Clamp 18

Compare Tool

Select up to 3 products

Clamp 18
1 - 32 of 162
Sort
View
Show
  • Pendulum Clamp

    Humboldt

    This unit clamps to any horizontal or vertical support rod up to 3/4" (19mm) in diameter. The clamp is designed to hold three pendulums spaced 2-1/8" (54mm) apart with points for suspending cords on the same horizontal line, each individually adjustable. The overall length is 10-1/2" (267mm) by 3/4"…

  • Dovetail Clamp

    Humboldt

    This clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16"-18 by 1-1/4" steel thumbscrew. The clamp is 1-3/16" wide by 2-15/16" (30mm x 59mm) long and measures 1-3/8" (35mm) from muff center to the dovetail.

  • Hook Clamp

    Humboldt

    The Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).

  • Labjaws Thermometer Extension Clamp

    Ohaus

    Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

  • Volumetric SUREGRIP™ Clamp

    Burrell

    The Volumetric SUREGRIP™ Clamp was created specifically for volumetric flasks. This contains a botttom support, which was designed to help stabilize the flask and prevent the flask neck from breaking. The clamp holds up to 500ml flasks.

  • Drawer/Ganizer® Clamp / Instrument Tray

    Spectrum Med

    Organizer Tray, Clamps & Instruments, Portable, Drawer/Ganizer, Large (49x44x7cm) w/ 7 compartments in 3 sizes, 1/8” heavyduty polystyrene, transport & storage of various bulky lab items, secondary containment for liquid safety

  • Ultra Flex Support System With Bench Clamp

    Ohaus

    …Flex clamping system is extremely versatile and features a flexible arm that can be placed in virtually any position or angle. System includes 2-prong clamp head, 3-prong clamp head, spring clamp head, flex arm in 12” (30.5 cm) or 18” (45.7 cm) length, aluminum bench clamp and utility…

  • 3000A True RMS AC Flexible Clamp Meter

    Extech

    …flexible clamp with LCD monitor. The True RMS measurements are for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with two AAA batteries. UL listed and CAT IV 600V safety rating. The MA3018 is a 3000A True RMS AC Flex Clamp Meter. The MA3018 features an 18 inch…

  • Dumont Medical Tweezers, Clamp Style L7

    Electron Microscopy Sciences

    Curved, fine points with clamp ring. Length: 115 mm. Inox 08 Inox 08 is a medical stainless steel composed of C, Mn, Cr, Mo and V that provides an excellent resistance to corrosion and a good resistance to salt. Although not as hard as Carbon steels, Inox 08 offers excellent resistance…

  • FLIR CM55 & CM57 Flexible Clamp Meters

    FLIR

    …Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM55 and CM57 let you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter.…

  • Dumont Medical Tweezers, Clamp Style L4

    Electron Microscopy Sciences

    …are made from stainless steel. They are anti-magnetic and come with a clamping ring, which slides easily into a locking or release position. The tweezers have serrated handles. Style L4: Extra thin tips, with clamping ring. Length: 110mm Inox 08 is a medical stainless steel composed…

  • Dumont Medical Tweezers, Clamp Style L5A

    Electron Microscopy Sciences

    …are made from stainless steel. They are anti-magnetic and come with a clamping ring, which slides easily into a locking or release position. The tweezers have serrated handles. Style L5A: Oblique tips, with clamping ring. Length: 115mm Inox 08 is a medical stainless steel composed…

  • Dumont Medical Tweezers, Clamp Style L5

    Electron Microscopy Sciences

    …are made from stainless steel. They are anti-magnetic and come with a clamping ring, which slides easily into a locking or release position. The tweezers have serrated handles. Style L5: Super thin tips, with clamping ring. Length: 110mm Inox 08 is a medical stainless steel composed…

  • Chain Clamps

    Ohaus

    …secure slip-on chain connection with large, easy-to-turn adjusting knob. Extension arm allows user to vary distance from the frame. Available as stainless steel clamp constructed entirely of stainless steel with electro-polished finish or nickel-plated zinc clamp with strong, chromed-brass chain.

  • Carboy Clamp and Silicone Stopper Assemblies for Solution Bottles

    DWK Life Sciences (Kimble)

    … KYNAR® Clamp. Kimble has developed a 3-port platinum cured stopper assembly and sanitary KYNAR® clamp to provide sterile fluid transfer with no extractables as required in bio-tech and pharmaceutical applications. The stopper ports are designed to connect to 1/8", ¼" (4-port…

  • Stainless Steel Ball & Socket Clamps

    Bal Supply

    Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

  • Polypropylene Shaker Flask Clamps

    TriForest

    …polypropylene shaker clamps are carefully engineered to provide both clipping elasticity and motion resistance in one product. Featuring a non-scratch design, our shaker clamps come in standard blue color accompanied by stainless steel screws and washers. Our clamps fit all industry standard…

  • Thomas Spherical Joint Pinch Clamps

    Thomas®

    …the spiral spring. Size number indicates the diameter in millimeters of the ball over which the clamp fits, and corresponds to numerator of Spherical Joint for which clamp is intended. Clamp 18 for instance, fits both Spherical Joint 18/7 and 18/9 joints. NOTE: Image might not represent…

  • Corning® 18 x 5/16" Stainless Steel Support Rod

    Corning

    Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.

  • Screw Compressor Clamp, Closed-Jaw C-Clamp

    Humboldt

    Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

  • Screw Compressor Clamp, Standard Open-Jaw C-Clamp

    Humboldt

    Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

  • 3000A AC Flex Clamp-on Adaptor

    Extech

    …built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating. The CA3018 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3018 is an 18 inch flexible clamp capable…

  • Clamp, Two-Piece, Flat Flange

    Ace Glass

    Two-piece unfinished aluminum clamp with PTFE gaskets and brass tightening bolts. Code -03 fits our 7646-18 75mm o-ring joint and our 7519 (76mm) filter support assembly. Code -05 fits our 7519 (102mm) filter support assembly and our 6504 kettles with

  • Ultra Flex Support System With Lab Frame Connector

    Ohaus

    …in diameter.  Ultra Flex clamping system is extremely versatile. Flexible arm can be placed in virtually any position or angle. System features 2-prong clamp head, 3-prong clamp head, spring clamp head, nickel-plated flex arm in 12” (30.5 cm) or 18” (45.7 cm) length, cast alloy…

  • Lattice Lab System, Set #3

    United Scientific Supplies

    …Plate, 2-5/16 diamter (6), Set Screw for foot plate (6), Anchoring Screw for foot plate (18), Hook Connector with Thumbscrew (42), Support rod 2" long, 1/2" diameter (10), Support Rod 18" long, 1/2" diameter (3),  Support Rod 36" long 1/2" diameter (2), Support…

  • Lattice Lab System, Set #2

    United Scientific Supplies

    This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

  • Ultra Flex Support System With Base Plate

    Ohaus

    …arm 3 types of clamp heads Support system is designed with a stable base plate that fits easily on bench tops or in fume hoods. The system includes three interchangeable clamp heads that make it very versatile: 2-prong clamp head, 3-prong clamp head and spring clamp head. The system also…

  • Sublimation Apparatus, Vacuum

    Ace Glass

    A 50mm size for samples of approximately 25mL With a #50 O-Ring joint, unit measures 200 mm high x 50 mm diameter. The stopcock is positioned so that the bottom can be firmly clamped. Use clamp No. 7670-18. Order clamps separately. For Replacement O-Ring, see 7855-748.

  • Universal U-Shaped Support Base And Rod

    Eberbach

    Eberbach Labtools 7560 Universal Support, Order No. 7560 - 3/4" dia x 34" L 2 section nickel-plated steel support is mounted in iron base Base has 5 threaded holes for convenient rod placement Breaks down into compact unit Package size 18-1/2" x 4" x 2" …

  • Utility Box fits 6000, 6155, 6010

    Eberbach

    …test tube supports Slots in the four sides accommodate both cross-wise and length-wise bar clamps Aluminum box measures 18 x 12 x 4 inches high, with rubber-covered floor. Rubber-covered clamps may be secured anywhere in the slots by wing nuts. Utility of box can be increased by the…

  • Joints, O-Ring Seal

    Ace Glass

    …O-Ring and provide greaseless, vacuum tight connection. All joints are held together with our 7669 family of pinch clamps, except for code -18 for which we use our 6509-03 two-piece clamp. O-rings are Fetfe and may be used up to 230 degrees C. Each joint is supplied with one o-ring. For replacement…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.