Corning Glass Bottles

Compare Tool

Select up to 3 products

Corning Glass Bottles
1 - 32 of 64
Sort
View
Show
  • bottles should not be used with bottle top filler units, or in other applications involving vacuum pressure as breaking may occur. Do Not tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. Note: Most GL45 threaded caps designed for glass

  • glass Useful as a delivery/storage container for solutions Autoclavable Features a tubular sidearm outlet to facilitate attachment of flexible tubing. 250 mL bottles take size 2 rubber stoppers; 500 mL bottles take size 4; 1,000 mL and 2,000 mL bottles take size 6; 4,000 mL bottles take size…

  • …media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass bead…

  • …mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are furnished with…

  • These 42mL PRYEX® low form weighing bottles have an external 60/12 Standard Taper joint style opening. The closure style cap fits over the externally ground body.

  • Corning glass milk dilution wide mouth bottle (approximately 28 mm opening) eases the additions of dry solids or liquids. The bottle has a phenolic screw cap with a rubber liner that will withstand wet sterilization (121°C). The bottle meets the requirements for milk dilution bottles stated in the…

  • …for handling and storing sterile culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet) sterilization. Necks…

  • glass safety bottles provide good optical clarity and are mechanically durable. Can be marked with either permanent or temporary markers. 125 mL and 250 mL bottles are furnished with a number 19 stopper; 500 mL bottles are furnished with a number 24 stopper; 1,000 mL and 2,000 mL bottles are…

  • Corning 61596 Of borosilicate glass PVC-coated safety bottles are chemically and thermally resistant, have good optical clarity and are mechanically durable PVC coating helps contain glass and bottle contents if breakage occurs Can be autoclaved or microwaved to 121°C…

  • …refrigerators, autoclaves. Bottles are graduated to their full working volumes Available in four sizes: 125 mL, 250 mL, 500 mL, and 1 L Pyrex Slim Line bottles are made from the same Type 1 Class A (ASTM E-438) borosilicate glass as standard Pyrex media bottles for chemical and heat…

  • Patented heavy-duty bottle can be used for storage as well as mixing and sampling. A protective PVC coating helps prevent glass from shattering and reduces spills. Autoclavable (121°C) and resistant to thermal shock.  Bottle comes complete with autoclavable, one-piece, teal colored,…

  • Short length external Standard Taper joints PYREX® Parr weighing bottles are designed for use in weighing small samples. The closure style cap fits over the externally ground body.

  • Short length external Standard Taper joints These PYREX standard weighing bottles have an external Standard Taperjoint style opening. The closure style cap fits over the externally ground body.

  • Four sizes Borosilicate glass Wet or dry sterilization These PYREX roller bottles are available in four cell growth areas: 840, 1170, 1330 and 1585 cm 2 . Roller bottles are manufactured from borosilicate glass for the strength to withstand repeated wet or dry sterilization as…

  • Octagonal Bottles

    Corning® Gosselin™

    Molded Graduations every 25 mL Highly Ergonomic Leakresistant closure system Transparent as glass HDPE Tamper evident screw cap

  • 160 mL square narrow mouth bottle with screw top, for general storage of solutions and tissue culture 1756H31 bottles have mark at 99 mL level Phenolic cap, size 28-400, with rubber liner will withstand wet or dry sterilization (wet at 121°C) Approximate height: 150 mm Approximate cross…

  • …PYREXplus® borosilicate glass bottles offer good optical clarity and durability PVC coating helps contain glass and contents should breakage occur Autoclavable or microwaveable to 121°C (250°F) Resistant to thermal shock Bottle features a tubular sidearm outlet…

  • Capacity 3 1/2 gallons With 6-mm-bore, Teflon stopcock and overflow tube which takes 1/2” tubing Takes rubber stopper No. 11 1/2 Useful as a delivery/ storage container for solutions. Height 17 3/4”.

  • …round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles

  • Recommended for use in preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to an…

  • Short length Standard Taper joints Capacities from 35 to 82 mL These PYREX low form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.

  • These 500mL PYREX® aspirator bottles have a tubular sidearm outlet (10mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 4 rubber…

  • Corning’s polyethylene terephthalate (PET) disposable bottles are designed for safe, secure storage of tissue culture media, sera, buffers, and other aqueous solutions. The PET resin makes the bottle lightweight, break resistant, and as transparent as glass. The screw cap is designed to ensure…

  • Short length external Standard Taper joints PYREX low form weighing bottles have an external Standard Taper joint style opening. The closure style cap fits over the externally ground body.

  • …increases mechanical strength. These flasks are used in applications requiring rigid stoppering and as wash bottles in routine lab washing. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…

  • For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.

  • Carefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…

  • …resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a molded-in glass ring to indicate full capacity. Bottle includes one-piece…

  • …distilled water and standard solutions Of borosilicate glass All have heavy, welted neck but vary in size and shape. Bottles take stopper number 12. PYREX bottles are tough and reliable yet designed with safety in mind. PYREX bottles can withstand extreme temperatures. They are highly…

  • Short length Standard Taper joints Capacities from 7 to 85 mL These PYREX tall form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.

  • …terephthalate (PET) bottles are ideal for storage and sampling of media, biologicals, and other aqueous solutions PET resin makes the bottle lightweight and as transparent as glass Break-resistant bottles are an ergonomic and easy-to-handle alternative to glass Leakproof,…

  • Square bottle facilitates pipet entry and cleaning; wide mouth for ease in measuring and filling With cut-line graduation mark at 99±1 mL Includes phenolic screw cap, size 40-400, with cemented rubber liner Will withstand sterilization (wet at 121°C) Capacity: 160 mL

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.