Centrifuge Tubes Polystyrene

Compare Tool

Select up to 3 products

Centrifuge Tubes Polystyrene
33 - 60 of 60
Sort
View
Show
  • 16 x 100mm Test Tubes

    Globe Scientific

    …line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and…

  • …(1224L57) Dimensions: 16mm x 92mm (1224L58-L59) Universal Tubes 30mL universal tube Attached screwcap Self-standing, conical bottom Polypropylene (PP) or Polystyrene (PS) 50mL Centrifuge Tubes, Self-Standing, Polypropylene (PP) Available in non-sterile…

  • Autofil® Centrifuge Tube Stand

    Foxx Life Sciences

    …Sciences' Centrifuge Tube Stands are intended for use with centrifuge tubes. They are made from Class VI, FDA Grade, BPA-Free Polystyrene, and are conveniently sold in packs of 5. Autofil tube stand can hold one 15ml or 50ml tube Can also be used with the Autofil Centrifuge Filtration…

  • …-90°C. Polystyrene tubes are not autoclavable but have a nominal temperature range between 90°C and -40°C. Polyethylene caps are not autoclavable, but are available sterile with many of the tube packages. Polypropylene tubes can be centrifuged to 3000 RCF and polystyrene tubes will…

  • This top quality line of centrifuge tubes feature flat-top, plug-seal leak resistant screw caps, a large white writing area and printed graduation marks. Sterile tubes are RNase free, DNase free and Pyrogen free. Polystyrene (PS) Cap is made from High Density Polyethylene (HDPE) …

  • Holds conical bottom tubes Polystyrene foam racks are designed to hold 25 Corning 15 mL conical bottom plastic centrifuge tubes.

  • 15 ml centrifuge tubes are precision molded from premium-grade, chemically-inert thermoplastics. Polystyrene tubes are glass-clear and our new formulation of polypropylene is nearly transparent. Accurate, easy-to-read graduations are molded-in at 0.1 ml intervals from 0-1 ml and at 0.5 ml…

  • …of five plastic bags each containing: 100 flared top or rimmed polystyrene centrifuge tubes 100 polyethylene (PE) snap caps 100 adhesive patient I.D. labels 100 collection cups (3.5oz) Optional - 5 cardboard test tube racks (10-place) The Uri-Pak™ System is economically priced and…

  • Holds two sizes of conical bottom tubes Polystyrene foam racks are designed to hold Corning 15 and 50 mL conical bottom plastic centrifuge tubes in the same rack.

  • Urine Collection System

    Globe Scientific

    This line of centrifuge tubes has been designed specifically for urinalysis procedures. The tubes offer a flared-opening which is designed to make pouring off easy.  Dimensions: 21 x 105mm Polystyrene (PS) Spin Rate: 1500 RCF 

  • …(clarification grade) PES membranes. The complete system is composed of a polystyrene filter funnel and receiver bottle, a SECUREgrasp cap, and a vacuum hose adapter. Systems with 15 mL and 50 mL polypropylene centrifuge tubes are also available. Filtration funnels are compatible with the…

  • Vivaspin® Turbo 4

    Sartorius

    …of the concentrate. Vivaspin® Turbo 4 can handle up to 4 ml sample volume in 4 swing-out and fixed angle rotors accepting 15 ml centrifuge tubes. The Vivaspin® Turbo 4 optimised design, the sleek internal profile, ensures maximum process speeds right the way down to the last few…

  • …These racks are designed for Labcon centrifuge tubes, other tube brands may not fit correctly. 25 Place Holds 50 mL conical centrifuge tubes Includes numbered wells Racks lock together to form work stations Replaces disposable polystyrene foam racks Made of polypropylene …

  • …for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic…

  • …cultures. Transparent polystyrene tubes will withstand moderate centrifugation speeds (1400g) and temperatures to 70 °C. Translucent polypropylene tubes can be centrifuged at higher speeds (3000g) and resist temperatures from -190 °C to 120 °C. Tubes are supplied with either a…

  • …Non-sterile. Polypropylene tubes (PP) are translucent and will withstand over 3000 g during centrifugation. They will also accept most common acids, solvents and alkalies at room temperature. They are almost unbreakable and can be sterilized at 120°C. Polystyrene tubes (PS) are transparent…

  • tubes are translucent and will withstand over 3000g during centrifugation. They will also accept most common acids, solvents and alkalies at room temperature. They are almost unbreakable and can be sterilized at 120° C. Polystyrene tubes are transparent and will withstand centrifugation speeds…

  • …-90°C. Polystyrene tubes are not autoclavable but have a nominal temperature range between 90°C and -40°C. Polyethylene caps are not autoclavable, but are available sterile with many of the tube packages. Polypropylene tubes can be centrifuged to 3000 RCF and polystyrene tubes will…

  • Tube made of polystyrene / Cap made of polyethylene. These 8 ml screw cap tubes are available either sterile or non sterile. A special tamper evident cap is offered for applications needing the utmost security where sample integrity is of high importance. Tubes are made of optically clear…

  • Made of high impact polystyrene This microcentrifuge tube storage box with a polyurethane foam insert is ideal for holding up to 64 tubes from 0.5 ml to 2 ml. It should be used within a temperature range of -90 °C to 80 °C. A transparent cover allows you to see the contents of the box, and…

  • Conical Tube Rack

    Thermo Scientific Nunc

    Fit most centrifuge tubes in the tightness-tested Thermo Scientific™ Nunc™ Conical Tube Rack. Hold 6 x 200mL tubes or 20 x 50mL tubes Epoxy/steel or expanded polystyrene foam Meets USP Class VI

  • …cut diameter: 9.4 mm (0.370") Retrieve radioactive pellets from the tips of tubes easily without resuspension or the risk of splashed radioactive substances. Can be used with polyethlyene, polypropylene or polyallomer tubes. NOTE: not recommended for use with polystyrene tubes.

  • Scienceware® 50mL Tube Holders

    Bel-Art - SP Scienceware

    Polystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top

  • Polypropylene tubes withstand up to 12,000 × g. Polyethylene tubes withstand force to 6,000 × g. Our polystyrene tubes withstand 3,000 × g and are useful in lipid fractionation.

  • …culture of small organs, tissue slices or explants at the air-media interface Provides coarse filtration of tissue homogenates, cell suspensions and microcarriers Supplied sterile and pre-loaded in 6-well microplates 24mm Netwell inserts fit in Corning 50mL plastic centrifuge tubes

  • …case). Urine tubes are made of virgin polystyrene and are free of any mold release agents, metals or additives that could contaminate samples. They are made of heavy wall construction, graduated at 1/4, 1/2, 1, 2 and every 2 ml thereafter up to 12 ml, and can be safely centrifuged at speeds…

  • Urine Container

    Biomedical Polymers

    …20 tubes with labels and caps. The tubes are made of sturdy polystyrene and are safe for centrifuging. The flared top permits the use of a midget urinometer ensuring a tight cap fit. All elements of the system are disposable. A case contains 500 specimen collection cups, 500 15 mL collection tubes,

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.