Cannon Viscometer

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume:10 mL. Requires liquid bath depth of 230 mm (9”). Includes certificate of…

…254 mm; must be submerged to approximately 220 mm. Each viscometer is individually boxed. Calibrated viscometers include a certificate of calibration and instruction sheet. Viscometers have the serial number and size printed on the viscometer and on the outside of the box. Holder is not supplied.…

…457 mm (18") Cylindrical glass vessel is deeper than glass vessel of CT-500, allowing the use of longer viscometers such as the Cannon- Ubbelohde Four-Bulb Shear Dilution Viscometer (ten-fold dilution type). Otherwise identical to Model CT-500. Power requirements: 9726A17 is 115 to 120 V,…

…400313 Cannon-Fenske Routine Viscometers quickly and easily measure the viscosities of transparent Newtonian liquids. Sample volume: aprox. 7 ml. Precision: ±0.2%. With constant value indication at +40ºC and +100ºC. All capillary viscometers are supplied with the calibration…

Fungilab's Thermocap is a high-quality, temperature controlled bath for glass capillary viscometers. The Thermocap provides universal support for Cannon-Fenske, Ubbelodhe, Ostwald, BS/U-Tube, Cannon-Manning Semimicro, Ubbelhode BS/IP/SL, BS/IP/SL (S), and BS/IP/MSL capillary…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Minimum sample volume: 11 mL. Requires liquid bath depth of 250 mm (10”).…

…parts Easy-to-use graphical touch screen Small sample volume: <0.5 mL Rapid automated analysis: <3 minutes The Cannon SimpleVIS™ Portable Viscometer offers the industry a new tool for quick and reliable kinematic viscosity measurement. The SimpleVIS™ provides exceptional…

…are incorporated to extend viscosity range of viscometer. Calibrated with precision of ±0.5%. Minimum sample volume: 6 mL . Requires liquid bath depth of 180 mm (7.1”). Pressure regulator and vacuum manifold for use with these viscometers are listed separately under 9726T20 and V10.…

CANNON Low Temperature Viscosity Standards verify viscometer performance at sub-zero temperatures. These standards are applicable to SAE Specification J300 as well as a variety of ASTM Methods including: ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfi eld…

Calibrated viscometers For measuring viscosity of highly viscous materials such as asphalt cement at 60°C (140°F) Meets ASTM D 2171 Applicable to materials with viscosity range of 42 to 5,800,000 poises With graduated capillary to extend viscosity range of viscometer Minimum sample size: 3…

…viscosity of small samples of transparent Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Viscometer constant is same at all temperatures Initial sample can be diluted to as much as 20 mL for intrinsic viscosity determinations Minimum sample…

Calibrated viscometers For measuring viscosity of asphalt at 60°C (140°F) Meets ASTM Standard D 2171 Applicable to materials with viscosity range of 42 to 200,000 poises. Two-piece design, with sample reservoir and calibrated capillary Vacuum of 300 mm Hg must be applied to top of capillary…

…ASTM D2515, ISO 3104-3105 and UNE 400313 Cannon-Fenske Opaque Viscometers (reverse flow type) are used for dark Newtonian liquids; especially suitable for liquids so dark in colour that cannot be seen in a Cannon-Fenske routine viscometer. Also used to study shearing stress and shearing rate. Sample…

Four Bulb Shear Dilution- Five-fold Dilution Type, Cannon CUSDC-11 Series For measurement of intrinsic viscosities extrapolated to zero shear rate Provides five-fold range of shear rates Design gives extra mechanical strength Negligible kinetic energy correction Precision:…

All Cannon viscometer holders are designed to fit holes 51 mm (2 in.) in diameter. Rubber holders are made of neoprene rubber.  Plastic holders hold the viscometer firmly with a spring clip.  Metal holders are constructed of chrome-plated machined brass.  A handle permits…

Similar to Cannon-Manning Vacuum (CMV, 9724-H50) series, but with graduated capillary instead of two timing bulbs. Provided with certificate of calibration and instruction sheet. Viscosity range, poise: 2400 - 52000 Approx. constant poise/second at 300mm Hg Bulb B: 128 Approx.…