Condensing Column

…Hemple Condenser is made from high-quality borosilicate glass and has a 300mm long condensing column. Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have a 300mm long condensing column and…

Jacketed distilling column has indentations on the inner tube to support packing material. The jacket allows the column to be used as a condenser. Column has a top outer and lower inner standard taper joint. All sizes have an I.D. of approximately 10mm.

A Vigreux column is a type of air condenser where the simple tube has been modified to include an abundance of downward-pointing indentations. This dramatically increases the surface area per unit length of the condenser. Includes a 24/40 connector.

Used as distilling head for connecting top of column with condenser. Top 10/30 standard taper joint for 76mm immersion thermometer.

Can be used as a distilling head to connect a condenser to the top of the distillation column. The 10/18 top joint accomadates a 76mm immersion thermometer.

Adapter is vacuum jacketed and can be used as a distilling head to connect a condenser with the top of the distillation column. The 10/30 top outer joint is for use with CG-3506, 75mm immersion thermometers. Inner joints are at a 75º angle to one another and are both the same size. For…

Vigreux Distilling Column, Microscale, Synthware, Joint: 14/10, Overall Length: 122mm, Length Indented Section: 75mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Useful for separating higher boiling liquids that require a short pot-to-column distance to prevent excessive condensation. If pot bleed is desired a two-neck flask can be used. Thermometer joint is 10/18 for 9551, 25mm immersion.

Distillation head with condenser sealed to a Vigreux column. Vacuum adapter has an outer joint and accepts a distribution adapter (D201414). To be used with a 25mm immersion thermometer.

…assortment: Claisen adapter; connecting adapter; thermometer adapter with Neoprene bushing; vacuum distilling adapter; 200 mm West condenser; 200 mm distilling column; 125 mL separatory funnel with Teflon ® stopcock plug; Teflon ® stopper; gas inlet tube; and five round bottom flasks,…

Adapter is used to connect distilling column with vertical condensers. With standard taper outer joint at the top for use with 10/18 or 10/30 jointed thermometers. Both lower inner joints are the same size. Side arm is at a 75º angle to the vertical tube. For thermometers see CG-3506-N.

…design for more efficiency. When a thermometer is inserted in the top of this apparatus, the bulb and stem serve as column packing. The close coupled condenser and vacuum connection offer and extremely short condensate travel path. Used with 25mm immersion thermometer, and D27 distillation receiver.

With Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.

Indentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.

…The vapor bypass is designed to give accurate thermometer readings. Tapered bulb condenser increases capacity without choking. Side arm joint is 28/11.Thermometer joint is 10/30 with 76 mm immersion. Stopcock bore is 4mm. Supplied with 29/42 column joint. Uses ACE 6588 coil, not included.

Indentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.

Large, reflux splitter installed between the boil-up pot or column and the condenser. A 0-20mm PTFE stopcock valve allows take-off when closed and reflux return when open. The take-off terminus is a 35/25 o-ring ball joint. The overall height is 350mm. 45/50 top and bottom joints. All o-rings are…

…Distillation column is 250mm long, vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert atmosphere. Stopcocks are 2mm bore PTFE. Joint on lower drain arm is 14/20, all others 24/40. Complete unit consists of adapter, condenser, storage…

The PYREX® distilling condenser has 19/22 Standard Taper inner and outer joints, is simple in design and easy to use. Side tubulations are 10mm O.D. Distilling condensers are widely used in the lab, especially for fractionation. This condenser is also a replacement for organic chemistry kit No.…

Adapter with #15Ace-Thred top and 14mm OD offset bottom tube with O-Ring grove. Used on small pressure reaction vessels and heads to allow for more space for columns, condensers and addition funnels.

For connecting distilling column with vertical condensers. Top joint 10/30 is for 76 mm immersion thermometer. Side arm at 75 degree , vertical side arm 17.8cm from center tube.

Distillation head with condenser sealed to a Vigreux column. Top thermometer joint is a 10/18 for use with a 1” immersion thermometer. Vacuum adapter has an outer joint and accepts a CG-1279-11 distribution adapter.

For connecting distilling column with vertical condenser. Top has #7 Ace-Thred for use with 5029 bushing and adjustable length thermo-meter. Side arm at 75 degree, vertical side arm 17.8cm from center tube. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.

Placed above a boiling flask to prevent foaming-type reactions from entering either the distilling column or the condenser. Useful with rotary evaporators 517000 features a more extensive baffle system than other traps Manufactured from 33 expansion, low extractable borosilicate glass…

…analytical column lifetime by preventing degradation from harsh "steam-cleaning" water injections Maximum temperature: 325°C When transfer lines from purge-and-trap systems, air monitoring equipment, or other instruments carry condensed water vapor, deactivated column tubing…

…temperature: 325°C When transfer lines from purge-and-trap systems, air monitoring equipment, or other instruments carry condensed water vapor, deactivated column tubing quickly becomes active because of the creation of free silanol groups. These silanol groups adsorb active oxygenated…

…8847T36 clamp is similar to 8847T32 but for columns, large tubes, etc.; opens to 1 3/4”; clamp mounts into either closed connector, open-sided connector or “T” connector. 8847T38 clamp is similar to 8847T32, but for condensers, large columns, tubes, etc.; jaws open to 3 3/8”…

Microscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…

This set is made from high-quality borosilicate glass and all joints are ground 19/22. Set Includes: 1 West condenser 1 Distilling Column 1 Round-bottom flask, 500ml 1 Round-bottom flask, 250ml 1 Round-bottom flask, 100ml 1 Round-bottom flask, 50ml 1 Round-bottom flask, 25ml …

A small, low holdup automatic head which can be completely disassembled for easy cleaning or replacement of parts. Lower column joint and side arm for condenser are 24/40. Joint on takeoff arm is 28/11. The plunger guide is 19/38 and the 10/30 thermometer joint may be used with our 8314 product…

Application: Mixed bed ion exchange resin specially processed resin for condensate polishing; best for in-process and column demineralization. Features and Benefits: Uniform size beads offer higher surface area for increased capacity and faster kinetics. Nuclear grade, gel form,…

… Fourteen components are supplied: Bleed Adapter, Claisen Adapter, Connecting Adapter, Outlet Adapter, Vacuum Adapter Condenser, West, Distillation Column, 25 mL Flask, 50 mL Flask, 100 mL Flask, 250 mL Flask, 500 mL Flask, 125 mL PTFE Funnel, 125 mL, and a 14/20 Glass Pennyhead Stopper…