Chiller Tubing

Ai 1/2" insulated chiller silicone tubing. Inner tubing comes in translucent natural color for visual contact with the flow, able to resist temperature from -60°C to 100°C. Compatible Ai products C15-3-2L -15°C recirculating chiller C20-7 -20°C to 99°C…

Solid aluminum block, 24 positions, for micro centrifuge tubes up to 10.90 mm diameter at 32.25 mm from the bottom. Each tube individually spring-supported to compensate for Z-positioning errors of pipettor probes.

Designed to work with your standard PCR tubes, strips, and plates. These chillers change color from solid purple to pink as the cooling surface warms. This gives you a visual indication when your samples need to be returned to the freezer. These chillers will hold 0°C temperature for up to 4…

Small Tubing Pass-Throughs for passage of larger tubing through sidewall of Logic Vue for external equipment such as Aerosol Management Systems (AMS), chillers, and other supportive equipment. Inner tube and outer flange constructed of a 16 gauge 304 stainless steel. Adds 1.8" (4.6 cm) to…

Large Tubing Pass-Throughs for passage of larger tubing through sidewall of Logic Vue for external equipment such as Aerosol Management Systems (AMS), chillers, and other supportive equipment. Inner tube and outer flange constructed of a 16 gauge 304 stainless steel. Adds 1.8" (4.6 cm) to…

…1.4-6.9 bar.) which makes them well suited to applications that require higher pressure or experience a higher system pressure drop, such as long tubing runs or pumping vertically. A robust design makes turbine pumps very reliable and forgiving to impurities in the fluid stream. Bronze turbine pumps…

…enables you to see how cold your samples are at a glance. IsoFreeze® color change racks undergo a dramatic change to a contrasting color at 7ºC. Dimensions: 146 × 105 × 70 mm. Tube capacity: 24 x 0.5, 1.5, 2.0 mL snap or screw-cap style tubes. Rack comes with lid.

…tube rack directly onto a temperature source and it will rapidly adapt to that temperature from -150°C to >+100°C. ChillBlock™ tube racks ensure +/- 0.1°C temperature uniformity of all tubes when cooling, freezing or heating. ChillBlock™ Microcentrifuge Tube Racks are…

…therefore facilitating tube location. Depending on the model, they will accept 200 µL PCR tubes, strips, plates and most Microcentrifuge tubes. S700-56 Rack will hold twelve screw cap Microcentrifuge tubes or 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes along with up to 6 PCR strips…

…Profile Fit Microcentrifuge Tube Racks are available with either 15 & 30 wells holding 1.5 ml snap cap Microcentrifuge tubes. S700-14 is a 30-well rack and will hold 0.5 ml tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. Each cavity will…

Includes the TGA 8000 Sub-ambient Cooling Tube (N5370333), Hose clamps (09903004) and tubing (02506518) for connecting the Cooling Tube to the Chiller, and Instructions. When combined with the Chiller Accessory (N5370220 for 120V operation or N5370221 for 220 Volt operation) provides the ability to…

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 500ml Cap size: 70mm Sidearm cap size (mm): 38mm Flask dimensions: 140 x…

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 100ml Center cap size: 70mm Sidearm cap size (mm): 18

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 100ml Cap size: 70mm Sidearm cap size (mm): 18mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 8000ml Cap size: 100mm Sidearm cap size (mm): 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1l Cap size: 100mm Sidearm cap size (mm): 45mm

… The new Globe Rapid Chiller provides rapid cooling up to 12 biological samples in 1.5mL & 0.5mL tubes. This simple, no mess alternative to dry ice solvent baths will chill and re-chill samples for up to 45 minutes on the benchtop. Simply place the Rapid Chiller in a -20°C freezer for…

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 50ml Cap size: 51mm Sidearm cap size (mm): 18

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 500ml Cap size: 70mm Sidearm cap size (mm): 38mm Flask dimensions: 140 x…

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 8000ml Cap size: 100mm Sidearm cap size (mm): 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1300ml Cap size: 100mm Sidearm cap size (mm): 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 50ml Cap size: 51mm Sidearm cap size (mm): 18

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 6000ml Cap size: 100mm Sidearm cap size (mm): 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 250ml Cap size: 70mm Sidearm cap size (mm): 25mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1l Cap size: 100mm Sidearm cap size (mm): 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 6000ml Cap size: 100mm Sidearm cap size (mm): 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1300ml Cap size: 100mm Sidearm cap size (mm): 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 250ml Cap size: 70mm Sidearm cap size (mm): 25mm

…tube traverse may be higher). Logic Vue Large Tubing Pass-Through Port, 3/4" Small Tubing Pass-Throughs for passage of larger tubing through sidewall of Logic Vue for external equipment such as Aerosol Management Systems (AMS), chillers, and other supportive equipment. Inner tube…

…circulation for internal or external applications; Pressure 3.5-13.3 PSI, Suction 0.4-5.8 PSI; 16-31 L/min. Barbed fittings for 8 and 12 mm ID tubing are included (pump connections M16x1 male).  All MAGIO systems incorporate Pt100 connection for external monitoring and control,…

…process residue Easy accessed low-placed jacketed material feeding flask Improved simple design jacketed feeding tube for easy maintenance Pre-installed cooling/heating tubing with fluid direction labels and M16 ports Driving motor with magnetic coupling sealing ensures a high vacuum…

…inner glass surface allow a complete and uniform thin film on the heated surface, and prevent process residue  Pre-installed cooling/heating tubing with fluid direction labels and M16 ports  Low-placed feeding flask for ease of operation  Driving motor with magnetic coupling…