Class A Volumetric Flask

Compare Tool

Select up to 3 products

Class A Volumetric Flask
1 - 32 of 134
Sort
View
Show
  • Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions

  • …applications. Polymethylpentene (PMP) and polypropylene (PP) volumetric flasks offer a break-resistant alternative to glass. Class B per DIN EN ISO 1042. Supplied with matching PP standard taper joint stoppers. Flasks’ 10 mL size allows for accurate measurement of smaller volumes. …

  • Class A Volumetric Flasks

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They are supplied with a standard taper penny head glass stopper. Calibrated "to contain" at 20°C. Reference: ASTM E288 and Federal Specifications NNN-F-289. …

  • KIMAX Brand Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …Type 1, Class A “unserialized” flasks of Federal Specification NNN-F-289 and for precision grade flasks of ASTM specification E 288. Capacity/stopper size given in listings. Standard Taper ground mouth fitted with polyethylene stopper (4997N30 to N82) 2 mL flasks are not Class A

  • Micro Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …to the following tolerances: 1 mL: ±0.01 mL; 2 mL: ±0.015 mL; 5 and 10 mL: ±0.02 mL; 25 mL: ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper For micro-chemical work, sizes 1 through 5 mL are designed in accordance with the…

  • Micro Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …1 mL: ±0.01 mL; 2 mL: ±0.015 mL; 5 and 10 mL: ±0.02 mL; 25 mL: ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper For micro-chemical work, sizes 1 through 5 mL are designed in accordance with…

  • …is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.

  • Borosil® Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard PP stoppers. Flasks comply with ASTM E-288-Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL options have a trapezoidal shape…

  • Class A Amber Volumetric Flasks

    United Scientific Supplies

    Amber stained volumetric flasks are manufactured per ASTM E-288 Class A Serialized glassware specifications. Calibrated to contain (TC), these flasks feature white enamel printing and diamond etched graduation line. Our flasks feature heavy-duty and uniform wall thickness and a wide mouth design for…

  • With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C

  • …is easy with wide mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • Class A Volumetric Flasks, Unstoppered

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They feature a heavy neck to accept Standard Taper glass stoppers (not included). Calibrated "to contain" (TC) at 20°C. Reference: ASTM E288 and Federal…

  • …is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • …access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • Borosil® Amber Light Blocking Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL…

  • Borosil® Wide Mouth Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL options have…

  • Calibrated "to contain" (TC) at 20°C, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…

  • Class A Volumetric Flasks with Plastic Stopper

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flasks are provided with a plastic closed-bottom stopper which fits the Standard Taper ground zone. Stopper design prevents the neck from breaking if flask is tipped over. Calibrated "to contain" (TC) at 20°C.

  • KIMAX® flask calibrated to contain Class A accuracy but without a serial number Supplied with a polyethylene snap cap Replacement cap is 28150R Designed from ASTM Specification E288 requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP…

  • Volumetric flasks for microchemical work, sizes 1 through 5mL, are designed in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. Solid Standard Taper glass stopper and hexagonal base Calibrated to contain at 20°C, in…

  • …with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances …

  • KIMAX Square, Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    Calibrated to contain Designed from Federal Specification NNN-F-289, Type I, Class A and ASTM Standard E 288 Square body, which permits closer packing on shelves 25 to 35% less area than conventional flasks of similar capacities With marking spot and solid stopper

  • Similar to 4997B13 series, but with protective PVC coating Coating promotes longer product life and greater safety and helps contain glass and contents should breakage occur Autoclavable and microwaveable to 121°C (250°F) Resistant to thermal shock With PYREX Standard Taper…

  • The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…

  • Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.

  • Class A Kohlrausch Volumetric Flasks

    Wilmad-LabGlass - SP Scienceware

    Calibrated "to contain" at 20°C, the upper neck of these borosilicate glass flasks are enlarged to permit easy introduction of solids. Each flask is provided with a marking spot in addition to a serial number. NOTE: Supplied with Certificate of Compliance

  • …make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped.  These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.

  • …is sharp and permanent. Large white block letters make the inscription easy to read. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.

  • Volumetric Flasks, Class A, Kohlrausch

    DWK Life Sciences (Kimble)

    Capacity: 500mL Tolerance: ±0.20mL Rubber Stopper Size: 9 Approx. Height: 264mm

  • Borosil® Amber Wide Mouth Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL, 500mL, 1L options is not covered in ASTM. 5mL, 10mL, and…

  • NIST Traceable Barrel-shaped glass stopper Meets ASTM Standard E 694 and E 288 Designed from Federal Specification NNN-F-289, Type 1, Class A Serial number, marking spot and stopper

  • These PYREX® standard volumetric flasks conform to Class A capacity tolerances prescribed by ASTM. However, to facilitate transfer of crystals, salts and powders, the open end has been expanded on the 25mL and 50mL sizes. The standard 18-410 G.P.I. thread screw caps have a durable cone-shaped…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.