Capillaries Glass

Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

Borosilicate Glass In lengths of 4 ft. Cases contain 15 lbs. Number of lengths stated per case is approximate 6.5 ±0.4 and 7.5±0.4 mm size tubing are each offered in two bore sizes as shown in table

These glass capillary tubes are designed for both safe blood collection as well as accurate micro-hematocrit determinations. Precision molded, they provide excellent sample retention during centrifugation. In addition, the tubes fill rapidly without affecting specimen integrity. The tubes are…

These Pyrex® melting point tubes are made from No. 7800 glass. The 100 mm sizes are available with both ends open while the 90 mm comes with one end open and one end closed. All tubes have a 0.2-0.25 mm wall range.

…transfer liquids in micro quantities. They are precision-bore glass capillary tubes cut to predetermined lengths so that fill volumes are constant and precise. Microcaps are inexpensive and disposable. Using a Microcap is simple. Capillary action draws the fluid into the tube and a squeeze of…

…is 1.2 to 1.4 mm i.d. x 1.5 to 1.8 mm o.d.; of N-51 A glass. Packaged in vials of 100. KIMAX®-51 brand with Sealed End (6148L07 and L23) Similar to 6418K07 and K23, but one end is sealed Of N-51A borosilicate glass Length is 90 mm; packaged in vials of 100 Packaging…

100% Plastic microhematocrit capillary tubes Plain untreated Globe Scientific's plastic micro hematocrit capillary tubes are completely unbreakable. They eliminate the risk of injury and contamination associated with glass tubes due to breakage. The tubes are packaged 100 per vial, 10…

…clay Heparinized capillary tubes are designed to prevent blood clotting Ammonium heparin does not interfere with sodium identification Tubes are manufactured from 90 expansion soda lime glass conforming to USP Type III requirements Available in borosilicate glass as a special order

… Overall volumetric accuracy of ±1% (at full volume) Repeat Kit available for 1000μL unit Precision molded plastic bores on Model 390 Model 105 will deliver 1 to 5 μL Borosilicate glass bores with stainless steel plungers, (PTFE tips on all plungers 25 μL or larger)

…for GC capillary applications, LC tubing, and other micro tubing requirements. It is also well suited for use in bioanalytical and high temperature GC applications. Avoid use with hydrofluoric or phosphoric acids, alkalis, and alkali-metalized compounds as dissolution of silica glass and surface…

…identification ·          Tubes are manufactured from 90 expansion soda lime glass conforming to USP Type III requirements ·          Available in borosilicate glass as a special order

For use with thermometers calibrated for 76 mm immersion Borosilicate glass, thin wall, with one end sealed Length is 110 mm Inside diameter 0.9 to 1.1 mm   and wall thickness approximately 0.25 mm; complies with requirements given in the United States Pharmacopoeia.

Econo-Pak Economy priced Plain or cotton-plugged Ungraduated with long capillary tips approximately 1 mm id Body of pipet is approximately 7 to 7.5 mm outside diameter with small constriction approximately 30 mm from the upper end to retain a cotton plug. Tip length of all 5…

… Gold plated seal kit, includes washer Replacement for 18740-20885, 3 each Liner, split, straight, glass wool, non-deactivated, 4 each Liner, splitless, single-taper, glass wool, deactivated, 2 each Non-Stick Fluorocarbon O-ring, 10/pk Liner, direct, 2mm ID, deactivated …

Borosilicate glass replacement capillary tubes contain samples to be analyzed in the Digital Mel-Temp 3.0 melting point apparatus. Borosilicate glass is chemically inert and resists temperature changes. The tubes come in a package of 100.

…identification ·          Tubes are manufactured from 90 expansion soda lime glass conforming to USP Type III requirements ·          Available in borosilicate glass as a special order

These FUNGILAB glass capillary viscometers allow to determine viscosities using ASTM and DIN testing methods. All capillary viscometers are supplied with the cali- bration certificate issued in accordance with the conditions of accreditation granted by a National Metrological Register which has…

…measuring viscosity at low temperatures using glass capillary viscometers Conforms to ASTM D 445 for low temperature viscometry Peltier cell for thermoelectric cooling Fan-cooled, high-density heat sinks Holds two glass capillary viscometers A selector switch on the front…

BS/IP/RF U-Tube Reverse Flow glass capillary viscometers are ideal for the measurement of opaque liquids within a range of 0.6-300,000 cSt. Includes a calibration certificate with Constant values at 40°C and 100°C. Viscometers conform to ASTM D445, D446, ISO 3104, ISO 3105 and UNE 400313 standards.…

These Capillary Gas Delivery Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.

BS/U Tube glass capillary viscometers are ideal for measuring the kinematic viscosity of transparent Newtonian fluids within a range of 0.9-10,000 cSt. Includes a calibration certificate with a Constant values at 40°C and 100°C and a precision of ±0.2%. Viscometers conform to ASTM D445, D446, ISO…

…high-quality, temperature controlled bath for glass capillary viscometers. The Thermocap provides universal support for Cannon-Fenske, Ubbelodhe, Ostwald, BS/U-Tube, Cannon-Manning Semimicro, Ubbelhode BS/IP/SL, BS/IP/SL (S), and BS/IP/MSL capillary viscometers—all of which conform to ISO 3105, ASTM…

…highly reproducible taper angles throughout the length of the Press-fit insuring an excellent seal. Now the only choice you have to make is between a Glass Union for standard applications, and Fused Silica Unions or Deactivated Quartz Unions for applications demanding maximum inertness. The 2.5 mm…