Clamp Holder

Compare Tool

Select up to 3 products

Clamp Holder
1 - 32 of 126
Sort
View
Show
  • Clamp Holders

    United Scientific Supplies

    Clamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.

  • Swivel Clamp Holder

    Humboldt

    For attaching extension clamps to supports Aluminum construction Has swivel for rods up to 5/8” diameter

  • Adjustable Clamp Holder

    GSC International, Inc.

    The clamp can be rotated 360 degrees and locked in place. Cast iron with nickel plated thumb screws.

  • Right Angle Clamp Holder

    GSC International, Inc.

    Cast iron construction with nickel plated thumb screws. Will accept rods up to 5/8" in diameter.

  • LabJaws Clamp, Small Clamp Holder

    Troemner

  • Clamp Holder, Pilot Plant

    Ace Glass

    Used with 11065 versatile jaw type clamp to secure condenser, etc., on 6472 Pilot Plant Reactor. Holder clamps to 1 bar on frame of Reactor; 11065 Clamp is held in clamp holder with thumb screw. Fabricated of aluminum, painted black. For clamp, see 11065-04. New add-on 1/2" hole for vertical…

  • Clamp Holders for Extension Rings

    Humboldt

  • Universal Clamp with Holder

    United Scientific Supplies

    Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

  • Scienceware® Stainless Steel Clamping Thermometer Holder

    Bel-Art - SP Scienceware

    With five hole sizes ranging from 3.5mm to 14.5mm, this holder accommodates various thermometers including liquid in glass, electronic with probe, and bimetal with probe. The stainless steel, spring loaded clip attaches securely to laboratory containers, shelves up to 3/8” thick, and more.…

  • Vacuum-Type Glass Membrane Holders

    GE Healthcare

    For general purpose vacuum filtration Borosilicate glass funnel body and stem are attached securely by quick-action spring clamp of anodized aluminum Easily disassembled for loading, cleaning and autoclaving Include single-hole silicone rubber stopper

  • LabJaws Q-Clamp Post Holder

    Troemner

  • Racks, Clamps and Holders for the 2000 Geno/Grinder

    SPEX SamplePrep

    …Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve standard 50 mL centrifuge tubes (115 mm length) with 2196 Holder, or twenty-four standard 15 mL centrifuge tubes (119 mm length) with 2197 Holder. Clamp also holds…

  • Labjaws Thermometer Extension Clamp

    Ohaus

    Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

  • Clamp and Support Rods

    Humboldt

    Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).

  • Labjaws Support Clamp

    Ohaus

    Twin vinyl coated prongs support tubing and any other apparatus. Integral post holder for easy positioning accepts up to 2.1 cm diameter rod. 10 cm length.

  • Labjaws Thermometer Swivel Clamp

    Ohaus

    Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

  • Square Section Work Holder

    Harvard Apparatus

    …and rod clamp for securing rectangular objects to support rod Alternately, can be used to support a rod vertically on water bath wall or in-line with top Takes objects up to 3/4” (19 mm) thick and has thumbscrew with cushioned tip to prevent damage to object. Rod clamp socket…

  • PFA In-Line Filter Holder

    Cole-Parmer

    …filter holder is suitable for organic solvents, acids, alkalies, or high-purity filtration. Temperature range is –320 to 500°>F (–196 to 260°>C). Withstands up to 65 psi. Change filter without disconnecting tubing with Tefzel® ETFE clamp nut. Prefiltering…

  • 25mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …Steel support Borosilicate glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and base.…

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …assembly for sterility testing of antibiotics and pharmaceuticals. Silicone cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone…

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet concentrates the sample into a 13mm diameter 1.2cm 2 area. The anodized aluminum clamp secures the membrane…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    … Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel…

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …particulate contamination under vacuum. The 90mm holder offers an increased filtration area making it ideal for viscous samples and liquids with a heavy particle load or bioburden that would tend to clog a 47mm diameter filter. The anodized aluminum clamp secures the membrane between the funnel and…

  • Ultra Flex Support System With Bench Clamp

    Ohaus

    …Flex clamping system is extremely versatile and features a flexible arm that can be placed in virtually any position or angle. System includes 2-prong clamp head, 3-prong clamp head, spring clamp head, flex arm in 12” (30.5 cm) or 18” (45.7 cm) length, aluminum bench clamp and utility…

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

  • Vacuum Filter Holder Set, 90mm

    United Scientific Supplies

    This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

  • Fixed-Position Clamps

    Ohaus

    Used to hold apparatus near the lab-frame where no adjustment is required after set-up. Built-in holder grips rods up to 19mm (0.75") in diameter Fixed-Position Clamps have an integral holder but can be rotated after attachment to a lab-frame or other apparatus. Available in 2-prong or 3-prong.…

  • Labjaws Water Bath Clamps

    Ohaus

    Suspends 6 to 13 mm thermometers over water bath. C clamp holder fits bath walls up to 9 mm thick. Overall length is 64 mm.

  • Swivel Clamps

    Ohaus

    …extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft wing-nut allows the holding angle of the swivel clamp

  • Microanalysis Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …seal in this holder and it is not autoclavable with membrane filters installed. Unlaminated PTFE or PVDF membranes are recommended for solvent applications. Complete set includes a borosilicate glass funnel and base, fritted glass filter support, anodized aluminum spring clamp, and silicone…

  • Microanalysis Vacuum Filter Holder Set, Stainless

    United Scientific Supplies

    …this holder and it is not autoclavable with membrane filters installed. Unlaminated PTFE or PVDF membranes are recommended for solvent applications. Complete set includes a borosilicate glass funnel and base, removeable stainless steel screen filter support, anodized aluminum spring clamp, and…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …of suspended solids in water using 47mm depth filters. Complete set includes a borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.