Centrifuge Vortexer

…program of sample mixing and spinning 12 tubes at once, when compared with removing the tubes for vortexing after every spin. Centrifugation speed: PCV 6000 up to 6000 rpm Vortex mixing modes - soft, medium and hard with regulated timer of 1 to 20 seconds, with automatic switch-off…

…strength, wide temperature stability, and to perform in your critical applications. They will protect your valuable samples during centrifugation, vortexing, and long term storage in the freezer. To meet this intense challenge, Falcon tubes are designed for: High strength: State-of-the-art…

…energy of an unequaled stepper motor, allowing for a wide variety of mixing, vibrating, and rotating cycles. This multipurpose unit is a rotator, vortex mixer, and blotter all in one. Cold room safe with an unprecedented 34 modes of operation, this versatile piece is unrivaled in today’s…

Mixes multiple samples for better reproducibility Variable speed range: 100 to 2000 RPM Pulsing feature interrupts vortexing to join upper and lower strata for more thorough mixing DC motor with filter control for smoother operation and longer life Set speed and pulsing to identical time for…

…Mini Vortexer from Argos Technologies is an unbelievably compact, yet powerful instrument engineered to mix tubes quickly and easily. The vortexing motion is activated by placing a tube on the gasket cap and then pressing down lightly. The innovative design of the gasket cap allows centrifuge and…

…devices in one: Centrifuge with vortex mixing PCR plate centrifuge PCR plate mixer Key Features Centrifuge and vortex mixer combined for significant time saving Centrifugation mixing speed: 300 to 1500 rpm Independent vortex and centrifuge timers with up to 999…

…rpm. Designed for mixing small test samples. Small, compact and reliable For small containers up to 30 mm in diameter, e.g. test tubes, centrifuge tubes, Eppendorf beakers Infinitely adjustable speed from 1000 – 2800 rpm Excellent mixing action The upper casing and the test tube surface…

A fully programmable large high speed large capacity vortex mixer designed to hold and provide true vortexing in a variety of containers. High Speed vortexing up to 2000RPM Programmable gentle ramp up to speed, allows use of open containers Digital control and display of speed and…

…standard German-designed equipment, including centrifuges, dry bath block heaters, tube racks and thermal shakers/vortexers. The 16mm tube diameter is identical to the diameter of standard 15ml tubes, which nsures further compatibility with centrifuge rotors, etc. In many applications, these…

…and continuously active. This vortexing unit has a timer setting from 1 to 999 mins. It has optional vortex mixer attachments for microtubes, a microplate, or a beaker.This vortexer has a digital display that shows speed and time alternately every 5 secs. The vortex mixer has a user-enabled run time…

The Corning variable speed LSE Vortex Mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, continuous or "touch" mix modes. A range of accessories are available for all common sample tubes and containers. Features: …

Electroelution of nucleic acids and proteins has many advantages as it avoids centrifugation, vortexing, heating, precipitation and allows minimal manipulation of samples. Electroelution normally involves dialysis tubing, which results in extreme dilution of precious samples. G-Capsule™ is a…

…surface is also noise dampening, reducing sound from the vibration of common benchtop equipment. The lab mat can be used with items such as centrifuges, vortex mixers, hot plates, stirrers, pipettes and so much more. When using the mat with magnetic stirrers, there is a designated area with internal…

…temperature for up to one month by adding the Urine Conditioning Buffer. When ready to extract the urine DNA, just add the Clearing Beads, vortex, and centrifuge to collect the precipitate. Following precipitation, chemical lysis and enzymatic digestion are used to extract DNA from the precipitate.…

…the standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine. Centrifugal pumping action, generated by the cross channels in the upper face, mixes without aeration Photometric measurements…

…saliva has been collected for subsequent analysis. The Collection Strip is then transferred to a transport tube for delivery to a laboratory. Upon receipt at the laboratory the sample is removed by vortexing or centrifugation and is then ready for drug or alternate analysis by various methods.

…shock. f. Gently mix the cell suspension by slow pipeting up and down twice. Be careful to not introduce any bubbles. IMPORTANT: Do not vortex the cells. g. Centrifuge the tube at 300 x g for 2-3 minutes to pellet the cells. h. Decant as much of the supernatant as possible i. Resuspend the cells in…

…microcentrifuge tubes. Centrifugal pellets, precipitates, and other solids are completely dispersed in seconds by a combination of mechanical and vortex action. A new polypropylene stir rod is used with each sample. A practical alternative to conventional vortex mixer for mixing and dispersing…

Simple to use centrifuge with a compact and space-saving design. Performs speedy rotations for sample separations. Maximizes performance with tool-free snapsin rotors. Quick and easily change out rotors with just one touch. Supplied with: 6 1.5/2.0ml tube rotor, 16 place 0.2ml tube rotor…

Processes up to 110 samples simultaneously Microprocessor control RapidVap Vacuum Evaporation System, uses vortex motion, vacuum and heat to prepare samples for a variety of applications including drug discovery, agrichemistry, mycology testing and environmental analysis. Up to 110 samples may be…

…preparation 2.0 mL deep well—suitable for mixing by vortex or pipette 3-way versatility for filtration—compatible with all common devices: Vacuum manifold, Positive pressure manifold, Centrifugation Can also be used to increase throughput in general filtration…

…Tubes without caps. Resealable bags. Not for vortexing. Without caps Includes side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) Polypropylene USP Class VI resin High centrifuging to 20,000 x G Freezable to -80C Autoclavable…

…and are certified RNase and DNase free.  The 16mm diameter is identical to standard 15mL tubes, ensuring compatibility with existing centrifuge rotors.  Other equipment, specially designed for 5mL tubes, is available from Benchmark™ (USA) and German-based equipment manufacturers…

… Vortex and heat to 90-100 °C for 10 minutes. Spin at 10,000xg for 3 minutes, collect supernatant, and load onto the gel. Avoid loading Anti-Rabbit Ig Beads. Note: The supernatant can be stored at -20 °C for future use. After thawing, add fresh dithiothreitol and heat as above. Centrifuge the…

…pellet. Vortex and heat to 90-100 °C for 10 minutes. Spin at 10,000xg for 3 minutes, collect supernatant, and load onto the gel. Avoid loading Anti-goat Ig beads. Note: The supernatant can be stored at -20 °C for future use. After thawing, add dithiothreitol and heat as above. Centrifuge the…

… Vortex and heat to 90-100 °C for 10 minutes. Spin at 10,000xg for 3 minutes, collect supernatant, and load onto the gel. Avoid loading Anti-Mouse Ig Beads. Note: The supernatant can be stored at -20 °C for future use. After thawing, add fresh dithiothreitol and heat as above. Centrifuge the…

…shakers by using our CLS-4008-T03 double faced tape.Tubes must be purchased separately. MICRO CENTRIFUGE COOL BLOCKS, COMBINATION, Holds 0.2mL, 0.5mL, 1.5mL, and 2.0mL Centrifuge Tubes Dimensions 6” x 3.2” x 1.5” Ideal for Cooling or Heating Multiple Tubes…

Fast, unattended concentration of environmental samples Combines mechanical vortex, heat and nitrogen blow down technologies Process eight samples up to 450 mL in size at once Vortexes up to 500 rpm. Heat warms samples from ambient to 70°C. The nitrogen blow down manifold is microprocessor…

…form: Lyophilized from 5 mM Sodium Phosphate, pH 5.5 + 0.5 mM DTT. Reconstitution: Centrifuge the vial prior to opening. Reconstitute in water to a concentration of 0.1-1.0 mg/ml. Do not vortex. This solution can be stored at 2-8C for up to 1 week. For extended storage, it is recommended…

…Lyophilized from 10 mM Sodium Phosphate, pH 7.5 + 0.1 mM Calcium Chloride. Reconstitution: Centrifuge the vial prior to opening. Reconstitute in water to a concentration of 0.5-1.0 mg/ml. Do not vortex. This solution can be stored at 2-8C for up to 1 week. For extended storage, it is recommended…

…cells. Physical form: Lyophilized from 10 mM Sodium Citrate, pH 4.0. Reconstitution: Centrifuge the vial prior to opening. Reconstitute in water to a concentration of 0.1-1.0 mg/ml. Do not vortex. This solution can be stored at 2-8C for up to 1 week. For extended storage, it is recommended…

…first subjected to protein precipitation via the addition and mixing of acidified acetonitrile. Precipitated proteins are then removed by centrifugation and the resulting supernatant is loaded on the HybridSPE-Phospholipid 96-well plate or cartridge which acts as a chemical filter that specifically…