Class A Volumetric Flask

Compare Tool

Select up to 3 products

Class A Volumetric Flask
1 - 32 of 131
Sort
View
Show
  • Class A Volumetric Flasks

    BrandTech®

    …applications. Polymethylpentene (PMP) and polypropylene (PP) volumetric flasks offer a break-resistant alternative to glass. Class B per DIN EN ISO 1042. Supplied with matching PP standard taper joint stoppers. Flasks’ 10 mL size allows for accurate measurement of smaller volumes. …

  • PYREX Brand Class A Volumetric Flasks

    Corning

    Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions

  • Class A Volumetric Flasks

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They are supplied with a standard taper penny head glass stopper. Calibrated "to contain" at 20°C. Reference: ASTM E288 and Federal Specifications NNN-F-289. …

  • KIMAX Brand Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …Type 1, Class A “unserialized” flasks of Federal Specification NNN-F-289 and for precision grade flasks of ASTM specification E 288. Capacity/stopper size given in listings. Standard Taper ground mouth fitted with polyethylene stopper (4997N30 to N82) 2 mL flasks are not Class A

  • PYREX® Class A Volumetric Flasks

    Corning

    …is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.

  • Borosil® Class A Volumetric Flasks

    Borosil

    Borosil® Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard PP stoppers. Flasks comply with ASTM E-288-Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL options have a trapezoidal shape…

  • Micro Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …to the following tolerances: 1 mL: ±0.01 mL; 2 mL: ±0.015 mL; 5 and 10 mL: ±0.02 mL; 25 mL: ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper For micro-chemical work, sizes 1 through 5 mL are designed in accordance with the…

  • PYREX Brand Class A Volumetric Flasks

    Corning

    With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C

  • Micro Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …1 mL: ±0.01 mL; 2 mL: ±0.015 mL; 5 and 10 mL: ±0.02 mL; 25 mL: ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper For micro-chemical work, sizes 1 through 5 mL are designed in accordance with the…

  • Class A Volumetric Flasks, Unstoppered

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They feature a heavy neck to accept Standard Taper glass stoppers (not included). Calibrated "to contain" (TC) at 20°C. Reference: ASTM E288 and Federal…

  • Borosil® Amber Class A Volumetric Flasks

    Borosil

    Borosil® Amber Light Blocking Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL…

  • Borosil® Wide Mouth Class A Volumetric Flasks

    Borosil

    Borosil® Wide Mouth Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL options have…

  • Class A Volumetric Flasks with Plastic Stopper

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flasks are provided with a plastic closed-bottom stopper which fits the Standard Taper ground zone. Stopper design prevents the neck from breaking if flask is tipped over. Calibrated "to contain" (TC) at 20°C.

  • PYREX® Micro Class A Volumetric Flasks

    Corning

    Volumetric flasks for microchemical work, sizes 1 through 5mL, are designed in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. Solid Standard Taper glass stopper and hexagonal base Calibrated to contain at 20°C, in…

  • KIMAX Square, Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    Calibrated to contain Designed from Federal Specification NNN-F-289, Type I, Class A and ASTM Standard E 288 Square body, which permits closer packing on shelves 25 to 35% less area than conventional flasks of similar capacities With marking spot and solid stopper

  • PYREXPLUS® PVC-Coated Class A Volumetric Flasks

    Corning

    Similar to 4997B13 series, but with protective PVC coating Coating promotes longer product life and greater safety and helps contain glass and contents should breakage occur Autoclavable and microwaveable to 121°C (250°F) Resistant to thermal shock With PYREX Standard Taper…

  • Class A Amber Volumetric Flasks

    United Scientific Supplies

    Amber stained volumetric flasks are manufactured per ASTM E-288 Class A Serialized glassware specifications. Calibrated to contain (TC), these flasks feature white enamel printing and diamond etched graduation line. Our flasks feature heavy-duty and uniform wall thickness and a wide mouth design for…

  • Class A Kohlrausch Volumetric Flasks

    Wilmad-LabGlass - SP Scienceware

    Calibrated "to contain" at 20°C, the upper neck of these borosilicate glass flasks are enlarged to permit easy introduction of solids. Each flask is provided with a marking spot in addition to a serial number. NOTE: Supplied with Certificate of Compliance

  • PYREX® Class A Volumetric Flasks with PTFE Stopper

    Corning

    …is sharp and permanent. Large white block letters make the inscription easy to read. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.

  • Borosil® Amber Light-Blocking Wide Mouth Class A Volumetric Flasks

    Borosil

    Borosil® Amber Wide Mouth Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL, 500mL, 1L options is not covered in ASTM. 5mL, 10mL, and…

  • PYREX® Class A Volumetric Flasks with Screw Cap

    Corning

    These PYREX® standard volumetric flasks conform to Class A capacity tolerances prescribed by ASTM. However, to facilitate transfer of crystals, salts and powders, the open end has been expanded on the 25mL and 50mL sizes. The standard 18-410 G.P.I. thread screw caps have a durable cone-shaped…

  • Class A Volumetric Flasks with Snap Cap, Batch Certified, QR-Coded

    United Scientific Supplies

    Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included. Meets Class A specifications per ASTM E-288. Batch Certified. Our volumetric flasks feature QR code integration to facilitate quick and easy…

  • Class A Volumetric Flasks with Glass Stopper, Batch Certified, QR-Coded

    United Scientific Supplies

    Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included. Meets Class A specifications per ASTM E-288. Batch Certified. Our volumetric flasks feature QR code integration to facilitate quick and…

  • KIMAX® Heavy-Duty Wide Mouth Class A Volumetric Flasks with Glass Stoppers

    DWK Life Sciences (Kimble)

    …is easy with wide mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • KIMAX® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with PTFE Stoppers

    DWK Life Sciences (Kimble)

    …is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • KIMAX® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with PE Stoppers

    DWK Life Sciences (Kimble)

    …access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • Light-Shielding Class A Volumetric Flasks With Screw Cap - PMP

    BrandTech®

    volumetric flasks of polymethylpentene (PMP) offer superior opacity to ultraviolet light, as well as much of the visible spectrum, compared with amber glass. They are also light weight and offer superior break resistance. An excellent choice for measurement of light-sensitive materials. Flasks

  • KIMAX® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with No Stoppers

    DWK Life Sciences (Kimble)

    …is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • Class A Volumetric Flasks, Heavy Duty, Wide Mouth, PTFE Stopper

    Wilmad-LabGlass - SP Scienceware

    Calibrated "to contain" (TC) at 20°C, this Class A, borosilicate glass, wide mouth flask is designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…

  • Class A Volumetric Flasks, Heavy Duty, Wide Mouth, Glass Stopper

    Wilmad-LabGlass - SP Scienceware

    Calibrated "to contain" (TC) at 20°C, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…

  • Class A Square Volumetric Flask Calibrated

    DWK Life Sciences (Kimble)

    …and marking spot are blasted onto glass. ground glass stopper is supplied with the flask. Designed from ASTM Specification E288, Class A unserialized requirements. Replacement ground glass stopper is 41900R. Save Valuable Shelf Space Each Square Flask Takes Up 25-30% Less Space than a Round Flask

  • Class A Volumetric Serialized Flasks with Stopper

    Wilmad-LabGlass - SP Scienceware

    Glass quality, calibration lines, inscription and appearance are maintained according to the former NBS circular 602. Flask has a marking spot in addition to a serial number. Calibrated to contain (TC) at 20°C. Supplied with stopper.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.