Centrifuge 48

Centrifuge 5427 R is a refrigerated microcentrifuge that was designed with high-throughput research applications in mind. With its aerosol-tight 48-place rotor it handles even the toughest challenges in a safe and reliable manner to provide you the efficiency boost you need. Key product features:…

This  bench-top microcentrifuge is ideal for quick spin-downs of micro-centrifuge tubes. Includes an 12-position 1.5/2 mL tube rotor as well as a 4-position 12-strip PCR tube rotor that can accommodate 48 individual PCR tubes or 0.2mL strip tubes.

…90: (1) Centrifuge, (1) Fixed Angle Rotor, (24) Adapters for 1.5 mL, (1) Bio-containment Lid Microliter Tube Package - 30: (1) Centrifuge, (1) Fixed Angle Rotor, (30) Adapters for 1.5 mL, (1) Bio-containment Lid Microliter Tube Package - 48: (1) Centrifuge, (1) Fixed Angle Rotor, (48)…

…from Multiple Well Plates or Tubes J-Hook is curved on the end to vertically lift cells from 6, 12, 24 and 48 Well Plates Narrow Blade is tapered to fit into a 96 Well Plate or Micro Centrifuge Tubes Cell Scrapers & Cell Lifters are non-pyrogenic and packaged sterile (gamma irradiated)

…from Multiple Well Plates or Tubes J-Hook is curved on the end to vertically lift cells from 6, 12, 24 and 48 Well Plates Narrow Blade is tapered to fit into a 96 Well Plate or Micro Centrifuge Tubes Cell Scrapers & Cell Lifters are non-pyrogenic and packaged sterile (gamma irradiated)

…from Multiple Well Plates or Tubes J-Hook is curved on the end to vertically lift cells from 6, 12, 24 and 48 Well Plates Narrow Blade is tapered to fit into a 96 Well Plate or Micro Centrifuge Tubes Cell Scrapers & Cell Lifters are non-pyrogenic and packaged sterile (gamma irradiated)

Rapidly concentrates multiple samples New style, compact with small footprint Built-in vacuum delay Centrifuge up to 1725 rpm Easy-to-read digital control panel Epoxy coated aluminum base, acrylic lid, phenol-free gasket compliment this system. Optional “heat boost”…

…from Multiple Well Plates or Tubes J-Hook is curved on the end to vertically lift cells from 6, 12, 24 and 48 Well Plates Narrow Blade is tapered to fit into a 96 Well Plate or Micro Centrifuge Tubes Cell Scrapers & Cell Lifters are non-pyrogenic and packaged sterile (gamma irradiated)

…from Multiple Well Plates or Tubes J-Hook is curved on the end to vertically lift cells from 6, 12, 24 and 48 Well Plates Narrow Blade is tapered to fit into a 96 Well Plate or Micro Centrifuge Tubes Cell Scrapers & Cell Lifters are non-pyrogenic and packaged sterile (gamma irradiated)

Both the 24-place and 36-place rotors have an easy, snap-on lid for quick rotor access Rotors are autoclavable at 121°C The 24-place rotor can also be used with an aerosol-tight lid to protect against harmful aerosols such as viruses or radioactivity

…from Multiple Well Plates or Tubes J-Hook is curved on the end to vertically lift cells from 6, 12, 24 and 48 Well Plates Narrow Blade is tapered to fit into a 96 Well Plate or Micro Centrifuge Tubes Cell Scrapers & Cell Lifters are non-pyrogenic and packaged sterile (gamma irradiated)

…Multipurpose centrifuges PCR strip rotor serves all models New rotors expand the versatility of the 5800 series For a variety of applications and capacities PCR TUBE STRIP ROTOR (For models 5804, 5804 R, 5810, 5810 R) spins 6 x 8 PCR tube strips or 48 x 0.2 mL PCR tubes…

… The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,000 x g with full loads of up to 48 x 50ml or 68 x 15ml tubes.…

…for use with Thermo Scientific Sorvall Legend X1, X3, Sorvall ST 40, Heraeus Multifuge X1, X3, Heraeus Megafuge 40, SL40 centrifuges. Maximal rotor capacity: 48 x 2 mL Reduces run-times with higher G-forces achieved with lightweight carbon fiber rotors Ensures structural integrity…

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

Molded from high quality medical polypropylene material, produced in a clean room, these premium cryo tubes withstand temperature low to -196°C under gaseous phase of liquid nitrogen. The special cap pf external thread design and with silicone rubber liner gasket eliminates the possibility of…

Combine the best of both worlds with Centrifuge 5430 and 5430 R. These high-speed centrifuges have the small footprint of a microcentrifuge and the versatility of a multipurpose centrifuge.

…culture of small organs, tissue slices or explants at the air-media interface Provides coarse filtration of tissue homogenates, cell suspensions and microcarriers Supplied sterile and pre-loaded in 6-well microplates 24mm Netwell inserts fit in Corning 50mL plastic centrifuge tubes

…and other applications Available at 24 well, 48 well, 96 well format; U-bottom or V-bottom, Square well or Round well Temperature range from -80°C to +121°C; autoclavable Certified Rnase, Dnase & Pyrogen Free Maximum centrifuge speed 4000 x g Withstands Organic Solvents…

A variety of replacement rotors and accessories are available for Eppendorf centrifuge Models 5418 and 5424.

…most plate centrifuges and accepts skirted, non-skirted and all standard PCR plates. Quickly spins down droplets and condensation. Use before and after thermal cycling to improve PCR yield. Support: 8 x 0.2ml PCR strips 12 x 0.2ml PCR strips 0.2ml PCR tubes 24 well or 48 well PCR…

…and purified viral particles in 2 - 3 hours, in contrast to the 12 - 48 hours typically required for traditional CsCl gradient centrifugation. Ready-to-use 0.45 µm filters, Sartobind filter units, centrifuge concentrators, and buffers make the AdEasy virus purification procedure…

…400 mL bottles. Rotor A-4-81 with 4 swing-buckets for 7x 50ml conical tubes, for Eppendorf Centrifuges 5810/5810R. Maximum speed 3,250xg (4,000rpm). Rotor A-4-81 without buckets. For use in Eppendorf Centrifuge 5810/5810R. Plate bucket for rotor A-4-81; for Eppendorf Centrifuges 5810/5810R.

Accommodates 24 x spin columns or 24 x 1.5/2.0 ml tubes Speed up to 19,090 x g Unique extra high rim design supports open tube lids during centrifugation - lids won't tear off Aerosol-tight for use with hazardous samples

Perfect for high-speed protocols - up to 30,130 x g (17,500 rpm) Accommodates 24 x 1.5/2.0 ml Eppendorf tubes Aerosol-tight lid for use with hazardous materials PTFE-coated for high chemical resistance and easy cleaning

…grip the tops. A powerful and quiet brushless motor accelerates to a maximum speed of 13,330 rpm/ 16,000 x g. The last run is stored in memory, allowing repeated centrifuging without resetting parameters. Simple controls and integrated timer further enhance convenience. Available in five colors.

…and other applications Available at 24 well, 48 well, 96 well format; U-bottom or V-bottom, Square well or round well. Temperature range from -80°C to +121°C; autoclavable Certified Rnase, Dnase & Pyrogen Free Maximum centrifuge speed 4000 x g Withstands Organic Solvents…

…and other applications Available at 24 well, 48 well, 96 well format; U-bottom or V-bottom, Square well or round well. Temperature range from -80°C to +121°C; autoclavable Certified Rnase, Dnase & Pyrogen Free Maximum centrifuge speed 4000 x g Withstands Organic Solvents…

…and other applications Available at 24 well, 48 well, 96 well format; U-bottom or V-bottom, Square well or round well. Temperature range from -80°C to +121°C; autoclavable Certified Rnase, Dnase & Pyrogen Free Maximum centrifuge speed 4000 x g Withstands Organic Solvents…

No special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…

…prevent optical cross talk in light emitting assays. Conforms to ANSI/SBS microplate standard. Guaranteed for use with robotic handlers and centrifuge carriers. Whatman offers a wide range of UNIPLATE microplates including various well profiles, well volumes, and well densities, in…