Bottles Polyethylene

Compare Tool

Select up to 3 products

Bottles Polyethylene
1 - 32 of 505
Sort
View
Show
  • Polyethylene Bottles

    DWK Life Sciences (Wheaton)

    Clear bottles are made from borosilicate glass Amber bottles are square, round or jug handled Amber glass bottles are available safety coated Square polyethylene bottles are available in 250 - 2500 mL size

  • 250mL narrow mouth bottle, polyethylene

    PerkinElmer

    250mL narrow mouth bottle, polyethylene qty. 12

  • Low-Density Polyethylene Bottles

    Thermo Scientific Nalgene

    …and leakproof; ideal for trace metal analysis Polypropylene screw closures 8, 15, 30 and 60 mL bottles have a 20-415 cap size; 125 and 250 mL bottles have a 24-415 cap size; 500 mL bottles are available with 28-415 and 38-430 cap sizes; 1,000 mL bottles have a 38-430 cap size.

  • Bottles, Low-Density Polyethylene Spouted

    Dynalon

    Low density polyethylene bottles with polyethylene dropper closure with captive cap. Supplied capped in shrink-wrapped packs of ten. Maximum temperature for low density polyethylene is 80°C.

  • High Density Polyethylene Narrow Mouth Bottles, Amber, Standard

    J.G. Finneran

    Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned) Containers are processed according to EPA recommended wash procedures. Washed with…

  • Bel-Art Automatic Burets

    Bel-Art - SP Scienceware

    … Small screw clamp presets drop speed for repeat titration Polyethylene filling tube extends from buret top into bottle reservoir 10 mL and 15 mL Burets have a 500 mL reservoir bottle; other burets have 1,000 mL bottle. Bottle, screw cap and round base are made from polyethylene.

  • Bottles, High-Density Polyethylene Wide Mouth

    Dynalon

    These wide mouth lab bottles are available in translucent or amber rigid high density polyethylene. The amber lab bottles can be autoclaved. Bottles are ideal for storage and handling of liquids or solids. Translucent bottles are made with FDA approved resin for non-contaminating storage of…

  • High Density Polyethylene Wide Mouth Jars, Standard

    J.G. Finneran

    Preassembled with foamed polyethylene lined polypropylene closures. All HDPE bottles and jars are also available with PTFE-lined closures or unlined closures. Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with…

  • Polyethylene Reservoir Bottle

    Barnstead

    Capacity 6 liters With size 53 polyethylene screw cap, polyethylene spigot and overflow tube which takes 3/8” i.d. tubing Height 16 1/4”; as furnished with Thomas number 3915G20 Water Still

  • High Density Polyethylene Wide Mouth Bottles, Amber, Standard

    J.G. Finneran

    Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned) Containers are processed according to EPA recommended wash procedures. Washed with…

  • Bottles, Low-Density Polyethylene Buttress

    Dynalon

    Low Density Polyethylene bottles. Narrow mouth with a polyethylene buttress closure. Maximum temperature of low-density Polyethylene is 80°C.

  • High Density Polyethylene Narrow Mouth Bottles, Precleaned

    J.G. Finneran

    Preassembled with foamed polyethylene lined polypropylene closures. All HDPE bottles and jars are also available with PTFE-lined closures or unlined closures. Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with…

  • High Density Polyethylene Wide Mouth Bottles, Natural, Standard

    J.G. Finneran

    Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned) Containers are processed according to EPA recommended wash procedures. Washed with…

  • Fluorinated Polyethylene Bottles

    Thermo Scientific Nalgene

    Wide mouth, Fluorinated HDPE Nalge 2197 series Provides improved barrier properties and reduces solvent absorption and permeation Fluorinated inner and outer surface Useful with acids, alkalies and organic solvents Leakproof Fluorinated polypropylene screw cap closure

  • Scienceware® 4-Color Safety-Vented & Labeled Wash Bottles

    Bel-Art - SP Scienceware

    …Valve also allows dispensing whether bottle is in an upright or inverted position. Wide mouth (53mm) for easy refilling; bottles are made of translucent* LDPE (Low Density Polyethylene) and feature color caps to enhance identification. Pre-printed bottles include: chemical name and formula, NFPA…

  • High Density Polyethylene Narrow Mouth Bottles, Standard

    J.G. Finneran

    Preassembled with foamed polyethylene lined polypropylene closures. All HDPE bottles and jars are also available with PTFE-lined closures or unlined closures. Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with…

  • Bottles, Low-Density Polyethylene Dispensing

    Dynalon

    …(l x w x h) : 0x3.1x10.875in Tall-style one liter cylindrical bottle supplied with spout and sealer caps. Sealer snaps on easily for tight seal. Spout openings are standard .030" and can be enlarged by cutting tip. Maximum temperature for low-density Polyethylene is 80°C.  

  • Bailers

    Voss

    SingleSample® Disposable Polyethylene Bailers Eliminates field clean-up and cross-contamination Rugged, high-density polyethylene Each unit individually decontaminated with Liquinox™ washing and DI water rinse Ready-to-use Capacity approximately 1 L Friction-fit nozzle for easy,…

  • Polyethylene Safety Washing Bottles

    Chemglass

    Easy-to-read, break-resistant dispensing bottles include DOT, CAS numbers, National Fire Protection Association (NFPA) codes and symbols, protective equipment symbols, and target organ information. Polypropylene nozzle assemblies are leakproof and color-coded to match bottle label.

  • Bottles, High-Density Polyethylene Narrow Mouth

    Dynalon

    Leakproof, rigid and translucent these high-density Polyethylene narrow mouth lab bottles have excellent chemical resistance. Ideal for storage and handling of liquids or solids. Made with FDA approved resin for non-contaminating storage of chemicals and food grade products.  

  • Polyethylene Carboy Bottles with Spigots

    Bel-Art - SP Scienceware

    …solutions, laboratory chemicals, disinfectants, and intermediate phase mixtures and slurries for various manufacturing processes. The spigot opens fully in one half turn. Molded of polyethylene which resists corrosive acids and alkalis. Extra heavy walls, yet lighter than glass. Sold per each.

  • Thick Wall Polyethylene Bottles

    Thermo Scientific Nalgene

    …with polypropylene screw caps Leakproof 1 Liter bottles include size 53B caps. Dimensions: 9” high, 3 1/2” o.d. 2 Liter bottles include size 53B caps. Dimensions: 10 1/4” high, 4 3/4” o.d. 4 Liter bottles include size 83B caps. Dimensions: 13 3/4” high,…

  • Narrow-Mouth Bottle HDPE 15 ml

    Thermo Scientific Nalgene

    …Narrow-Mouth bottles are all-purpose Boston round bottles that are highly reliable and durable for long-term use. Ideal for storing, shipping and packaging liquids. Capacity: 15ml (1/2 ounce); closure size: 20mm Material: High-density polyethylene Boston round bottle, with a…

  • Bottles, Low-Density Polyethylene Wide Mouth

    Dynalon

    Translucent, low-density Polyethylene wide mouth bottles with leakproof polypropylene screw closure. Made from FDA approved resin for use with food products. Bottles have greater flexibility and impact resistance than high-density Polyethylene bottles.

  • Amber Wide Mouth Polyethylene Bottles

    Thermo Scientific Nalgene

    Pigmented to provide protection for light-sensitive materials Nalge 2106 series Amber HDPE Screw cap Leakproof Complies with U.S. Pharmacopoeia 23 requirements for maximum light transmission

  • Bottles, High-Density Polyethylene Narrow Mouth Amber

    Dynalon

    Leak proof and rigid, these amber high density polyethylene narrow mouth lab bottles have excellent chemical resistance and are suitable for sampling and storage of sensitive materials. Supplied with black polypropylene screw closures. Excellent chemical resistance. Bulk packed with closures…

  • Bottles, High-Density Polyethylene Amber Wide Mouth

    Dynalon

    Leak proof, rigid and amber these high density polyethylene wide mouth 150 mL lab bottles have excellent chemical resistance and are suitable for sampling and storage of light sensitive materials. Excellent chemical resistance. Supplied with black polypropylene screw closures.

  • Fluorinated Carboys and Bottles

    Thermo Scientific Nalgene

    …Nalge 2097 series HDPE with polypropylene screw closure Heavy duty walls Leakproof Safe, durable, cost-efficient, high-density polyethylene narrow mouth bottles are suitable for shipping Fluorocarbon surface, a Teflon ® -like skin provides improved barrier properties and reduces solvent…

  • Bottles, Low-Density Polyethylene Narrow Mouth

    Dynalon

    Translucent, low density Polyethylene narrow mouth bottles with leakproof Polypropylene screw closure. Made from FDA approved resin for use with food products. Bottles have greater flexibility and impact resistance than high-density Polyethylene bottles. Bulk packed bottles come with closures…

  • Bottle/Jug Low-Density Polyethylene Handle 1 Gallon

    Dynalon

    …(l x w x h) : 0x5.88x12.875in This one gallon jug is molded of low-density Polyethylene with convenient, finger ring for easy handling. Supplied with a 38 mm buttress screw closure. Heavy weight for long service. Maximum temperature for low-density Polyethylene is  80°C.  

  • High Density Polyethylene Narrow Mouth Bottles, Natural, Standard

    J.G. Finneran

    Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned) Containers are processed according to EPA recommended wash procedures. Washed with…

  • Bottle, High-Density Polyethylene Handle 1 Gallon

    Dynalon

    Product Dimensions (l x w x h) : 0x6x11.75in 1 gallon capacity molded of high density Polyethylene with handle for convenient carrying. Supplied with 38 mm polypropylene closure for tight seal.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.