Cell Culture Flask With Vent Cap

Nest cell culture flasks are available in cell growth areas ranging from 25cm2 to 225cm2. Tissue culture treated or non-treated flasks available with a vent cap or plug seal cap to meet your needs. Vent caps with 0.22 um hydrophobic filters for gas exchange. Angled neck for easy access …

…plug seal caps (no membrane) and vented caps (with breathable membrane) are available Clear lot number for batch traceability Non-Pyrogenic, DNase/RNase-FREE Denville® cell culture flasks have an even surface, and Vacuum Plasma tissue culture treatment ensures maximum, uniform cell…

…with a plain or baffled bottom for benchtop or shaker table use. Made of blue HDPE for easy identification Hydrophobic 0.2 µm PTFE membrane is heat welded into place for effective sealing Vented closures provide sterile gas exchange for shaker and suspension cell culture.…

…Shaker Flasks are molded from virgin, optically clear, non-leaching polycarbonate resin that complies with stringent FDA and USP requirements. Our flasks can be used for cell cultures, microbial cultures, media preparation and storage. Flasks are available in 1liter and 2 liter sizes with flat…

…cell cultures over the weekend!) Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment Stable base enables filling with flask standing upright Convenient re-sealable bag is a practical alternative to folding and taping opened bags Vent caps…

…pouring. When the vented screw cap is tightened to the end position, the closed tissue culture flask is liquid and gas tight. By simply unscrewing the cap one quarter of a turn, the flask is in the "VENT" position, with the inside of the flask being aerated through a…

…prmotes enhanced cell attachment. CellBIND cell culture surface may eliminate the need to use poly-D-lysine or other coatings to improve cell attachment. Three styles of caps are available: Plug Seal (Plug), Phenolic-Style (PS) and Vent Cap (Vent). Vent caps contain a 0.2 µm…

…at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached. Please Note: Glass Shake and Fernbach flasks are not designed for use with a SOLID screw cap for culture of anaerobic microorganisms. (Pressure resistant bottles, flasks or tubes are recommended).

…150 cm 2 flask is shorter in height and has a wider diameter opening than its rectangular counterpart, allowing for better access with cell scrapers and serological pipets. Three styles of caps are available: Plug Seal (Plug), Phenolic-Style (PS) and Vent Cap (Vent). Vent caps contain a…

…application and cell line. These wide-mouth flasks are available in 2L, 3L, and 5L sizes with either a baffled or plain bottom. The flasks are constructed of USP Class VI PETG for excellent optical clarity and mechanical strength. Molded graduations are standard, and threaded vent caps provide…

Helps adapt cells to reduced serum or serum-free conditions 25, 75 or 150 cm 2 sizes 10, 60 or 210 mL maximum working volumes Rectangular canted neck cell culture flasks have been treated with a patented Corning® CellBIND surface treatment for optimal cell attachment.…

…threaded cap Thomas No. 1234H49 is a universal cap with a vented overcap designed to fit pre-existing filling systems for other product brands. Vented overcap has 1.0 µm PTFE membrane sealed into the peelable foil cover. 1234H51 is a 33 mm filling cap featuring a Male MPC End Cap with a…

Cell culture flasks with surface areas from 25-175 cm² Filter caps or vent/close caps available for good gas exchange Extra caps included in every carton Short, wide neck for easy access Individually leak tested Excellent optical quality Nunclon™? certified

The Corning 5L Erlenmeyer flask is designed to help scale-up suspension culture with space efficiency in mind. The flasks are sterile and ready-to-use, ideal for shaker culture applications, and storage. Closed cell culture systems help reduce the risk of adventitious contamination during drug…

Nest cell culture flasks are available in cell growth areas ranging from 25cm2 to 225cm2. Tissue culture treated or non-treated flasks available with a vent cap or plug seal cap to meet your needs. Vent caps with 0.22 um hydrophobic filters for gas exchange. Angled neck for easy access …

…products. Suspension culture flasks are non-treated. Surfaces are flat and free from striation to provide improved transparency. Flasks are available in four different sizes; 25ml (12.5cm 2 ), 50ml (25cm 2 ), 250ml (75cm 2 ) and 600ml (182cm 2 ). Flasks are provided with vent caps that contain…

…with a PTFE 0.22 µm membrane. Ideal for aerobic/anaerobic cell culture. Septum Cap Serves as closure for flasks and media bottles. This cap comes in standard blue polypropelene with gray butyl rubber. Ideal for injectibles, especially pathogenic media. DuoSeptum Cap This cap…

With blue, polyethylene, vent/close, screw cap Sterile Disposable flasks similar to 9381T30 series, but with canted neck for easy access to culture. Caps permit vented incubation when partially tightened. 9381V40 Flask packaged in sleeves of 20, with cap.

…caps have a 0.22µm (PTFE) hydrophobic membrane to allow sterile gas exchange while preventing contamination. Since these caps are vented, the flasks can be autoclaved with the cap attached.Please Note: Glass Shake and Fernbach flasks are not designed for use with a SOLID screw cap for culture…

…Celstir design is the standard flask type for cell culture. Celstir flasks feature adjustable blade impeller for increased aeration and dimpled bottom to prevent the accumulation of cells under the impeller (dimpled bottom on 125 mL size and larger). When used with the Micro-Stir®, which can…

…Standards Single use only. Flasks cannot be autoclaved or resterilized with alcohol. Any attempt to do so will result in degradation of the materials Optional Vented Caps (Cat. No 3567) and Aseptic Transfer Caps (Cat. No. 3562) are available Aseptic Transfer Caps are sterile (10-6 SAL),…

…larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate cell culture controllers at…

Replacement Caps for Tissue Culture Flasks Sterilized by gamma radiation Of clear polystyrene, treated for improved cell attachment and growth Of high optical clarity and are individually leak-tested 9381T30 Flask has black, rim-seal, screw cap of melamine resin with PVC liner. …

…is treated for improved cell growth. Construction permits stacking flat. Flask thickness 50 mm; neck i.d. 26 mm. 9381L35 Flask includes 2-position plug seal screw cap which permits vented incubation when partially tightened; 9381L45 Flask includes phenolic screw cap with rubber liner. Packaged in…

…for improved cell attachment and growth, sonically welded together to form sealed culture chambers sharing common vent and fill holes. Each chamber has a flat growth surface of 6,320 cm 2 . Unit design allows all chambers to be filled with exact volumes of media. Channel ports are fitted with caps…

Flasks are designed for culturing organisms that require a large surface area to volume ratio. Available with a plain 59mm ID neck, 38mm OD Delong style neck or GL-45 screw neck supplied with a vented cap.

…with screw neck and polypropylene cap Teflon®-faced cap, silicon rubber liner Internal Teflon-covered impeller assembly permits gentle stirring of cell suspension cultures in sealed flasks by placing on a magnetic stirrer. Nylon bearing sleeve attached to the underside of cap supports…

…immobilizes the impeller during handling or decanting to prevent damage to cells or microcarriers. Sizes 500 mL and larger can accommodate the Wheaton Vented Cap (Cat. No. W240751). Designed for microcarrier cultures with a magnetic stirrer Gentle stirring action provided by a bulb-shaped…

Flasks are designed for culturing organisms that require a large surface area to volume ratio. Flask has 3 baffles on lower outside edge to help oxygen transfer to the culture medium. Available with a plain 59mm ID neck, 38mm OD Delong style neck or GL-45 screw neck supplied with a vented cap.

2800mL flasks are designed for culturing organisms that require a large surface area to volume ratio. Available with 70mm screw neck with a solid or vented cap.

…culture area Ergonomic closure, open or close in 1/3 turn Ideal for culturing finicky cells that do not bind to regular cell culture treated surface Sterile and non-pyrogenic Filter Caps: Vent/close and filter caps are available Filter caps are fitted with a…