Chamber Furnace

Compare Tool

Select up to 3 products

Chamber Furnace
1 - 32 of 36
Sort
View
Show
  • 1100°C Stainless Steel Controlled Atmosphere Furnaces

    Across International

    GCF1100 series controlled atmosphere furnaces feature a chamber with polished stainless steel interior and the famous Kanthal (Sweden) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment…

  • Muffle Furnaces with Embedded Heating Elements in the Ceramic Muffle

    Nabertherm

    …Another aspect is the smooth, nearly particle free muffle (furnace door made of fiber insulation), an important quality feature for some ashing processes. Tmax 1100 °C Muffle heated from four sides Furnace chamber with embedded ceramic muffle, high resistance to aggressive…

  • Thermolyne™ Premium Large Muffle Furnaces

    Thermo Scientific

    …are located on the chamber top, bottom and sides for enhanced temperature uniformity Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit Rear of the chamber incorporates a 0.312 in. diameter port for monitoring chamber temperatures with…

  • 1200°C LGO Box/Ashing Furnaces

    Lindberg/Blue M

    …are designed into each furnace. Features include an adjustable over temperature control (OTC) that overrides the main controller and shuts off power to the furnace if high limit is reached. The flow meter (FM) option is suitable for inert gas or air flow to the chamber and allows fresh air exchange…

  • Muffle Furnaces with Brick Insulation

    Nabertherm

    furnace chamber Housing made of sheets of textured stainless steel Dual shell housing for low external temperatures and stability Optional flap door (L) which can be used as work platform or lift door (LT) with hot surface facing away from the operator Adjustable air inlet in the furnace

  • High-Temperature Chamber Furnaces with SiC Rod Heating

    Nabertherm

    …the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory. Heating times of 40 minutes to 1400°C can be achieved, depending on the furnace model and the conditions of use. Tmax 1400°C, 1500°C, or 1600°C …

  • Thermolyne BenchTop Muffle Furnaces, 1200°C

    Barnstead

    …insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature gradient. Furnaces offer 120 or 350 cubic inches of heating area and a ceramic shelf is included to double furnace load capacity. …

  • Compact Muffle Furnaces

    Nabertherm

    With their unbeatable price/performance ratio, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual shell furnace housing of rust-free stainless steel, their compact, lightweight constructions, or the heating elements encased in quartz…

  • High-Temperature Chamber Furnaces with MoSi2 Heating Elements

    Nabertherm

    furnaces all-rounders in research and the laboratory. These furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges. Tmax 1600°C, 1750°C, or 1800°C High-quality molybdenum disilicide heating elements Furnace chamber

  • 1400°C Muffle Furnaces

    Across International

    CF1400 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and silicon carbide (SiC) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • 1400°C Max Controlled Atmosphere Muffle Furnaces

    Across International

    …of the furnace. You can also save or export test results. All our furnaces are CE compliant. Features Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded…

  • Thermo Scientific 1200°C Box Furnace

    Lindberg/Blue M

    …wire for extended service life Located at top, bottom, and sides of chamber for uniform heat distribution Small sight glass window allows observation of load without opening spring-loaded, insulated plug door furnaces require a controller (see 5326H10 through H16) Model 5317B11 is a refractory…

  • 1800°C Muffle Furnaces

    Across International

    …series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1900 alumina fiber insulation and the famous Kanthal (Sweden) molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled…

  • 1600°C Muffle Furnaces

    Across International

    CF1600 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • 1-Zone 1800°C Tube Furnaces

    Across International

    …series tube furnaces feature a chamber with Mitsubishi (Japan) high quality 1900 grade alumina fiber insulation and the famous Kanthal (Sweden) 1900 grade molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation…

  • Thermolyne™ Largest Tabletop Muffle Furnaces

    Barnstead

    …with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ Largest Tabletop Muffle Furnace. Desiged for safe operation, these furnaces are available in three temperature control models. They are ideal for annealing glass, determinations of volatiles, catalyst…

  • Professional Chamber Furnaces

    Nabertherm

    The LH 15/12 - LF 120/14 laboratory furnaces have been trusted for many years as professional chamber furnaces for the laboratory. These furnaces are available with either a robust insulation of light refractory bricks (LH models) or with a combination insulation of refractory bricks in the corners…

  • Furnace Muffle 1200C SSP 240V

    Barnstead

    …on furnace top, bottom, and sides for fast and even heating LED display that shows the chamber temperature as the unit heats The counter-weighted front door swings up when opened, which vents heated air up and away from the operator Heavy-duty firebrick insulation surrounds chamber opening…

  • Furnace Bench Mufl Con M, 350Ci, SSP 240V

    Barnstead

    …elements on chamber sides assure fast heat-up with minimum temperature gradient Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency 0.95cm (0.38 in.) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber

  • 1700°C Muffle Furnaces

    Across International

    CF1700 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • 1-Zone 1400°C Tube Furnaces

    Across International

    TF1400 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A dual-wall steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller…

  • 1-Zone 1700°C Tube Furnaces

    Across International

    TF1700 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment…

  • 1-Zone 1200°C Vertical Tube Furnaces

    Across International

    …to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant. Features Compact, portable and lightweight design. Split furnace chamber for fast and easy tube access. Standard package includes set…

  • 1-Zone 1200°C Split Tube Furnaces

    Across International

    …to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant. Features Compact, portable and lightweight design. Split furnace chamber for fast and easy tube access. Standard package includes set…

  • 1700°C Max Controlled Atmosphere Muffle Furnaces

    Across International

    …of the furnace. You can also save or export test results. All our furnaces are CE compliant. Features Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded…

  • 1100°C Max Controlled Atmosphere Muffle Furnaces

    Across International

    …of the furnace. You can also save or export test results. All our furnaces are CE compliant. Features Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded…

  • Thermo Scientific 1700°C Box Furnaces

    Lindberg/Blue M

    …heat surge and swings away from furnace opening for full and easy access to chamber. Power disconnect switch cuts power when door is opened. Removable panels provide easy access to heating elements and thermocouples. Moldatherm hearthplate protects furnace from spillage and mishandling. High-volume…

  • 1-Zone 1200°C 50mm OD Split Tube Furnaces

    Across International

    …housing helps minimize heat loss to exterior surface. Furnace operation is controlled by a 30-segment digital controller. All our furnaces are CE compliant. Features Compact, portable and lightweight design. Split furnace chamber for fast and easy tube access. Standard package…

  • Thermolyne™ Atmosphere Controlled Ashing Furnaces

    Thermo Scientific

    …adjusting the airflow rate Stainless-steel manifold at rear chamber prewarms incoming gases, provides a maximum temperature gradient of only ±3°C at 750°C Chamber rear has a 0.95cm (0.38in.) port for monitoring chamber temperatures with independent measuring devices With…

  • FP Series High-Performance Muffle Furnaces

    Yamato

    Yamato muffle furnaces are recognized for their durability and tightly sealed doors which is of utmost importance when the furnace reaches their maximum temperatures of over 1000°C. The FP Series represents the high performance type of muffle furnaces that use a microprocessor-controlled…

  • Lindberg/Blue M™ 1700°C Tube Furnaces

    Lindberg/Blue M

    Achieve rapid heat up, recovery and cool down with a tube furnace that delivers outstanding energy release, reducing thermal process cycle time. Thermo Scientific™ Lindberg/Blue M™ 1700°C Tube Furnaces feature heating elements with unique right-angle bend and sidewall mounting to…

  • Thermo Scientific 1100°C Moldatherm® Box Furnaces

    Lindberg/Blue M

    For operation up to 1100°C (1980°F) These models also serve as Ashing Furnaces Side hinge door keeps the furnace hot face away from the user Atmosphere vent allows for atmosphere removal, ventilation and air injection Safety interlock system disconnects the power to the heating elements when…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.