Chromatography Tank

Compare Tool

Select up to 3 products

Chromatography Tank
1 - 11 of 11
Sort
View
Show

Alfa Aesar

  • Vaccuum Manifolds And Accessories

    Agilent Technologies

    …individual cartridges are suitable for use from method development to lower volume production. Manifolds available for either 10 or 20 positions Tank constructed of chemically resistant, vacuum-safe glass Ultra high molecular weight polyethylene lid ensures excellent solvent resistance Vacuum…

  • 10 cm Developing Tank

    General Glass Blowing

    Flat ground top is beveled on the inner and outer rim Ground flat bottom for stability Holds two 10 x 10 cm plates or four 5 x 10 cm plates Thin-Line units allow for faster and more uniform solvent saturated atmosphere and therefore require less solvent. Inside dimensions: 12 x 6.4…

  • Latch-Lid Chromatotank Unit

    General Glass Blowing

    …inspection of contents Tank is ground flat to match ground glass lid. Beveled inside and outside to remove any sharp edges. Holds two 20 x 20 cm plates or four 10 x 20 cm plates. Latching device holds the matching ground glass surfaces of the lid and tank firmly in place. Metal components…

  • Rectangular Developing Tank

    General Glass Blowing

    Beveled inside and outside to remove any sharp edges Raised ridge midway on the inside ends and bottom for developing two 20 x 20 cm plates or the equivalent Inside dimensions: 27 x 7 x 26 cm Supplied with flat glass lid, 30 x 10 x 3 cm Molded glass block of clear glass with flat…

  • TLC Developing Tank

    Kimble

    Constructed of sturdy molded glass bricks Withstands regular use for many years The tank’s clear sides allow for visual inspection of TLC plates up to 20 x 20 cm size. The top of the tank is ground flat to match the lids and the edges are beveled to remove any sharp edges. The bottoms are…

  • 10 cm Latch-Lid Chromatotank

    General Glass Blowing

    …uniform solvent-saturated atmosphere. Single molded tank has a flat ground top, beveled for safety on the inner and outer rims; bottom has been ground for stability. Unique latching device holds the matching ground glass surfaces of the lid and tank firmly in place. Metal components of the latch lid…

  • TLC Cylindrical Developing Tanks

    Kemtech America

    All glass cylindrical TLC developing chambers that will accommodate 25 x 75mm to 50 x 200mm TLC plates. The compact design offers good plate visability and minimal solvent use. Lid has a short length standard taper joint with a ball style handle.

  • Gas Analyzer Standards And Accessories

    Agilent Technologies

    …specifications: Pressure (when full): 240 psi, Volume: 8.5 liters, Temperature range: 0°F to 450°F, Diameter: 2.75 in., Height (w/valve): 7.25 in., Tank material: Carbon steel, Concentrations: ±5% accuracy, w/w. Combo Boxes (2714T93 and T94) contain one box of 2 calibration mix cylinders,…

  • MXT-502.2 Columns (Siltek-treated stainless steel)

    Restek

    …volatile organic pollutants, cited in U.S. EPA Method 502.2 and in many gasoline range organics (GRO) methods for monitoring underground storage tanks. Excellent separation of trihalomethanes; ideal polarity for light hydrocarbons and aromatics. Temperature range: -20°C to 320°C. …

  • VICI Mat/Sen Gas-Specific Purifier Modules

    Restek

    …when supplied with gas of 99.995% purity, and are pre-purged with the specified gas to speed conditioning. Purifier capacity is approximately four tanks of gas at 99.995% (50 ppm) purity, and correspondingly longer for purer gases. Replace separate oxygen, moisture, and hydrocarbon traps with…

  • Rtx-502.2 Columns (fused silica)

    Restek

    …for volatile organic pollutants. The Rtx-502.2 column is cited in U.S. EPA Method 502.2 and in many gasoline range organics (GRO) methods for monitoring underground storage tanks. Excellent separation of trihalomethanes; ideal polarity for light hydrocarbons and aromatics. Stable to 270°C.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.