Conductivity Probe

Compare Tool

Select up to 3 products

Conductivity Probe
1 - 32 of 118
Sort
View
Show
  • ATC-01 Temperature Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ATC-01 Temperature Probe/Electrode is ideal for use along with pH or conductivity electrode for temperature compensation to achieve automatic temperature compensation. Technical Specifications Material: Stainless Steel Temperature Range: -10 to 110°C (14 to…

  • …DuraProbe conductivity cells are ideal for high and standard conductivity samples and difficult samples such as wastewater, runoff water and mud. NOTE: To use with 555A 550A, 162A 135A, and 130A meters, the 1010900-WA Adapter (MiniDIN conductivity probe to 8 pin waterproof DIN conductivity

  • The CS200TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications. The CS200TC features platinized measuring surfaces that provide accurate and repeatable measurements. Rugged epoxy bodies make the sensors virtually unbreakable.…

  • Replacement Electrodes and Probes

    Milwaukee Instruments

    Milwaukee has a wide assortment of pH, ORP, Conductivity and other specialty sensors to meet all your specific requirements. Finding the right electrode for a specific application is a very important task and in order to solve this selection problem it is important to consider the following:…

  • …and ease of use. The HQD portable meters connect with conductivity Intellical smart cells addressing different sample types and operating environment for water quality, environmental and treatment process purposes. The Intellical probe automatically recognize the testing parameter, store the…

  • Conductivity Cells

    Jenway (Cole-Parmer)

    … 1200Q44 Glass free/epoxy K= 10 Bench 1200Q45 Ultra-pure water conductivity probe K< 0.1 Bench 1200Q46 PTFE-coated ATC probe for use with aggressive/corrosive samples NA 3540

  • …for use in cooling tower applications, the CS8300 inline conductivity sensor package is an economical option for continuous monitoring of conductivity and total dissolved solids. Constructed in a CPVC body with graphite electrodes, this probe is ideally suited for industrial applications that do not…

  • IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The standard version is available with a 3 or 1 m cable and is intended for laboratory use. The CDC401 is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater,…

  • Conductivity Tester

    United Scientific Supplies

    …of the conductivity of different solutions, acids or salts. Two brass probes can be touched to a solid substance, or immersed in a liquid, to show conductivity on green LEDs that range from 1 to 10. Each probe is 53mm long with a diameter of 3mm. Overall length of the meter and probes together…

  • MPP IDS – the digital multi-parameters (up to three main parameters) depth probes with built-in depth measurement to use in profile measuring Depth measurement of pH, conductivity, dissolved oxygen, turbidity - up to three main parameters simultaneously, including depth and temperature…

  • Our CS150 Contacting Conductivity Sensor delivers accurate, reliable measurements of conductivity and total dissolved solids (TDS).

  • …Measure InLab 738: A 4-pole conductivity probe with integrated temperature sensor and attached 1.8m cable. Recommended for general measurements in the field or factory. Nominal cell constant: 0.57/cm. InLab 738-10m: A 4-pole conductivity probe with integrated temperature sensor and…

  • Ions in Motion InLab 731: A 4-pole conductivity probe with integrated temperature sensor and attached cable. Ideal for general measurements in aqueous media. Nominal cell constant: 0.57/cm. InLab 731-2m: A 4-pole conductivity probe with integrated temperature sensor and attached…

  • Conductivity probe, General purpose "bull's-eye" design 4 cell, K=0.5 cell constant Epoxy body, graphite contacts 30K ohm thermistor 16mm dia x 110mm length 3 ft cable with Switchcraft waterproof connector Range 0 to 100,000 µS/cm (Optimum range: 5 to…

  • …Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. The MW302 has a range of 0.0 to 10.0 mS/cm with a 0.1 mS/cm resolution. The meter is supplied complete with Conductivity probe with 1 meter cable and calibration solution.

  • Moveable Sleeve Junction - The PHE-11 pH Electrode/Probe is easy to clean, especially suitable for low ion concentration solutions. The infiltration rate of the electrolyte is determined by the tightness of the sleeve, which can be customized by users to ensure the best performance in every specific…

  • For use with CON 11, CON 400, CON 410, TDS 400, pH/CON 300 and pH/CON 510 meters. Featuring a platinum, built-in temperature sensor Unbreakable epoxy body, with a 3 foot cable K = 0.1 for low conductivity measurements (near or below 20 µS)

  • … Mix samples without a stir platewith direct control for two Orion Star stirrer probes (096019, sold separately) Included electrode arm and newly-designed probe holdermake it easier to maintain andplace probes into samples Works with almost every AC power source with the includeduniversal…

  • The YSI ProDSS ODO/CT probe is the first expansion of the ProDSS system. The ODO/CT probe and cable assembly features integral (i.e. built-in) optical dissolved oxygen, conductivity, and temperature sensors and is available in lengths up to 100 meters. It’s perfect for measuring DO in the…

  • …reading and conductivity results in the range of 0 µS to 199.9 mS, TDS from 0 to 50,000 mg/L TDS salinity. All-in-one 5-pin connector and long lasting, easily changed batteries make operation convenient. Meter comes complete with an illustrated manual. The 4-cell conductivity probe measures…

  • …Nos. 1200Q33 Simultaneous display of pH, conductivity and temperature Automatic or manual calibration Combined pH, conductivity and temperature probe Power on self check routine Auto-selecting ranges for both TDS and conductivity modes The easy to use 430 is designed to readily…

  • …pH/CON probe or separate probe options. Meter with Separate Probes Kit includes Meter, "All-in-One" pH probe 35641-51, conductivity cell (K = 1.0) 35808-50, Grip-Clip holder, calibration solutions, two AA batteries, and hard carrying case Meter with Combination probe Kit includes…

  • Conductivity probe

    Agilent Technologies

  • Redi-Stor™ is the ideal solution for storing conductivity probes. It preserves probe’s cleanliness, eliminates growths found when storing in water only, and maintains the probe for immediate use with no conditioning.

  • …water testing! Durable waterproof and dustproof design with IP67 rating – Even with no probes attached Push-button calibration for all parameters – 5 points for conductivity; 3 points for DO Large backlit graphic display – Multiline display with electrode status…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.