Bottom Sampler

Compare Tool

Select up to 3 products

Bottom Sampler
1 - 32 of 71
Sort
View
Show

Burkle

  • Tank Sampler

    Nasco

    …the sampler in the middle at about a 15° angle and pull the wire, holding the end over an appropriate container (Whirl-Pak® bag), or press and hold the pin on the bottom against a hard surface such as the bottom of a pail. This will release the valve and the sample will flow out. The sampler

  • Scienceware® Liquid Sampler

    Bel-Art Products

    …liquids, this 50ml (1.65oz) liquid sampler is made for immersion into a can, bottle, tank, vat, etc. Nickel-plated brass cup and tubular handle with finger grips are 45cm (17-1/2") long Center rod with finger ring actuates a valve in the bottom of the cup for rapid and convenient…

  • SteriWare® Disposable Slot Sampler

    Sampling Systems

    The disposable Slot Sampler is ideal for taking fast multilevel, cross sectional samples from powders and granules. The disposable Slot Sampler takes a single composite sample from the top, middle and bottom of your powder bed. Full batch traceability Fully welded construction (no…

  • Zone sampler Spiralus

    Bürkle

    Zone sampler Spiralus guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the…

  • Bottom Sampling Dredge

    LaMotte

    Stainless steel sampler is designed for use on soft bottoms (sand or silt). A simple trigger holds the sampler open while lowering to cover a uniform area. Scissor design closes sampler, retrieving a volume of sediment to the surface for analysis.

  • Flat Bottom Scoop

    Dynalon

    Scoops. Flat Bottom. High-density Polyethylene. 25 mL liquid capacity. Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.

  • Disposable Dipstik Samplers

    Cole-Parmer

    Sample free-flowing liquids from almost any source. Safety pour top permits safe and neat transfer of contents. Push/seal bottom snaps closed easily; opens by hand or with the safety opening tool sold separately. Polypropylene (PP) samplers have heat-welded bottom caps.

  • Norwell® Mucksucker Samplers

    Saint Gobain

    …feature a push/seal bottom that closes the sampling tube with a quick push against a solid surface, as well as a wide-mouth coring bottom that easily screws onto the end of the sampling tube for drawing up sludge-like substances. Engineered to last, Norwell® samplers are designed to handle…

  • Visiprep™ Large Volume Sampler for use with 3 or 6 mL SPE tubes (includes 4…

    MilliporeSigma

    …extract 12 samples, three samplers are required. The samplers consist of 1/8-inch PTFE tubing with a screw fitting at one end and a stainless steel weight at the other end. To use the sampler, feed the weighted end into a sample container until it touches the bottom. Insert the tube adapters…

  • 8 mL Polystyrene Round Bottom Tubes without Caps, Qty. 90

    PerkinElmer

    These 8 mL polystyrene round bottom tubes have an outer diameter of 13 mm.

  • 4.5 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 12 mm x 75 mm, are designed to provide excellent chemical resistance.

  • 8 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

  • 15 mL Round Bottom Polypropylene Tubes without Plugs

    PerkinElmer

    Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

  • 8 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

  • 14 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

  • 14 mL Round Bottom Polypropylene Tubes with Dual Position Caps

    PerkinElmer

    Translucent polypropylene tubes, 17 mm x 100 mm, with dual position caps, are designed to provide excellent chemical resistance.

  • 14 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

  • 16 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

  • 5 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 12 mm x 75 mm, are designed to provide excellent chemical resistance.

  • 8 mL Round Bottom Polypropylene Tubes without Caps

    PerkinElmer

    Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

  • Plugs for 15 mL Round Bottom Polypropylene Tubes20

    PerkinElmer

    Bue polypropylene plugs used with 15 mL polypropylene tubes (N0777167).

  • 15 mL Conical Bottom Polypropylene Tubes with Red Flat Caps

    PerkinElmer

    PerkinElmer translucent polypropylene tubes are designed to provide excellent chemical resistance. PerformR ™ 15 mL and 50 mL conical tubes are designed for your routine everyday applications and storage needs. SuperClear ™ tubes are made from a unique medical grade resin. PerformR and SuperClear…

  • 50 mL MetalFree Sterile Polypropylene Conical Bottom Tubes with White Flat Caps

    PerkinElmer

    MetalFree centrifuge tubes, 30 mm x 116 mm, with white flat caps, combine reliable performance in major centrifuges. Spin rates higher than most popular brands. And high quality lab certified non cyto-toxic medical grade resin.

  • 15 mL MetalFree Sterile Polypropylene Conical Bottom Tubes with White Flat Caps

    PerkinElmer

    MetalFree centrifuge tubes, 17 mm x 118 mm, with white flat caps, are produced to ensure that key trace metals are kept below one part per billion. They can be used for storage and analysis tasks that require extremely low levels of most common metals.

  • 15 mL MetalFree Sterile Polypropylene Conical Bottom Tubes with White Flat Caps

    PerkinElmer

    MetalFree centrifuge tubes, 17 mm x 118 mm, with white flat caps, are produced to ensure that key trace metals are kept below one part per billion. They can be used for storage and analysis tasks that require extremely low levels of most common metals.

  • 50 mL MetalFree Sterile Polyproyplene Conical Bottom Tubes with White Flat Caps

    PerkinElmer

    MetalFree centrifuge tubes, 29 mm x 115 mm, with white flat caps, combine reliable performance in major centrifuges. Spin rates higher than most popular brands. And high quality lab certified non cyto-toxic medical grade resin.

  • Freestanding 50 mL Polypropylene Conical Bottom Tubes with Red Flat Caps (25/Bag…

    PerkinElmer

    PerkinElmer translucent polypropylene tubes are designed to provide excellent chemical resistance. PerformR ™ 15 mL and 50 mL conical tubes are designed for your routine everyday applications and storage needs. SuperClear ™ tubes are made from a unique medical grade resin. PerformR and SuperClear…

  • Sterileware® Scoop an’ Bag Sterile Samplers

    Bel-Art Products

    … One-piece scoop made from white, high-impact, FDA grade polystyrene plastic Long handle keeps the hand away from the sample Flat bottom allows scoop to remain upright for use as a weighing boat or to be placed on a flat surface 50 individually sealed and sterilized wrapped sets…

  • Bomb Sampler, SS, Type 302, 500 mL

    DWK Life Sciences (Wheaton)

    …stainless steel, Type 302 Plunger can be activated by bumping unit on tank bottom or at any depth means of a second cord. A weighted plunger with Viton ® O-ring seals reservoir chamber at bottom. Top and bottom seals keep interior entirely sample-free until plunger assembly is activated.…

  • PVC Coliwasa

    DWK Life Sciences (Wheaton)

    …sampling unit up to 20 feet. Spin open top locking handle, insert slowly into drum to collect liquid column, pull top handle to seat bottom valve plate and spin top handle closed, trapping column in sampler. Dimensions: 1 3/8” i.d. x 1 5/8” o.d. Volume (in milliliters) given in listings.

  • Plankton Net

    LaMotte

    For collecting plankton particles in a 50 mL conical bottom centrifuge tube secured by adjustable band clamp to the bottom of a conical, 10-mesh nylon cloth net Net is 380 mm in length Top of net is fitted with 127 mm diameter brass ring and harness for attachment to suitable sampling line …

  • Sampling & Measurement Outfit

    LaMotte

    …and measurement devices all housed within a rugged field carrying case for easy transport and storage. Outfit Includes: Stainless Steel Bottom Sampling Dredge (1097) Plankton Net (1063) Sounding Lead and Calibrated Line (1064-G) Armored Thermometer (1066) Water Sampling Bottle…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.