Cover Glass No 1

Manufactured from borosilicate glass with excellent clarity for microscopy use Available in both square and rectangular shapes Choose from three standard thicknesses: - No 1 (0.13 – 0.17mm) - No. 1½ (0.16 – 0.19mm) - No. 2 (0.17 - 0.25mm) Packaged in reclosable plastic boxes for…

These 25x25 square No.1 Corning® cover glasses are made from boroslicate glass and are 0.13 to 0.16mm thick.

Splash Shield with Glasses Frame Two-Piece Splash Shield is easy to assemble, lightweight and comfortable to wear! This Face Shield is made of .25mm polymer material, consists of a protective cover, eyewear frame and fixing device. Non-sterile, disposable. Application: Physical barrier…

…than tropical is highly improbable Thickness of Red Label Cover Glasses is controlled within the following tolerances: No. 0 - 0.085 to 0.13 mm thick, No. 1 - 0.13 to 0.17 mm thick, No. 11/2- 0.16 to 0.19 mm thick, No. 2 - 0.17 to 0.25 mm thick Sizes in widest use are…

…microscope cover glass is packaged: 1 oz per pack, 10 packs/box (10 oz). Each flip top pack contains a desiccant and is wrapped in aluminum to prevent sticking. Available in two thicknesses: No. 1: 0.14mm No. 1.5: 0.175mm Pack and Case: 1/Pk = 1 ounce 10/Cs…

…than tropical is highly improbable Thickness of Red Label Cover Glasses is controlled within the following tolerances: No. 0 - 0.085 to 0.13 mm thick, No. 1 - 0.13 to 0.17 mm thick, No. 1 1/2- 0.16 to 0.19 mm thick, No. 2 - 0.17 to 0.25 mm thick Sizes in widest use are…

…than tropical is highly improbable Thickness of Red Label Cover Glasses is controlled within the following tolerances: No. 0 - 0.085 to 0.13 mm thick, No. 1 - 0.13 to 0.17 mm thick, No. 11/2- 0.16 to 0.19 mm thick, No. 2 - 0.17 to 0.25 mm thick Sizes in widest use are packed in…

… No handle for easy stacking Non-toxic, medical grade silicone sealant #1 Borosilicate Cover glass is configured for 1, 2, 4 and 8 well unit. Cover is constructed of clear polystyrene. Non-removable media chamber is made of proprietary cell culture grade polystyrene. Cover glass thickness…

… Made from non-fogging, corrosion-resistant glass Thickness is controlled to the following tolerances: No. 0 is 0.085 to 0.13 mm; No. 1, 0.13 to 0.17 mm Lint-free plastic boxes with hinged lid. Cover glasses are packaged 1 oz. per box; case contains 10 boxes. Cases are wrapped…

Made of quality, non-corrosive glass. Thickness No. 1.

…instrumentation covering 750 mum to 450 mum range. Typical use is in the evaluation of wire-cloth test sieives in the range from No. 20 (850 mum) through No. 10 (2000 mum). The SRM consist of a single bottle containing approximately 200 g of sold spherical soda-lime glass beads. For more…

…ground glass surface post autoclaving. The funnel bottom is coated with PTFE. The PTFE flange covers the contact surface on the glass base(except for the sintered glass base). The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support…

Our microscope cover glass is packaged: 1 oz per pack, 10 packs/box (10 oz). Each flip top pack contains a desiccant and is wrapped in aluminum to prevent sticking. Available in 3 thicknesses No. 1 : 0.14mm No. 1.5 : 0.175mm No 2 : 0.21mm

…Publications No. 21. Cell is cut from plane glass plate and fused to a polished glass slide. 75 mm x 25 mm x 2 mm thick. Forms flat-bottom chamber of approximately 0.1 mL capacity. Furnished with two plane cover glasses, No. 1 1/2, thickness 0.16 to 0.19 mm, 22 mm square. For cover glasses, see…

Similar to 5971C10 Chamber, but for platelet count using phase microscope Without concavity beneath the rulings. No. 1 1/2 cover glass, 22 x 30 mm, should be used. Cover glass not furnished, see Thomas number 1208Q35.

…6501 For transport and storage of glass reagent bottle, 5-pint and 1-gallon capacity Neck and bottle cap are protected Clear polycarbonate lid allows for identification of bottle contents No need to remove bottle from carrier before pouring, Top twists off for removal from cover

…user customization. Each insert fits into the Recessed Platform (8294D48) 8294D77: plastic 3-inch (76mm) platform with rubber cover may be used on the Vortex-Genie 1 and the Vortex-Genie 2 family of mixers. 8294D80: two high-density foam inserts to accommodate up to 60 microtubes. This insert…

…The embedded cover glass guarantees an absolutely even focal plane which is prerequisite to high-speed and high-resolution microscopy. Furthermore, the black compartmentalisation reduces cross talk between adjacent wells during fluorescence microscopy and the optical glass with virtually no…

…standard 1 L side-arm flask or standard cup manifold. Funnels with covers can be vented aseptically using a hydrophobic syringe filter(13JP050AN). Units with covers are supplied with gum rubber caps. FPM O-rings are available. Aseptic System with Receiver also includes a receiver cover and the…

…protein- binding and is easy to clean Same funnel design as glass funnels without breakage problems Upper reservoir is graduated in 25 mL increments from 100 to 250 mL Unique fit of upper and funnel sections ensures no leakage or bypass even after autoclaving Membrane support…

…microscope (3” x 1”) microslide that serves as a common floor for all chambers; superstructure can be stripped from the slide for staining the cultures on the slide. Slide is 1.2 mm thick with frosted end for marking; single plastic lid covers all chambers and has no handles. …

…engineered individual counting chambers (100 mm depth) with integrated cover slip. The chamber has ports for sample loading. Neubauer Improved (NI) grid pattern is embedded in each chamber.  Each grid pattern has nine large squares each measuring 1 x 1 mm and a total counting area of 3 x 3 mm.

…Solution, 250mL  Acetic Acid Solution, 250mL  Resinous mounting medium, 6mL  Cover glass forceps (1)  Disposable Pasteur Pipets (5) Rubber bulb (1)  User Manual  Materials required but not included: Double distilled or deionized…

…full-featured and easy to use Platinum RTD temperature measurement for accuracy to ±1% PID temperature control to 1°C on plate surface Electronic calibration stored on chip, no batteries to replace Display all parameters simultaneously Ceramic or aluminum top UL,…

…model builders etc. Pen-Vac is ideal for EM work as well. It can be used to handle grids, pick up stubs, align membranes, work with glass slides, cover slips and much more. Holds up to one minute. Features: Lifts up to 50 grams Totally self-contained vacuum light-weight,…

…interior cover plates for access to plumbing and electrical wiring Compliance SEFA 1-2002 (Laboratory Fume Hoods) ASHRAE 110-95 (Method of Testing Performance of Laboratory Fume Hoods) ANSI Z9.5-1993 (Laboratory Ventilation) UL 3101-1/61010-1 CAN/CSA C22.2 No. 1010.1 …

…thickness cover glass bottomed dishes that have an electrically conductive, optically transparent coating of ITO on the underside. The coating is electrically powered to directly warm the contents of the dish. This is an exclusive technology to Bioptechs and provides features and capabilities no…

…clean - no glass dismantling necessary CE Marked Supplied with an instruction/operating manual All of the major components are available as spare parts Please note water still heating elements are excluded from our 3 year warranty and are only covered for 1000hrs use or 1 year,…

…glass condensation flask with self-sealing cover Single stage refrigeration system Efficient operation with all SpeedVac™ concentrators, and other vacuum-dependent equipment Optional post trap (model no. ANT100) may be added to neutralize ammonia or acid Chemical trap (model no.…

…the alpha-actinin band. Application: Anti-Actinin antibody was used to detect actinin in human mesangial cells. Cells were first grown on glass cover slips, fixed in cold methanol and permeabilized with 3.5% paraformaldehyde/0.1% Tween-20 for 5 min at room temperature. Application: Rabbit…

…pharmaceuticals. Silicone cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask…