Centrifuge Test Tubes

Compare Tool

Select up to 3 products

Centrifuge Test Tubes
1 - 32 of 206
Sort
View
Show


caplugs

  • 12mL Centrifuge Test Tubes

    Globe Scientific

    …and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Globe's broad range of sizes are sure to fit most laboratory applications. 12mL centrifuge tube with rim, conical bottom, graduated.…

  • 15 mL Centrifuge Test Tubes

    Globe Scientific

    …solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Globe's broad range of sizes are sure to fit most laboratory applications. 17 x 120mm (15mL capacity) test tube with conical bottom, graduated.…

  • Sample Holder 8,10,12mm dia. Test Tubes and Centrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    Sample Holder 8,10,12mm dia. Test Tubes and Centrifuge Tubes. For use with the following Thomas Scientific balances: TS-T Series (0.01mg or 0.1mg readability) TS-L Series (0.01mg or 0.1mg readability)

  • …upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

  • The LW Scientific Zip-IQ TT centrifuge is an impressive 6-place test tube centrifuge for spinning blood, urine, and other fluids in 0.5ml to 15ml test tubes and microtubes. This attractive unit is very small, conserving valuable counter space in the lab, but also sturdy and heavy with suction-cupped…

  • Rotor for 12 x 15ml Test Tubes (PrepSpin Centrifuge) Maximum volume of applied test tubes: 15 ml. Maximum sizes of the applied test tubes: (D x L) 16.8 x 140mm. Top speed: 3500 rpm.

  • Ultra-High-Speed 15mL & 50mL Polypropylene Centrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    labForce Ultra-High-Speed 15mL & 50mL Centrifuge Tubes have been designed for high speed centrifugation and meet the demands of the most crucial scientific work. Produced using premium grade USP Class VI resins in an automated, touch free manufacturing process that provides both ultimate…

  • …your valuable samples during centrifugation, vortexing, and long term storage in the freezer. To meet this intense challenge, Falcon tubes are designed for: High strength: State-of-the-art mold design, coupled with advanced resin selection, create tube walls that are engineered to perform…

  • tubes provide excellent chemical resistance and mechanical strength. They are strong, moderately rigid, and well-suited for most disposable centrifuge applications. PET tubes offer excellent optical clarity for ease of measurement, observation, and test recording. Caps: These tubes are…

  • …The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top surface for easy marking and labeling.  Cat. No. C2605 features a ‘skirted’ bottom that allows the tube to stand upright without a separate test tube rack. …

  • Centrifuge Tubes

    Biologix

    … Specifications Working temperature: stable from -20°C to 121°C (except flat-top cap) 15ml and 50ml tubes can withstand centrifugation of 8,400 and 9,400 RCF respectively Sealing test: complies with The International Air Transport Association (IATA) Safety Standards

  • Centrifuge Tubes

    Chemglass

    TUBES, CENTRIFUGE, 50ML, Centrifuge tube with a short, conical bottom and 24-415 GPI threaded top. Fits I.E.C. shield number 320. Supplied complete with a Poly-Seal® polypropylene lined phenolic screw cap. TEST TUBE TONGS, Tongs are made of zinc coated steel, 6" overall length. Spring…

  • Test Tubes

    Globe Scientific

    …extensive line of mulit-use test tubes. They are molded from premium grade polystyrene for clarity or of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM…

  • Test Tube Brushes

    Allied K&R

    For use on test tubes, centrifuge tubes, small jars, cylinders, etc. Of white nylon bristle with radial tufted end and twisted wire handle with loop Package contains 6 brushes

  • Conical Centrifuge Tubes

    Heathrow Scientific

    Premium 15 mL and 50 mL conical tubes manufactured from high-clarity polypropylene. Features dark imprinted graduations and a large white writing area for sample identification. Flat polyethylene cap also provides another opportunity for labeling. Available in sterile bulk and racked…

  • …made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for anaerobic use, storage, transfer and centrifuge applications.

  • 11mL Polycarbonate Centrifuge Tubes

    Thermo Scientific Nunc

    Made in a variety of materials and formats for greater flexibility Different cap types and bottom shapes to meet all needs Fits most standard centrifuges Relative centrifugal force tested Tightness tested Available DNAse- and RNAse-free certification.

  • Posi-Click™ Low-Binding Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    …Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Fits all standard 0.5, 1.5, and 2.0mL centrifuge rotors,…

  • Lazer-Fused™ Petroleum Centrifuge Tubes

    DWK Life Sciences (Kimble)

    …Cone Centrifuge Tubes Used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products (D1796 and MPMS 10.4 standards); in determination of volume of precipitate, black oils and other lubricating oils (ASTM D91 and D128); and in testing for acidity…

  • 15mL Centrifuge Tubes

    Evergreen Scientific

    15 ml centrifuge tubes are precision molded from premium-grade, chemically-inert thermoplastics. Polystyrene tubes are glass-clear and our new formulation of polypropylene is nearly transparent. Accurate, easy-to-read graduations are molded-in at 0.1 ml intervals from 0-1 ml and at 0.5 ml…

  • Posi-Click™ Microcentrifuge Tubes Without Caps

    labForce® (a Thomas Scientific Brand)

    Posi-Click™ capless tubes are ideal for customers not needing to seal their samples.  With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear…

  • Posi-Click™ 5 mL Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature large, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 5.0mL centrifuge rotors, racks, and storage boxes. Designed to fit all rotors, racks, and storage boxes that fit 5mL or 15mL tubes; no…

  • 11 x 70mm Test Tubes

    Globe Scientific

    …extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM…

  • Posi-Click™ 2.0 mL Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes

  • Posi-Click™ Small Cap Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits standard centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes to be…

  • Wide-Mouth Conical Centrifuge Tubes

    Thermo Scientific Nunc

    …Scientific™ Nunc™ 250 mL Conical Tube offers added capacity for your larger samples with a one-of-a-kind wide mouth design, providing open, easy access for pipetting, decanting and removal of the pellet following centrifugation. Wide mouth design; 250mL capacity RNAse/DNAse…

  • 12 x 55mm Test Tubes

    Globe Scientific

    …extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM…

  • Posi-Click™ 0.6 mL Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 0.5mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes

  • 16 x 150mm Test Tubes

    Globe Scientific

    …extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM…

  • 12 x 86mm Test Tubes

    Globe Scientific

    …extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM…

  • …resin. PerformR® tubes can be used in everyday lab work and give you more value than lesser quality tubes. High Performance Centrifugation PerformR® Centrifuge tubes are designed for your everyday centrifugation and storage needs. These tubes include large white solvent…

  • 17 x 100mm Test Tubes

    Globe Scientific

    …extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.