Corning Sterile Bottle

The Corning Gosselin water sample collection bottle is designed to meet water sample collection requirements of the United States EPA and Health Canada. The lightweight polyethylene terephthalate (PET) 125 mL and 250 mL bottles are pre-dosed with pentahydrated sodium thiosulfate, which provides…

…for sterile media, buffers or other aqueous solutions. They also serve as replacement receiver/storage bottles for Corning sterile filter systems. Easy grip sides facilitate handling. Plug seal cap provides an airtight seal and helps minimize the risk of contamination. Bottles are sterile and…

Corning glass milk dilution wide mouth bottle (approximately 28 mm opening) eases the additions of dry solids or liquids. The bottle has a phenolic screw cap with a rubber liner that will withstand wet sterilization (121°C). The bottle meets the requirements for milk dilution bottles stated in the…

… Individually packaged bottles are sterilized by gamma radiation. Bottles can be autoclaved once at 121°C and 15 psi. Repeated autoclaving weakens polycarbonate and is not recommended. Caution: These square polycarbonate bottles should not be used with bottle top filler units, or in…

Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps…

Offset neck is tool-finished for increased strength and uniform stopper fit; uses number 5 rubber stopper Useful for growing mass cultures and single or monolayer cultures Will withstand repeated sterilization (wet or dry) Capacity 1,000 mL Stacks for easy storage

These 840cm2 PYREX® roller bottles are manufactured from borosilicate glass for optical clarity and mechanical strength and can withstand repeated wet or dry sterilization. All bottles have linerless, one-piece orange polypropylene plug seal caps with GL4

… Receiver bottles feature easy grip sides for improved handling Additional storage bottles can be purchased to increase capacity Bottle caps are supplied sterile and individually packaged Angled hose connector simplifies vacuum line attachment Individually packaged, sterile and certified…

For vacuum filtration of tissue culture or other aqueous solutions Sterile, individually packaged Fits 33 or 45-mm receiver bottles Certified non-pyrogenic Available with (CA) cellulose acetate, (CN) cellulose nitrate, (NY) nylon (500 mL size only) or (PES) polyethersulfone membranes. Pores…

…outlet (15mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 12 rubber stoppers. They can withstand repeated sterilization (wet or dry).

Features large knurls for ergonomic handling Contains hydrophobic membrane for applications requiring gas exchange Sterilized by gamma radiationDoes not fit 490cm² roller bottles .

Screw cap graduated bottles can be dry heat sterilized to 180°C when used with optional Melamine resin caps 1743E90 and ETFE pouring rings 1743E95.

Corning’s polyethylene terephthalate (PET) disposable bottles are designed for safe, secure storage of tissue culture media, sera, buffers, and other aqueous solutions. The PET resin makes the bottle lightweight, break resistant, and as transparent as glass. The screw cap is designed to ensure…

To be used with Tubing Set (Cat. No. 10043) Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures USP Class VI certified C-FLEX® tubing One piece seamless construction with printed…

… Non-pyrogenic Sterile Plug-type or quick seal cap for added leak resistance Seamless, one-piece construction and superior optical clarity. Made from virgin polystyrene. Heavier walls, non-serrated traction rings and printed graduations every 50 mL to 1,500 mL, make this bottle very convenient…

Heavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass…

Made from optically clear polystyrene Sterilized to SAL 10 -6 Corning polystyrene Storage Bottles are now available as closed system solutions. They are sterile and arrive individually double-bagged and peassembled. The preassembled transfer caps have two ports. One port ends in a…

…gas exchange. They also fit Corning disposable polystyrene and polycarbonate storage bottles and glass bottles with GL45 threads for applications requiring venting. Individually double bagged Features large knurls for ergonomic handling Sterilized (10?6 SAL) by gamma radiation;…

…outlet (10mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 4 rubber stoppers. They can withstand repeated sterilization (wet or dry).

Can be used with Corning bottle top filters These polystyrene bottles are ideal for storage of media, buffers and other aqueous solutions. Bottles are sterile and certified nonpyrogenic. Plug seal caps provide an airtight seal and help minimize the risk of contamination.

160 mL square narrow mouth bottle with screw top, for general storage of solutions and tissue culture 1756H31 bottles have mark at 99 mL level Phenolic cap, size 28-400, with rubber liner will withstand wet or dry sterilization (wet at 121°C) Approximate height: 150 mm Approximate cross…

…cell attachment Easy-Grip cap One-piece construction Sterilized Polystyrene roller bottles are recommended for 0.2 to 0.3 mL of medium per cm 2 of growth area and roller rack speeds of 0.5 to 1.0 rpm. Bottles are manufactured from virgin polystyrene, caps from high density…

…and storing sterile culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet) sterilization. Necks are tooled…

…cap Printed lot numbers aid product traceability Corning® CellBIND roller bottles feature a ribbed design that provides twice the surface area with the same exterior dimensions. Bottles are treated with the patented Corning CellBIND surface treatment for enhanced cell attachment. One…

…or dry sterilization These PYREX roller bottles are available in four cell growth areas: 840, 1170, 1330 and 1585 cm 2 . Roller bottles are manufactured from borosilicate glass for the strength to withstand repeated wet or dry sterilization as well as optical clarity. Bottles come supplied…

Square bottle facilitates pipet entry and cleaning; wide mouth for ease in measuring and filling With cut-line graduation mark at 99±1 mL Includes phenolic screw cap, size 40-400, with cemented rubber liner Will withstand sterilization (wet at 121°C) Capacity: 160 mL

Polyethylene terephthalate (PET) bottles are ideal for storage and sampling of media, biologicals, and other aqueous solutions PET resin makes the bottle lightweight and as transparent as glass Break-resistant bottles are an ergonomic and easy-to-handle alternative to glass Leakproof,…

… Bottles are leakproof Key Features: Good for storage of liquid, semi-liquid, and solid forms Available in six sizes: 50 mL, 100 mL, 150 mL, 250 mL, 500 mL, and 1L Large neck opening provides easier access for liquid transfer Bottles are sterile Bottles are…

…Bottles are leakproof Key features: Good for storage of liquid, semi liquid, and solid forms Available in six sizes: 150 mL, 250 mL, 500 mL, 1L, 2L and 2.5L Large neck opening provides easier access for liquid transfer Graduated bottles (except 150 mL) Bottles are Sterile…

…High thermal shock resistance Sterilize by autoclaving or dry heat Traceability code for easier documentation Permanent white enamel graduations and marking spot Available in three sizes: 500 mL , 1 L and 2 L These PYREX wide mouth storage bottles are designed as both heavy-duty…

…liquid transfer Screened white enamel graduations are easier to read thanmolded graduations Individually packaged bottles are sterilized to SAL 10- 6 Large white marking spot for easier identification Individually packaged bottles are sterilized by gamma radiation and are nonpyrogenic

…round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles…