Centrifuge Tubes Glass 50 Ml

Borosilicate glass Capacity: 6.5 mL Narrow tip 15 mL shields Graduations (mL): stem to 0.4 in 0.01 from 0.4 to 1 in 0.1 at 1.5, 2.0, 3.0, 4.0 and 6.5 (body)

Without stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations:  from 1 to 5 mL in 1 mL   from 5 to 50 mL in 5 mL   from 50 to 100 mL in 10 mL divisions

…strengthened Can be centrifuged up to 13,100 RCF (with appropriate rubber sleeve adapter in a 50 mL rotor cavity) 15 mL and 30 mL reusable tubes achieve greater mechanical strength than standard glass centrifuge tubes. Manufactured from Type 1, Class B, borosilicate glass, they are fully…

…50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length 116 mm; o.d. 29 mm Fits 50…

…of cultures Available in 35 mL and 50 mL sizes, both of which are 29 mm o.d. and fit 50 mL shields Length of 50 mL size, which is approximately 126 mm, makes it incompatible for some centrifuge and rotor combinations; overall length of 35 mL size is 106 mm. Complete with unattached…

…greater mechanical strength Capacity 100 mL Stem has white graduations from 0 to 1.5 mL in 0.1 mL divisions; body is graduated from 1.5 mL to 5 mL in   0.5 mL divisions, from 5 mL to 10 mL in 1 mL divisions and at 15, 20, 25, 50 and 100 mL . Dimensions: O.D. 43.5 mm to 44.5 mm…

… Oil Centrifuge Tube (2623Q33) In accordance with ASTM D 96 Capacity 125 mL Graduations: from 5 to 10 in 1 from 10 to 25 in 5 at 50 and 100 per ASTM Standard D 96 Fits Thomas number 2525C07 Carrier and 2525C05 Rotor in IEC Centrifuges.

These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…

2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…

…50 ml KIMAX tube has a short tapered bottom. Graduated and calibrated to contain. The top end has a pour spout. Scale, legend and marking spot are durable white ceramic enamel. 50ml total capacity; graduated from 0-10 ml in increments of 0.5 ml and from 10-50 ml in increments of 1 ml

Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

KIMAX tube used for the determination of small quantities of solids in large volumes of liquids. Calibrated to contain. Stem is graduated in 0.01 mL to 0.2 mL and the body has graduations at 25, 50, and 100 mL. Recommended for the determination of free water and sediment in diesel and other…

Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of ac

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. Tubes are plastic shrink…

…Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes have a finished top for a snap-cap closure. The 50 mL size has a tooled top. Tubes are plastic…

The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Holder accommodates up to eight 50 mL glass centrifuge tubes and test tubes up to 28 mm diameter, 140-180 mm long (stoppered) Up to 2 holders can be shaken at once …

These disposable 50mL Pyrex® glass centrifuge tubes are manufactured from Type I borosilicate glass and have a GPI 24-400 thread. They are supplied without caps. The tubes are designed to withstand centrifugation up to 3,000 RCF and are packed in convenie

…SAMPLE TUBES, A coaxial insert consists of an upper glass alignment tube with a precise outer diameter that fits very closely within the matching 5mm or 10mm thin wall outer glass NMR tube, ensuring accurate coaxiality and centering of the insert within the outer NMR tube.The lower glass stem tube,…

…x 1.5 mL tubes and other formats). A variety of rotors are available for both systems to support sample formats from micro-centrifuge tubes, vials and microplates to large-volume flasks. Both systems fit in a standard laboratory fume hood. Benefits Proven reliability: Over 50 years of…

…x 1.5 mL tubes and other formats). A variety of rotors are available for both systems to support sample formats from micro-centrifuge tubes, vials and microplates to large-volume flasks. Both systems fit in a standard laboratory fume hood. Benefits Proven reliability: Over 50 years of…

…100 ml with double dist. water. TBE-Buffer Dissolve 5.4 g Tris, 2.8 g Boric acid in 800 ml double dist. water and add 2 ml of 0.5 M EDTA solution . Stir until dissolved, final pH 8.0 ± 0.1. Fill up to 1 liter with double dist. water. Ethidium bromide stock solution Dissolve 50 mg…