Conductivity Calibration

Compare Tool

Select up to 3 products

Conductivity Calibration
1 - 32 of 172
Sort
View
Show
  • …liquid for frequent calibration needs Highest accuracy available Units labeled (micromhos/millisiemens, ohms, parts per million/TDS) Includes step-by-step calibration instructions and temperature chart 100% compatible with all makes of equipment Calibration standards are…

  • Calibrate your equipment for maximum accuracy Reagent-grade secondary standards Traceable to NIST standards 1,000, 10,000, 50,000 and 100,000 µmhos/cm Each bottle includes detailed instructions and a table of corrections at temperatures between 20 and 30°C. Packaged…

  • Conductivity Calibration Kit Mini-Din

    Thermo Scientific Orion

    …the meter reading to the conductance of the resistor. Note: The conductivity calibration kit verifies proper meter function only. After the meter function is verified, the conductivity cell must be calibrated. Calibrate the cell constant of the conductivity cell according to the meter…

  • Assures high accuracy and stability Plug-in modules Calibration value from 1 mS to 1 S Furnished in plastic storage case Set of seven plug-in units for calibrating conductance meters are characterized for both AC and DC use and are mounted on banana plugs for speed and…

  • NIST traceable materials ±1% accuracy at 25°C All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use. OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients…

  • Test resistors and calibration solutions to test the meters with conductivity function as well as to calibrate the system from the device and conductivity measuring cell Optimal measuring safety by PTB/NIST traceable standard solutions Easy device check by highly precise test resistors …

  • …labeled for calibrating conductivity (micromhos), resistivity (megohms) and dissolved solids (parts per million) of KCl. Vials have an extra-large opening and depth (1 3/4" dia. x 3 1/2" D) which allows calibration to be done in the vial. Standards come with step-by-step calibration

  • Four conductivity standard solutions for calibration include: 10µS/cm, 84µS/cm, 1413µS/cm and 12.88mS/cm.

  • Potassium chloride solutions TDS values are based on a 0.7 conversion from conductivity. Solutions can be used to standardize conductivity meters.

  • …standards are available in a variety of packaging sizes from 1 L bottle down to single-use 20-mL Singlets for on-site analysis. Singlets assure freshness and eliminate the possibility of contamination. All conductivity standards are NIST traceable for optimum conductivity cell calibration.

  • PC300 Benchtop pH/Conductivity Meters

    labForce® (a Thomas Scientific Brand)

    …potential measuring mode. Automatic buffer recognition for 8 kinds of conductivity standards. Uses advanced and original conductivity measurement technology; the conductivity electrode (K=1) can measure between 0.5μS/cm - 200mS/cm by using only one-point calibration. 2-Year Warranty

  • Conductivity Standards

    Mettler Toledo

    Precise Calibration and Verification Across the Whole Conductivity Range All METTLER TOLEDO's conductivity standards are traceable to certified international standard SRM NIST. To guarantee maximum traceability, an individual test certificate exists for every calibration solution. …

  • …LCD digits are easy to read. HOLD button freezes the reading on the display Calibration using solution standards Arrow keys allow fast setting to calibration standards Calibration data is saved even when the unit is turned off Instant-response probe and solid-state…

  • PC200 Portable pH/Conductivity Meters

    labForce® (a Thomas Scientific Brand)

    …between conductivity, TDS, salinity and resistivity measurement mode. Uses advanced and original conductivity measurement technology; the conductivity electrode (K=1) can measure between 0.5μS/cm -200mS/cm by using only one-point calibration. TS-PC201 model includes calibration solutions…

  • Orion™ Conductivity Standards

    Thermo Scientific Orion

    … Traceable to NIST standard reference materials Designed to meet all end user requirements, including laboratory grade and DIN standards Conductivity standard temperature tables are programmed into Thermo Scientific Orion meter software for use with the automatic calibration feature

  • M1000 Benchtop pH/mV/Conductivity/ISE/DO Meters

    labForce® (a Thomas Scientific Brand)

    …can also self-define other ions. With advanced and original conductivity measurement technology, the M1000 model can meet measuring accuracy requirement for range within 0.5μS/cm ~ 200mS/cm by using only one-point calibration. Switch between 4 kinds of concentration unit : pX, mol/L,…

  • …interface. This product is to be used with only the modular version of our Smart Sensors, which include: S8000 Series pH and ORP Sensors CS8000 Series Conductivity Sensors The Calibration Adapter is not measurement specific. One of these can be used to calibrate all modular sensors.

  • …for calibration No containers to clean or carry Pouches are ideal for on-site calibration and verification in the field. Pouches are airtight for maximum freshness and reliability. Each pouch is labeled with equivalent values for ppm in KCl, NaCl, 1000 ppm 442, conductivity values…

  • …Not only does it measure conductivity but also various other parameters such as salinity, resistivity, total dissolved solids and conductivity ash. The instruments are ideally suitable for routine conductivity measurements and special applications alike. Calibrations are possible by manual…

  • …LCD digits are easy to read. HOLD button freezes the reading on the display Calibration using solution standards Arrow keys allow fast setting to calibration standards Calibration data is saved even when the unit is turned off Instant-response probe and solid-state…

  • …Nos. 1200Q33 Simultaneous display of pH, conductivity and temperature Automatic or manual calibration Combined pH, conductivity and temperature probe Power on self check routine Auto-selecting ranges for both TDS and conductivity modes The easy to use 430 is designed to readily…

  • Ergonomic design for routine conductivity applications Robust in design, optimized for one-handed use, and comprising an intuitive menu structure, the Seven2Go portables offer quality conductivity measurement for laboratory, at-line, and outdoor environments. Simple Menu - Intuitive…

  • VERSA STAR Conductivity Module

    Thermo Scientific Orion

    …Conductivity/Temperature module offers: Conductivity, TDS, salinity or resistivity capabilities Selectable reading reference temperatures of 5°, 10°, 15°, 20° or 25°C with linear, non-linear, nLFu or EP curve options for conductivity Choice of practical salinity or…

  • …Ultrameter delivers performance of ±1% of reading. Factory calibrated with NIST traceable solutions, the Ultrameter can be supplied with both certification of traceability and NIST traceable solutions for definitive calibration. A four-digit LCD shows results of up to 9999 mS/ppm, with…

  • …YSI 3100 and 3200 No built-in temperature sensor Precision cells contain platinized platinum-iridium electrodes Accurately calibrated to ±1% of cell constant Connector is spade lug type 3240D35 microcell can be used in test tubes with 5 mL sample Handle…

  • Conductivity Standards are the most accurate available. Accuracy at 25°C is (±0.25 microsiemens for 1, 5, 10 microsiemen solution or ±0.25% for other solutions) or the uncertainty shown on the certificate, whichever is greater. Each bottle is labeled for calibrating conductivity

  • For accurate conductivity analysis of water quality Slip-resistant keypad Quick single-point calibration Measures/compensates temperature in °C or °F Waterproof (IP67) and buoyant Carries the European CE mark Meter features a large, easy-to-read, digital LCD…

  • …printer or PC via DataWay software The 4520 is a high specification laboratory conductivity /resistivity/TDS/salinity and temperature meter that offers additional accuracy with 1, 2 or 3 point conductivity calibration across the wide measurement range of 0 to 19.99S. The dedicated "pure water"…

  • The C66 is a conductivity IP65 waterproof tester, specifically designed for the hydroponics and agricultural markets, with automatic temperature compensation and 1 point manual calibration. The tester has a range of 0.00 to 10.00 mS/cm. The modular design allows easy electrode and battery…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.