Bottom Hose Outlet

Compare Tool

Select up to 3 products

Bottom Hose Outlet
1 - 20 of 20
Sort
View
Show
  • Carboys

    Dynalon

    …Polyethylene. 5 gallon (19 liter) square style saves space. Large handle on top  and handgrip on bottom for convenient pouring. 63mm closure molded of low density polyethylene. The serrated tubing outlet is made for 3/8" through 1/2" I.D. tubing. Maximum temperature for high-density…

  • KimCote® plastic-coated reservoir bottle. KIMAX glass hose connection outlet is fused to the bottle. Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8" I.D. tubing. With white enamel marking spot. Glass conforms to ASTM E438, Type I, Class A.

  • Bottle Reservoir 2L

    DWK Life Sciences (Kimble)

    KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…

  • …any of the corresponding lids. Lower outlet is a CG-511 bottom drain valve. Cooling jacket is equipped with two removable hose connections to reduce the risk of injury while attaching or detaching flexible tubing. Supplied complete with two polypropylene hose connections and two GL-14 screw caps.…

  • Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid. Lower outlet is a CG-424-05, 4mm PTFE straight bore stopcock.

  • …cold finger Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom 283000 does not have a drip joint Two hose connectors at the top for water inlet and outlet Ref: ASTM Method D94, D95 Manufactured from 33 expansion, low extractable borosilicate glass…

  • Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with

  • With inner and outer joints at bottom and top. Available with #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing.

  • Double-jacketed, with standard taper 24/40 inner and outer joint at bottom and top. Extra cooling capacity for volatile materials. Compact design retards diffusion. With #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for

  • Bottle Reservoir 20L

    DWK Life Sciences (Kimble)

    …and discharge liquids via a bottom valve outlet. ·     Bottom outlet is controlled with an 8 mm valve ·     Valve  can be used with 1/4” flexible tubing attached to the quick-release hose barb connector and with rigid…

  • No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include

  • Condenser Size 22

    DWK Life Sciences (Kimble)

    Friedrich Condenser with hose connection sidearm. 45/50 bottom standard taper joint Ring-sealed inner condensing tube with inner drip joint and side outlet for drying tube Molded 190 mm inner cold finger Used primarily in reflux mode and Soxhlet extractions Fits tubing ID…

  • Bulb type, approximately one bulb per 50 mm, with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing. For replacement connectors, see 5853.

  • …and inner joint at bottom, with drip tip. I.D. of inner tube on code -23 is sufficiently large enough to accept regular size thermometer. Jacket length approximately 80mm. Inlet and outlet water connections are three-ring serrated fittings with middle ring 9.5mm (3/8") O.D. Hose connections are…

  • New design jacketed receiving flask. Fits all rotary evaporators. Outer jacket has 28/15 o-ring ball joints to seal to chiller hoses. Has an SVL thread vent cap on side joint. Bottom DN25 ball joint has CAPFE o-ring. Jacket inlet and outlet ball joints have FETFE o-rings.

  • …vessel with graduation scale on both sides. Inlet/outlet has our tool-free flat flange connector. No Tools Are Necessary to attach hose fittings to the inlet and outlet of the jacket. Vessels with capacities 300mL to 1000mL are available with our NEW 0-14mm drain valve supplied complete…

  • …eyewash/drench hose and drench hose units. Temperature Control: Valve has bimetallic thermostat that senses incoming water temperature and automatically blends water to 85°F (29°C). High temperature limit stop is set to 90°F (32°C). Valve has dial thermometer on outlet to…

  • …steel; includes bottom & adapter plate for (70) microcentrifuge tubes. Ideal for Tray Dryer, Bulk Tray Dryer, Stoppering Tray Dryer. Test Tube Rack, Round (1177K29): Test Tube Rack, round, holds up to 104 12-13 mm tubes. Made of type 304 stainless steel; includes bottom. Ideal for round…

  • hose, drench hose and safety station units. Temperature Control: Valve has bimetallic thermostat that senses incoming water temperature and automatically blends water to 85°F (29°C). High temperature limit stop is set to 90°F (32°C). Valve has dial thermometer on outlet to…

  • …TFE, PFA or PP Compression Fitting All Vessels Are Serial Numbered GL Thread Inlet/Outlets Are Supplied With Removable High Temperature PFA Hose Connections And PPS Screw Caps 3/4in Beaded Pipe Inlet/Outlets Are For Use With CG-1968-70 Couplings, CG-1969-A-03 Or CG-1964-42 Adapters …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.