Chromatography Column

Compare Tool

Select up to 3 products

Chromatography Column
1 - 32 of 9520
Sort
View
Show

GFS

  • General purpose gravity eluted column having a PTFE stopcock and reinforced beaded top. Column is constructed using MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom.

  • Flex-Column Economy Chromatography Columns

    DWK Life Sciences (Kimble)

    …available with inner diameters of 0.7, 1.0, 1.5 and 2.5 cm and lengths ranging from 4 to 170 cm. Short columns are most frequently used for ion exchange chromatography, sample desalting and semidisposable applications. Long columns are ideally suited for gel filtration and adsorption chromatography.

  • Chromatography Column Holder

    Bel-Art - SP Scienceware

    Securely holds as many as eight chromatography columns up to 30mm (1-3/16") in diameter in or between its flexible loops. Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods Tighten the screws to mount the rack at the desired height …

  • Disposable Chromatography Columns

    Evergreen Scientific

    …desalting. Chromatography columns are precision-molded in 5 ? and 7 ? sizes from premium-grade, chemically inert plastics. Polystyrene columns are glass-clear and appropriate for use with mild acidic (except oxidizing acids) and alkali solutions. Polypropylene columns are contact-transparent,…

  • …purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Top Joint: ST 24/40 Note: since the chromatography column is…

  • Gravity Chromatography Columns

    DWK Life Sciences (Kimble)

    Gravity chromatography column manufactured from medium wall tubing with PTFE stopcock and in-line reservoir for containing liquid buffer Standard Taper joint size 24/40 These columns may be used alone or in combination with 420575-2440 flow control adapter A coarse porosity glass frit…

  • SYNTHWARE short chrmoatography column with a lower standard taper 24/40 inner joint with a sealed in drip tip and a hose connection. Designed to perform seperations using a vacuum source. All sizes have a fritted disc to support column packing.

  • 316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules Preassembled prior to shipment Internal 1/16" seats are compatible with Valco and Parker fittings

  • …diffusion disc from the column Packing Reservoir Funnels The funnels are used for initial column packing and as a small buffer reservoir. Available in two capacities: 100 mL for the 0.7, 1.0 cm and 1.5 cm ID columns and 700 mL for the 2.5 cm columns Manufactured from…

  • Internal threaded bottom drip adapter with or without flow regulator valve. 1/4"-28 or NPT internal threads. Supplied with packing support and o-ring. For use with all Ace-Thred chromatography columns.

  • SYNTHWARE general purpose chromatography column with heavy wall design. With reinforced beaded top. Supplied with a PTFE stopcock. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Note: since the chromatography column is used with positive air…

  • …general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Top Joint: ST 24/40. Column packing is supported by glass wool (not supplied). Note: since the chromatography column is used with…

  • Absorption chromatography column for rapid preparative separations as described by W.C. Still, M. Kahn and A. Mitra of Columbia University in JOURNAL OF ORGANIC CHEMISTRY 43, 2923 [1978], and covered in U.S. Patent Number 4,293,422 dated October 6, 1981. Moderate resolution can be obtained with this…

  • …peak shapes with polar and basic compound—ideal for carbohydrates Make connections to flash chromatography instruments quick, easy, and secure with Luer-lok connectors. Columns are made of polypropylene and have pressure ratings to support common flash chromatography back pressures.

  • Optimized column geometry provides maximum recovery Excellent for purification of a wide range of synthetic and natural compounds Make connections to flash chromatography instruments quick, easy, and secure with Luer-lok connectors. Columns are made of polypropylene and have pressure ratings…

  • … Has a pore size of 60Å and a carbon loading of ≈18% Make connections to flash chromatography instruments quick, easy, and secure with Luer-lok connectors. Columns are made of polypropylene and have pressure ratings to support common flash chromatography back pressures.

  • …Optimized column geometry provides maximum recovery Bonded octadecyl stationary phase offers reverse phase flash capabilities Has a pore size of 60Å and a carbon loading of ≈18% Make connections to flash chromatography instruments quick and easy with Luer connectors. Columns

  • column geometry provides maximum recovery Use to separate primary, secondary, and tertiary amines NH2 shows better peak shapes with polar and basic compound—ideal for carbohydrates Make connections to flash chromatography instruments quick and easy with Luer connectors. Columns are…

  • …and Buchi® Optimized column geometry provides maximum recovery Excellent for purification of a wide range of synthetic and natural compounds Make connections to flash chromatography instruments quick and easy with Luer connectors. Columns are made of polypropylene and have…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is…

  • Similar to CG-1186 but with a sealed in COARSE porosity fritted disc to support column packing. Lower end of the column has a round bottom. Column is constructed using MEDIUM WALL TUBING.

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a reinforced beaded top. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent…

  • …optional CG-1195 flow controller and CG-1194 reservoir. Column is constructed using MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom. Connections between the column, reservoir and flow control adapter are made using…

  • Large chromatography columns with o-ring grooved flat flanged tops and Ace-Thred bottoms. Column extenders and 5860 heads should be mated to columns with our 6517 series clamps. All columns and extenders are supplied with either a 7855-254 (4") or 7855-260 (6") silicone o-ring. For capfe o-rings,…

  • With 24/40 standard taper joint at top and a 2 mm bore stopcock at the bottom.

  • Rugged columns with internally threaded ends to which a wide choice of upper and lower end pieces can be fitted using 5837, 5838, 5841, 5842, and 5843 fittings. Available in a variety of lengths and diameters. Some sizes available with epoxy coating for added protection against scratches.

  • For use as column end fitting that allows connection of appropriate size Ace-Thred to tubing connectors with NPT threads. Available in various Ace-Thred and NPT sizes. Most come complete with both a 100 micron and a 350 micron polyethylene filter.

  • …general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top spherical socket joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Joint: SJ 35/20 Note: since the chromatography column is used with positive…

  • Unbreakable, polypropylene solvent addition funnels useful for chromatography columns. The unique closed-end design facilitates gentle addition of solvent to the column. Perforated funnel stem permits solvent to pour down the column wall without disturbing the top layer of silica gel. Convenient…

  • Support stand assembly for bench scale size Chromatography columns. "H" shaped base stand and 122cm high stainless steel rod gives great stability for the larger bench scale columns. Stand comes complete with base, rod, support plate with hole, clamp holder, chain clamp and cork ring.

  • …four post support stand for large scale chromatography columns. Each stand is designed to fit either 24", 48" or 72" length glass columns. Each stand has a PTFE collar at the bottom and an adjustable stainless steel collar at the top to support the column. All stands have locking casters for…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.