing products on the market. The device shown supports a Costar Transwell™ membrane. The bottom surface of the membrane is observable on an…

  • …a single cell or group of cells by surrounding them with this PYREX® glass open-ended cloning cylinder. Dip the end of the cylinder into sterile silicone grease before pressing to the bottom of a culture dish to create an isolated well. Cylinders are autoclavable or can be dry heat sterilized.

  • EDU System

    Bioptechs

    …looking to partner with educators to develop additional live-cell demonstration protocols. EDU Starter Set includes: EDU Controller Power Supply EDU Stage Adapter 1 pk of 10 dishes 1pk of 100 22mm Coverslips 22mm Glass Spacer Coverslip Weight 6mm Culture Cylinder

  • Class B Graduated Cylinders, TD

    SP Wilmad-LabGlass

    Featuring a reinforced bead and pouring lip, these Class B borosilicate glass graduated cylinders comply with ASTM E 1272. The 5mL size has a funnel top. Calibrated "to deliver" (TD) at 20°C and suitable for general laboratory use. Reference No. ASTM E 1272

  • Tissue Grinder 2ml PE Serrated Pestle

    DWK Life Sciences (Wheaton)

    This grinder has a serrated Teflon® pestle that disperses homogenate into the mortar cylinder more efficiently. These units are precisely constructed with completely interchangeable parts, allowing for easier replacement of parts so you don't need to keep pieces matched during cleaning. Grinding…

  • Flow Cell Assemblies

    IBI Scientific

    …The gamma irradiated, fully-assembled flow cell assemblies come in an airtight package and only need to be opened and connected to a reservoir of culture medium and a peristaltic pump to start your biofilm research. The flow cells allow for the use of traditional transmission light microscopy and…

  • …produce contaminate-free labware necessary to complete microbiology processes and workflows. Includes 15-18mm Culture Tube Insert (4573700), Retainer Top (4573900), 10-12mm Culture Tube Insert w/ Top (4573600), and 2 48-Pin Inserts (4574200). FlaskScrubber Analytical Kit outfits your…

  • Non-baffled flasks are ideal for growing, mixing and storing both aerobic and anaerobic cultures. Graduated to approximate volumes. Delong style neck is made to fit stainless steel or plastic closures, while reducing the amount of splashing that would reach the closure.

  • …to the base These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the central vertical tube, the lower end of which is fritted and below the surface of the…

  • …assay the Base Agar should be prepared on the same day as the test. For the cylinder method, a base layer of 21 ml is required. Once the base medium has solidified, seed layer inoculated with the standardized test culture can be overlaid. Even distribution of the layer is important. Storage…

  • …medium should be prepared on the same day as the test. For the cylinder method, a base layer of 21 ml is required. Once the base medium has solidified, Antibiotic assay medium No.1 as seed agar, inoculated with the standardized culture can be overlaid. Even distribution of the layer is important. …

  • …Each lot is certified for microbiological analysis to provide added assurance of reliable results. Easy to use. Unique squeeze separation of cylinder from base allows easy access to membrane. Individually bagged, disposable filter units prevent cross-contamination of samples. Available in…

  • Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • Inserts and Kit

    Labconco

    Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • Covers and Kits

    Labconco

    Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • Dispenser Kits

    Labconco

    Culture Tube Insert 10-12 mm size only. 48-Pin Insert securely holds smaller volume wide-mouth labware. Type 304 stainless steel with silicone tips to prevent scratching. For use in Labconco Upper or Lower, Standard or Spindle Rack. 10-Pin and 32-Pin Inserts also available. Graduated Cylinder

  • The QuikSip™ is a convenient bottletop aspirator that removes supernatants, cell culture media, and other liquids from dishes, flasks, culture bottles, centrifugation tubes, multiwell plates, and more. It is small, portable, and doesn’t require an external vacuum or power source. No…

  • …loss and premature breakage. 7X cleaning solutions should be of particular value in cell culture laboratories where any trace of chemical contamination can interfere with the growth of cell cultures in tubes or flasks. Product Description 7X Ready-to-Use premixed at a 5% concentration…

  • ES 7X™, Ready To Use

    MP Biomedicals

    …reducing weight loss and premature breakage. 7X cleaning solutions are of particular value in cell culture laboratories where any trace of chemical contamination can interfere with the growth of cell cultures in tubes or flasks. Features of ES 7X Cleaning Solution: Safe and effective …

  • ES 7X Cleaning Solution

    MP Biomedicals

    …reducing weight loss and premature breakage. 7X cleaning solutions are of particular value in cell culture laboratories where any trace of chemical contamination can interfere with the growth of cell cultures in tubes or flasks. Features of ES 7X Cleaning Solution: Safe and effective …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.