Compare Tool

Select up to 3 products

1 - 32 of 208
  • For all sizes of burets, chromatography columns and any other similarly sized tubes Made of unbleached white animal bristle with fan-shaped tufted end on galvanized iron wire 1928F65 and 1928F68 brushes are 760 mm in length; 1928F75 through 1928F88 brushes are 915 mm in length.

  • …construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height adjustments, recompress mechanism and slide buret up or down and…

  • Buret Kit

    Vee Gee Scientific

    …Interfaces with the VEE GEE Class A Buret Series & Buret Clamp. The VEE GEE white finish double buret clamp is made of aluminum, die casted, and painted white. Black rubber sleeves allow for firm griping of burets. The clamps are adjustable and hold two burets from micro to 100mL sizes. The…

  • Buret Clamps

    United Scientific Supplies

    Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

  • Glass Buret

    Vee Gee Scientific

    VEE GEE Scientific Class A Burets w/ PFTE Stopcocks meet ASTM E-287 Class A Specifications. Made from precision, uniform Schott DURAN® true-bore tubing to ensure the stipulated capacity tolerances. These burets (also known as burettes) feature durable, permanent markings, fine, sharp lines, and…

  • Top Buret


    …display readings on both models range from 0.01 ml to 999.9 ml.. This bottle top buret is extremely sturdy, and its user friendly display and control features provide simple, fatigue-free operation. Top Buret features : Continuous, pulse-free dispensing technique for rapid titration …

  • Ammonia Dissociation Buret

    SP Wilmad-LabGlass

    …in 1% subdivisions, this borosilicate glass buret is used to determine the degree of dissociation of ammonia during the nitriding of steel alloys. Buret is 100mL and reads the amount of ammonia absorbed. Stopcocks are glass and a Standard Taper 14/20 joint connects the filling funnel with the buret.

  • KIMAX Measuring Gas Buret

    DWK Life Sciences (Kimble)

    Without stopcock 5579M10 Buret is graduated from 0.5 to 50 mL in 0.1 mL divisions, tolerance ±0.10 mL.

  • Buret Retort Stand

    Vee Gee Scientific

    …Stand provides an excellent replacement for metal ones. Even the metallic rod has a polypropylene covering making it corrosion resistant. The rod can be threaded into the heavy case giving way to a perfectly stable retort stand. Interfaces with the VEE GEE Class A Buret Series & Buret Clamps.

  • Buret Filler Kit

    Thermo Scientific Nalgene

    …25 or 50 mL glass or plastic burets Nalge 3645 Self-zeroing Kit includes a 1,000 mL LDPE squeeze-bottle; 1.2 meters of 1/8” bore clear PVC tubing; polypropylene fill-tube; polypropylene adapter plug which is reversible to fit either size buret; and two size 63 polypropylene…

  • Sibata Glass Buret

    Vee Gee Scientific

    Designed "to deliver" the Glass Buret accurately dispenses liquid and meets ASTM E-287 Class A specifications.

  • Glass reservoir and buret with PTFE stopcock create an easy-to-use workstation for standard solutions. Subdivisions of 1.0 mL and 0.1 mL.

  • Buret No Stopcock 50ml

    DWK Life Sciences (Kimble)

    Class B straight bore buret barrel only Furnished without stopcock Lubri-Flo® stopcock barrel 50 mL

  • These 50mL PYREX® burets have an automatic zeroing device and dual Rotaflo® stopcocks for easy controlled filling. Greaseless Rotaflo® stopcocks allow smoother control and help eliminate titrating errors

  • Buret 250 ml


    …PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls, these burets

  • Buret 10 ml


    …Standard Taper stopcocks turn freely, yet give positive control For replacement PYREX® stopcocks, see No. 7680 For replacement retaining clips, see No. 7280 The capacity tolerance on these burets is established by ASTM E-1189 and is calibrated in accordance with ASTM E-542.

  • Buret Titration Right Hand 50ml

    DWK Life Sciences (Kimble)

    KIMAX® buret used in electrometric titration assemblies. Stopcock is set at a 55 degree angle to the center of the graduated scale Offset dispensing tip Burets have funnel tops Durable black ceramic enamel scale Manufactured from 33 expansion, low extractable borosilicate…

  • KIMAX Cma Type No. 1 Buret

    DWK Life Sciences (Kimble)

    With funnel top and PTFE stopcock plug with 2 mm diagonal bore Capacity 50 mL in 1/10 mL divisions; limit of error 0.05 mL Each buret is serial numbered and supplied with a certificate of graduation accuracy.

  • Educational-Grade Burets

    DWK Life Sciences (Kimble)

    …supplied with a PTFE compression fit stopcock assembly and a precision ground tip 1983J70, 25mL buret has a permanent brown stained scale KIM-KAP™ dust cap is included Funnel fill style buret Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type…

  • Combines high precision with low cost 0.5% accuracy; vernier type micrometer Liquid comes in contact with only glass and Teflon ® Viton O-ring gives a vacuum-tight seal All other plastic parts of polypropylene; instrument may be autoclaved Fills and delivers liquid with micrometer control …

  • KIMAX buret with a PTFE plug. RAY-SORB processed to protect liquids sensitive to light of shorter wave lengths. KIM-KAP dust cap is included White ceramic enamel scale. Subdivisions: 0.1mL Capacity: 50mL Replacement stopcock is 41500F-2 (8682B22).

  • Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…

  • Buret Auto 3Way w / PTFE Stopcock 100ml

    DWK Life Sciences (Kimble)

  • Dissolved oxygen 300-mL sample contains: Alkaline Iodide-Azide Powder Pillows, Manganous Sulfate Powder Pillows, Sodium Thiosulfate Standard Solution (0.025 N), Starch Indicator, and Sulfamic Acid Powder Pillows

  • …overflow is returned to reservoir 2002A01 (LaMotte 0847) and A06 (LaMotte 0996) burets include 50 mL plastic squeeze bottle reservoir with screw cap to hold buret. 2002A03 (LaMotte 0427) and A09 (LaMotte 0997) burets include 24 mm screw cap, but do not include reservoir. Can be furnished with 28…

  • Automatic self-zeroing glass buret ensures non-contamination Easy-to-read blue graduations against a white background 10 mL buret readable to 0.05 mL; other burets readable to 0.1 mL Delivery end fitted into plastic push-button stopcock permitting drop-by-drop delivery Small screw…

  • Automatic Zero Reservoir Burets

    SP Wilmad-LabGlass

    …20 Burets provide 7 inches clearance for titration vessel and 2001G50 Buret provides 8 7/8 inch clearance 2001F10 Buret has a 500 mL reservoir with No. 9 stopper; 2001F15 Buret has a 500 mL reservoir with No. 8 stopper; 2001F20 Buret has a 1,000 mL reservoir with No. 9 stopper; 2001G50 Buret is…

  • Serialized Colored scale Teflon® stopcock plug The capacity tolerance on Class A PYREX burets is established by ASTM E-287 and is calibrated in accordance with ASTM E-542 and D-511. Each buret is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to…

  • PYREX® 25mL Buret with White Enamel Markings, with Dual Rotaflo® Stopcocks

  • … Supplied with plastic dust cap Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taperstopcock gives precise control. The capacity tolerance on these burets is established by ASTM E 287 and they are calibrated in accordance with ASTM E 542.

  • …with a 2mm bore stopcock plug. For replacement PYREX® stopcocks, see No. 7680.  For replacement retaining clips, see No. 7280. The capacity tolerance on these burets is established by ASTM E-287 and is calibrated in accordance with ASTM E542. Each buret is supplied with a dust cover.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.