Buret

Compare Tool

Select up to 3 products

Buret
1 - 32 of 130
Sort
View
Show
  • For all sizes of burets, chromatography columns and any other similarly sized tubes Made of unbleached white animal bristle with fan-shaped tufted end on galvanized iron wire 1928F65 and 1928F68 brushes are 760 mm in length; 1928F75 through 1928F88 brushes are 915 mm in length.

  • …construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height adjustments, recompress mechanism and slide buret up or down and…

  • Buret Clamps

    United Scientific Supplies

    Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

  • Buret No Stopcock 50ml

    DWK Life Sciences (Kimble)

    Class B straight bore buret barrel only Furnished without stopcock Lubri-Flo® stopcock barrel 50 mL

  • Top Buret

    Eppendorf

    …display readings on both models range from 0.01 ml to 999.9 ml.. This bottle top buret is extremely sturdy, and its user friendly display and control features provide simple, fatigue-free operation. Top Buret features : Continuous, pulse-free dispensing technique for rapid titration …

  • Product Dimensions (l x w x h) : 8.5x1.599x5.187in These spring loaded polypropylene clamps allow a clear  view of the graduations over the entire length of  a burette. The arms are fitted with rubber grips  to prevent slipping and the central boss features  of a conical…

  • Ammonia Dissociation Buret

    Wilmad-LabGlass - SP Scienceware

    …in 1% subdivisions, this borosilicate glass buret is used to determine the degree of dissociation of ammonia during the nitriding of steel alloys. Buret is 100mL and reads the amount of ammonia absorbed. Stopcocks are glass and a Standard Taper 14/20 joint connects the filling funnel with the buret.

  • KIMAX Measuring Gas Buret

    DWK Life Sciences (Kimble)

    Without stopcock 5579M10 Buret is graduated from 0.5 to 50 mL in 0.1 mL divisions, tolerance ±0.10 mL.

  • Buret Titration Right Hand 50ml

    DWK Life Sciences (Kimble)

    KIMAX® buret used in electrometric titration assemblies. Stopcock is set at a 55 degree angle to the center of the graduated scale Offset dispensing tip Burets have funnel tops Durable black ceramic enamel scale Manufactured from 33 expansion, low extractable borosilicate…

  • Buret Filler Kit

    Thermo Scientific Nalgene

    …25 or 50 mL glass or plastic burets Nalge 3645 Self-zeroing Kit includes a 1,000 mL LDPE squeeze-bottle; 1.2 meters of 1/8” bore clear PVC tubing; polypropylene fill-tube; polypropylene adapter plug which is reversible to fit either size buret; and two size 63 polypropylene…

  • Educational-Grade Burets

    DWK Life Sciences (Kimble)

    …supplied with a PTFE compression fit stopcock assembly and a precision ground tip 1983J70, 25mL buret has a permanent brown stained scale KIM-KAP™ dust cap is included Funnel fill style buret Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type…

  • Glass reservoir and buret with PTFE stopcock create an easy-to-use workstation for standard solutions. Subdivisions of 1.0 mL and 0.1 mL.

  • Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…

  • Bel-Art Automatic Burets

    Bel-Art - SP Scienceware

    Automatic self-zeroing glass buret ensures non-contamination Easy-to-read blue graduations against a white background 10 mL buret readable to 0.05 mL; other burets readable to 0.1 mL Delivery end fitted into plastic push-button stopcock permitting drop-by-drop delivery Small screw…

  • These 50mL PYREX® burets have an automatic zeroing device and dual Rotaflo® stopcocks for easy controlled filling. Greaseless Rotaflo® stopcocks allow smoother control and help eliminate titrating errors

  • Buret 250 ml

    Corning

    …PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls, these burets

  • … Supplied with plastic dust cap Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taperstopcock gives precise control. The capacity tolerance on these burets is established by ASTM E 287 and they are calibrated in accordance with ASTM E 542.

  • Buret 10 ml

    Corning

    …Standard Taper stopcocks turn freely, yet give positive control For replacement PYREX® stopcocks, see No. 7680 For replacement retaining clips, see No. 7280 The capacity tolerance on these burets is established by ASTM E-1189 and is calibrated in accordance with ASTM E-542.

  • …‘T’ connector; clamps do not obstruct scale. 8847T34 double buret clamp is similar to 8847T32, but with two single buret clamps mounted 4” (100 mm) apart on crossbar to simultaneously hold two burets, tubes, rods, thermometers, etc. 8847T36 clamp is similar to 8847T32 but for…

  • Class B Accuracy Acrylic Burets

    Thermo Scientific Nalgene

    Safer and more break-resistant than glass Clear plastic with black markings, individually calibrated Polymethylpentene stopcock and tip; stopcock plug Teflon ® , 2 mm bore Resistant to dilute acids and bases, except hydrofluoric acid and ammonium hydroxide; not for use with alcohol…

  • KIMAX Straight-Bore Class B Burets

    DWK Life Sciences (Kimble)

    With PTFE stopcock Includes plastic KIM-KAP® dust cap Scale is durable black ceramic enamel. Plain top. ASTM E287, Class B.

  • KIMAX Cma Type No. 1 Buret

    DWK Life Sciences (Kimble)

    With funnel top and PTFE stopcock plug with 2 mm diagonal bore Capacity 50 mL in 1/10 mL divisions; limit of error 0.05 mL Each buret is serial numbered and supplied with a certificate of graduation accuracy.

  • Scale is durable white ceramic enamel Plain top 1988K10 has 1 mL subdivisions and a tolerance of ±2.0 mL. Dimensions: 36 mm o.d. x 544 mm L. 1988K20 has 5 mL subdivisions and a tolerance of 2.5 mL. Dimensions: 43 mm o.d. x 646 mm L. 1988K30 has 10 mL subdivisions and a tolerance of 10 mL.…

  • Combines high precision with low cost 0.5% accuracy; vernier type micrometer Liquid comes in contact with only glass and Teflon ® Viton O-ring gives a vacuum-tight seal All other plastic parts of polypropylene; instrument may be autoclaved Fills and delivers liquid with micrometer control …

  • KIMAX buret with a PTFE plug. RAY-SORB processed to protect liquids sensitive to light of shorter wave lengths. KIM-KAP dust cap is included White ceramic enamel scale. Subdivisions: 0.1mL Capacity: 50mL Replacement stopcock is 41500F-2 (8682B22).

  • Buret Auto 3Way w / PTFE Stopcock 100ml

    DWK Life Sciences (Kimble)

  • Dissolved oxygen 300-mL sample contains: Alkaline Iodide-Azide Powder Pillows, Manganous Sulfate Powder Pillows, Sodium Thiosulfate Standard Solution (0.025 N), Starch Indicator, and Sulfamic Acid Powder Pillows

  • …overflow is returned to reservoir 2002A01 (LaMotte 0847) and A06 (LaMotte 0996) burets include 50 mL plastic squeeze bottle reservoir with screw cap to hold buret. 2002A03 (LaMotte 0427) and A09 (LaMotte 0997) burets include 24 mm screw cap, but do not include reservoir. Can be furnished with 28…

  • Serialized Colored scale Teflon® stopcock plug The capacity tolerance on Class A PYREX burets is established by ASTM E-287 and is calibrated in accordance with ASTM E-542 and D-511. Each buret is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to…

  • Precision-bore buret is permanently marked with an individual serial number Supplied with a Certificate of Graduation Accuracy Designed from ASTM Specification E 287, Class A requirements For replacement stopcock, see Thomas number 8682S16 Filling tube accepts 1/4” i.d. flexible tubing.…

  • Automatic Zero Reservoir Burets

    Wilmad-LabGlass - SP Scienceware

    …20 Burets provide 7 inches clearance for titration vessel and 2001G50 Buret provides 8 7/8 inch clearance 2001F10 Buret has a 500 mL reservoir with No. 9 stopper; 2001F15 Buret has a 500 mL reservoir with No. 8 stopper; 2001F20 Buret has a 1,000 mL reservoir with No. 9 stopper; 2001G50 Buret is…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.