Column Heater

Compare Tool

Select up to 3 products

Column Heater
1 - 26 of 26
Sort
View
Show
  • Column holder can be placed in any orientation This unique design completely encloses any LC analytical column up to 25 cm in length. Two lengths of heater jackets are available: the short column holder accommodates columns up to 10 cm in length, while the long column holder holds columns up…

  • Thermo Scientific™ HOT POCKET Column Heaters, Eluent Preheater/Precooler and COOL POCKET Chiller offer column heating or cooling in a compact, efficient design. Easy to install and use with a variety of column lengths up to 300mm (up to 150mm for short HOT POCKET model) Dual display…

  • Operation range: 5–55°C, ±0.2°C Ability to program multiple temperature points Accommodates columns up to 30 cm in length and 7.8 mm ID Compact design The Sidewinder heater/cooler unit has a doubly insulated cover to maintain the programmed temperature to within…

  • columns (30 cm x 1") Digitally controllable to 0.1°C PID temperature control Convection chilling and heating for even chamber temperature Temperature range from 4 to 70°C RS232 port for programming ramp and soak cycles, remote control and data collection Column

  • Includes complete injector assembly with heater and sensor, 0-100 mL flow controller, and column head pressure gauge for installation into the AutoSystem.

  • Includes complete injector assembly with heater and sensor, 0-100 mL flow controller and column head pressure gauge, and transducer for screen readout of column carrier flow.

  • The kit includes complete injector, heater, sensor, and heater block. (Does not include pneumatics.)

  • The kit includes complete injector assembly with programmable pneumatic control, heater, sensor, and heater block. The AutoSystem XL must be PPC ready. If not, PPC upgrade kit (N6120146) is required.

  • …The column does not have to be heated to 65°C and operates well at room temperature, so a column heater is not necessary for this method. PRP-X400 columns do not require the use of methanol in the mobile phase, and they cost much less than other glyphosate columns. Pack Your Own Columns -…

  • For dry block heaters Machined and fabricated from solid aluminum Anodized to resist oxidation Rows and columns are labeled on appropriate blocks for easy vessel identification Each block module measures 3" x 3 3/4 " x 2". See Thomas numbers 5152M65 to M75 for additional…

  • … Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing agents and steam sterilization for biological applications Variety of sizes…

  • Kit includes all necessary items to install the TCD into theinstrument: detector, heater, sensor, heater block, 1/6 in. gasline, and flow controller pneumatics. How it Works: Balanced carrier flow is maintained through the analytical andreference channels. The filaments are electrically heated…

  • Kit includes all necessary items to install the TCD into the instrument: detector, heater sensor, heater block, 1/16in. gas line and flow controller pneumatics. Requires but does not include amplifier, P/N N6120015. The TCD can only be installed the rear detector position. The AutoSystem TCD is a…

  • HT9 Glass Fiber Heating Tapes

    Electrothermal (Cole-Parmer)

    HT9 Glass Fibre Tapes are flexible heaters that are ideal for heating columns, pipes, valves and transfer lines, especially when these applications need to be observed. They can be applied to metal pipes as well as glassware. The HT9 Series Glass Fibre Tapes have an element wound on a glass fibre…

  • …all-glass system is required and glass packed columns will be used, then a glass-lined tail pipe should be ordered (N6100264). As a reminder, use of packed 1/4 in. columns requires a 1/8 in. to 1/4 in. adapter. Kit includes detector, heater, sensor, heater block, programmable pneumatic control for…

  • …required and glass packed columns will be used, then a glass-lined tail pipe should be ordered (N6100264). As a reminder, use of packed 1/4 in. columns requires a 1/8 in. to 1/4 in. adapter. FPD Add-on Kit for AutoSystem Series includes detector, heater, sensor, heater block, hydrogen needle valve,…

  • …required and glass packed columns will be used, then aglass-lined tail pipe should be ordered (N6100264). As a reminder, use of packed 1/4 in. columns requires a 1/8 in. to 1/4 in.adapter.FPD Add-on Kit for AutoSystem Series includes detector, heater, sensor, heater block, hydrogen needle valve,…

  • …detector of choice for low level drug and pesticide applications because of its sensitivity and selectivity. Kit includes detector, heater, sensor, heater block, and programmable pneumatic control for detector combustion gases with two beads. Requires but does not include amplifier (P/N…

  • …detector of choice for low level drug and pesticide applications because of its sensitivity and selectivity. Kit includes detector, heater, sensor, heater block, and programmable pneumatic control for detector combustion gases with two beads. Requires but does not include amplifier (P/N…

  • …the detector of choice for low level drug and pesticide applications because of its sensitivity and selectivity. Kit includes detector, heater, sensor, heater block, air needle valve, and hydrogen pressure regulator with snubber and two beads. Requires but does not include amplifier. AutoSystem…

  • …the detector of choice for low level drug and pesticide applications because of its sensitivity and selectivity. Kit includes detector, heater, sensor, heater block, air needle valve, and hydrogen pressure regulator with snubber and two beads. Requires but does not include amplifier. AutoSystem…

  • …is accomplished by chimney convection from a 275W heater in base, promoted by peripherally slotted conical bottom and permanent gap between spring-loaded swivel cover and drying chamber. Chamber, 483 mm high x 140 mm i.d., takes burets, columns and other tubular glassware up to 375 mm long, in same…

  • …components eluting from the column in order to generate the chromatographic signal. The PID has a maximum recommended operating temperature of 250 °C. The lamp can be replaced with a blanking disk to allow bake-out operation (up to 350 °C). Kit includes detector, heater, sensor, makeup gas needle…

  • …components eluting from the column in order to generate the chromatographic signal. The PID has a maximum recommended operating temperature of 250 °C. The lamp can be replaced with a blanking disk to allow bake-out operation (up to 350 °C).PID Add-on Kit includes detector, heater, sensor, makeup gas…

  • …components eluting from the column in order to generate the chromatographic signal. The PID has a maximum recommended operating temperature of 250 °C. The lamp can be replaced with a blanking disk to allow bake-out operation (up to 350 °C). Kit includes detector, heater, sensor, makeup gas needle…

  • …provide powerful cooling with tap water - up to 15 kW of cooling power at temperatures >200 °C. Typical applications: reactors, autoclaves, distillation columns, miniplant installations, pilot plants and production facilities. Caution: Use only with JULABO Thermal H350 bath fluid.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.