Bushing Adapter

Compare Tool

Select up to 3 products

Bushing Adapter
1 - 32 of 73
Sort
View
Show
  • Synthware Bushing Adapters

    Kemtech America

    Synthware bushing adapters allow for compact assemblies of dissimilar standard taper joints.

  • Adapter, Bushing

    Ace Glass

    Bushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.

  • Adapter, Bushing

    Ace Glass

    Bushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.

  • Adapters, Bushing

    Chemglass

    Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.

  • Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus. Similar to CG-1016, but made entirely of PTFE.

  • PTFE Adapter

    Ace Glass

    PTFE adapter from one standard taper joint size to another.

  • Stainless Steel Tubular Adapter

    Sonics & Materials

    The adapter Part No. 830-00014 screws onto the special probe Part No. 630-0217 at the nodal point. The glass chamberslides onto the adapter and is secured in place as the bushing is screwed into the chamber compressing the O-ring. Movingthe glass chamber up or down on the adapter allows the portion…

  • This precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…

  • This bushing adapter has a male Ace-Thred connection at bottom and a female NPT thread drilled into the center of the top of the bushing. The top FNPT connection matches male Swagelok fittings and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is…

  • This conical 4" neck has three outer joints in line, plus a 14/35 outer joint which takes a 5021 Bushing Adapter to be used with ACE 8315 10/30 Thermometer. The 6500 Thermometer Well can also used with this head, when using a standard thermometer. For

  • Stopcock adapter, inner joint bottom, #15 top, stopcock side arm with PTFE plug and hose connection end. With a #15 nylon bushing, 7506-06, adapter can accomodate 12.5 to 14mm electrodes, finger consensers, etc. Suitable for vacuum work. See 7855-716 f

  • Distilling Heads

    Chemglass

    Simple distillation head with a condenser sealed to the adapter at a 75º angle. The top outer joint on the 14/20 size can be converted to a 10/18 thermometer joint by using a CG-1016-27 bushing adapter. The sidearm is sealed at a height for use with a 1” immersion thermometer. The 24/40…

  • …tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, then connect adapter via 7506 bushing to inlet and outlet of trap. Serrated end of adapter has six rings;…

  • …vessels. Two-piece adapter features a #7 Ace-Thred at top of vacuum adapter that, with Nylon bushing and O-Ring, forms a compression seal with condenser tube, bottom 14/10 inner joint, and side hose connection. Complete item consists of vacuum adapter with Nylon bushing and FETFE O-Ring, and…

  • General Description Threaded nylon bushing with FETFE® O-ring. Legal Information Ace-Thred is a trademark of Ace Glass, Inc.; FETFE is a registered trademark of Ace Glass, Inc.

  • …inner bearing, compression seal nylon bushing and glass standard taper adapter allows for moderate misalignment of stir motor and the bearing cannot sieze the shaft. For use with 8077 & 8078 19mm od precision ground shafts and 8079 PTFE covered shafts. See 7855-734 for replacement bushing o-ring.

  • …place of 35/20 joints, for grease free connection. Internally threaded connector & Nylon bushing make a pressure-tight, O-Ring compression seal with glass stem on reservoir & flow adapter. Bushing replaces joint clamp. Column & reservoir, only, are Epoxy Coated. Column available with or…

  • …sample size as small as 10ml. Two 14/20 side ports. Complete unit, code -19, includes a #25 Ace-Thred bushing for our 9852-41 slide adapter (not included). Order separately the 9852-41 slide adapter, 9814-25 horn, 9818-17 microtip extender for 10ml samples or 9816-06 extender for up to 50ml samples.

  • …sample size as small as 3ml. Two 14/20 side ports. Complete unit, code -25, includes a #25 Ace-Thred bushing for our 9852-41 slide adapter (not included). Order separately the 9852-41 slide adapter, 9814-25 horn, 9818-17 microtip extender for 3ml samples or 9816-06 extender for up to 10ml samples.

  • …Kits include selections of rotary scraper tools only. Motor Kits include everything you need to get started: rotary scraper tools, glass bushing adapters, motors and two 12V batteries. NOTE: Chem-spin tools must only be used with the correct corresponding flask size/capacity. Caution must…

  • Ace-Thred to standard taper adapter designed specifically for securing a thermocouple via a nylon bushing and PTFE ferrule.

  • VitroKit

    DWK Life Sciences (Wheaton)

    …to seize and do not require lubrication Kit contains following assortment: Claisen adapter; connecting adapter; thermometer adapter with Neoprene bushing; vacuum distilling adapter; 200 mm West condenser; 200 mm distilling column; 125 mL separatory funnel with Teflon ® stopcock…

  • …cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41 slide adapter (not included). 250ml capacity with hose connections for 3/8in ID tubing.

  • …cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41 slide adapter (not included). 10ml to 50ml capacity with hose connections for 3/8in ID tubing.

  • …cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41 slide adapter (not included). 3ml to 10ml capacity with hose connections for 3/8in ID tubing.

  • …of inner Trubore bearing, Nylon bushing with O-Ring, and threaded adapter. Unique design eliminates costly replacement since inner bearing will spin if shaft binds or will self-align at O-Ring seal in the event the motor is slightly cocked. Inner bearing and bushing can be used with any joint size.…

  • …Column, unit is designed to recover solvent normally lost during Kuderna-Danish Evaporative Concentrations. PTFE stopcock (1:5, 2mm bore) provides option for total reflux or takeoff. #7 Ace-Thred on side arm accepts tubing 6 - 7mm O.D. 5029-10 Nylon bushing and FETFE O-Ring supplied with adapter.

  • …of a Pasteur pipet. Complete item consists of cold finger condenser and multi- purpose vacuum adapter with #7 Ace-Thred that makes compression O-Ring seal with cold finger and allows for vertical adjustment. Threaded adapter supplied with Nylon bushing and FETFE O-Ring. Hose connection is size A.

  • Microscale, vacuum adapter with vertically adjustable Hirsch filter funnel that is suitable for use with all Microscale flasks and vials with 14/10 joints. Two-piece adapter features a #7 Ace-Thred at top with a Nylon bushing and O-Ring that forms a compression seal with funnel stem, bottom joint,…

  • …used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples into a conventional round bottom flask. Joint sizes other than 24/40 are available upon request. Adapter is supplied complete with one CG-362 open top bushing of the listed size and Viton o-ring.

  • With #7 Ace-Thred for use with 5029 Nylon bushing and adjustable length thermometer. Supplied with 5029-10 Nylon bushing and FETFE O-Ring.

  • Straight adapter with the addition of a 105 degree side arm. Outer joint or ace-thred top, bottom inner joint, outer joint side. Order 7506-06 bushing for #15 ace-thred, 7506-10 for #25 ace-thred.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.