Bottle Top Filter Unit

Compare Tool

Select up to 3 products

Bottle Top Filter Unit
1 - 32 of 37
Sort
View
Show
  • SFCA Bottle Top Filters

    Thermo Scientific Nalgene

    …agents have been shown to be toxic to specific cell lines in vitro (1-3). SFCA also has lower protein binding than does standard CA. If you must use CA for media filtration, you owe it to your cell lines to switch to SFCA. SFCA is available only in Nalgene filter units and bottle top filters.

  • PES Bottle Top Filters

    Thermo Scientific Nalgene

    … 90 mm diameter filters provide large surface area for serum and other hard-to-filter solutions Ergonomic design 1 1/2 turn screw cap, tapered sides and “grips” make the filter units and storage bottles easy to handle Wide base improves stability on the bench top Nalgene PES:…

  • Autofil® 50 mL Funnel Only with 0.2 µm PES Membrane, 48/pk 40mm Filter Diameter Permanent vacuum hose connection to minimize set-up time Made from Class VI Materials Manufactured in a Class 100,000 Clean Room Manufactured according to ISO 13485 standards Gamma Sterilized in the USA …

  • …receiver unit are sterilized by gamma irradiation. Caps for receiver bottle are supplied sterile and individually packaged. Receiver bottles feature easy-grip sides for improved handling. Angled hose connectors simplify vacuum line attachment. Convert to storage bottles by unthreading filter and…

  • CN Filter Units

    Thermo Scientific Nalgene

    … 90 mm diameter filters provide large surface area for serum and other hard-to-filter solutions Ergonomic design 1 1/2 turn screw cap, tapered sides and “grips” make the filter units and storage bottles easy to handle Wide base improves stability on the bench top Nalgene CN: For…

  • SFCA Filter Units

    Thermo Scientific Nalgene

    …agents have been shown to be toxic to specific cell lines in vitro (1-3). SFCA also has lower protein binding than does standard CA. If you must use CA for media filtration, you owe it to your cell lines to switch to SFCA. SFCA is available only in Nalgene filter units and bottle top filters.

  • Filter Systems

    Celltreat Scientific

    …purification. The filter systems are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes for rapid flow rate and low protein binding. The filter units are available in…

  • Steritop bottle top filter units provide a large filter area for rapid sterile filtration of aqueous fluids into narrow-mouth (33 mm) or wide-mouth (45 mm) bottles. A small tab inside the funnel secures an optional prefilter in-place during filtration. For added protection against contamination, the…

  • Filter units contain either a 47, 60 or 90 mm diameter filter membrane integrally sealed to a support grid designed to maximize flow and reduce foaming and protein denaturation. The filter funnels, dust covers and receiver/storage bottles are manufactured from polystyrene. Tubing adapter, filter

  • …combines a Steritop filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL. ?? Its new no tip/easy grip flask design and compact profile improve stability during filtration, make gripping the receiver easier, and make Stericup Filter Units ideal for use in…

  • Filter directly into centrifuge tubes Sterile, individually packaged Certified non-pyrogenic Minimizes contamination Low protein binding, 50 mm diameter cellulose acetate (CA) membrane, recommended for use with samples requiring highest protein yields. Eliminates unneccesary…

  • PES Filter Units

    Thermo Scientific Nalgene

    …90 mm diameter filters provide large surface area for serum and other hard-to-filter solutions Ergonomic design 1 1/2 turn screw cap, tapered sides and “grips” make the filter units and storage bottles easy to handle Wide base improves stability on the bench top Nalgene…

  • …available as a complete system or funnel only Funnel is compatible with GL45 thread bottles Autofil SS units include adapter for connecting to vacuum hose Autofil SS design includes an ergonomic bottle shape with molded finger grips Autofil SS patented SECUREgrasp cap provides a…

  • …polystyrene with easy to read graduations. Available in 150, 250, 500 and 1000mL sizes. Filter adapter manufactured from 100% virgin polypropylene. Universal 45mm neck size. Unit is sterile and individually wrapped The reservoir has a large cap for easy pouring Hose connector…

  • …traditional bottle-top filter assemblies. All active components are FDA-grade which makes Autofil® PP perfect for the extraction of compounds used in the food and drug industry. Foxx Autofil® PP is designed to conveniently fit on top of most laboratory bottles with a GL45 thread.…

  • Steritop bottle top filter units provide a large filter area for rapid sterile filtration of aqueous fluids into narrow-mouth (33 mm) or wide-mouth (45 mm) bottles. A small tab inside the funnel secures an optional prefilter in-place during filtration. For added protection against contamination, the…

  • … Easy-to peel open packaging; receiver bottle cap is individually wrapped Units are printed with lot numbers for easy identification New surfactant-free cellulose acetate filter membranes Surfactant-free cellulose acetate filter membranes contain none of the wetting agents…

  • …radiation-sterilized Thermo Scientific™ Nalgene™ Rapid-Flow™ Filter Storage Bottles. Use with Nalgene Bottle-Top Filters or as replacement/extra receptacles for Nalgene Tissue Culture and Sterilization Filter Units. Excellent as single-use storage containers. Headspace…

  • Nylon Filter Units

    Thermo Scientific Nalgene

    … 90 mm diameter filters provide large surface area for serum and other hard-to-filter solutions Ergonomic design 1 1/2 turn screw cap, tapered sides and “grips” make the filter units and storage bottles easy to handle Wide base improves stability on the bench top Nalgene NYLON:…

  • FlexiRoll Digital Cell Roller

    Argos Technologies

    …the filter paper. To maximize bench space the FlexiRoll can be stacked into a two tiered unit to provide additional roller bottle capacity. By inserting the anodized aluminum legs the second unit rests on top of the first allowing six rollers bottles to be cultured at a time. Each stacked unit

  • …combines a Steritop filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL. ?? Its new no tip/easy grip flask design and compact profile improve stability during filtration, make gripping the receiver easier, and make Stericup Filter Units ideal for use in…

  • …the filtering of small volumes Volume: 500µL Removes bacteria Filters consist of a membrane-containing filter unit within a centrifuge tube. The filter removes bacteria and particles, cells from media, and DNA from agarose or acrylamide gels. Maximim RCF is 16,000. Filters

  • Sigma® Filter System

    MilliporeSigma

    …lowest protein binding and low extractables and are best for filtering cell culture media. Receiver bottles feature easy grip sides for improved handling. Additional storage bottles can be purchased to increase capacity. Bottle caps are supplied sterile and individually packaged. Angled…

  • Filtration Units

    Sarstedt

    …from solutions Ergonomically shaped receiver bottles 250 ml – 1 liter with extra volume and improved stability Easy product identification Filter material, pore size and lot number printed on the filter housing Ideal for cold sterilization of,…

  • ZapCap Bottle-Top Filters

    GVS Filter Technology

    … Can be used up to 50°C ZapCaps are complete 500 mL units complete with tubing for attaching to bottle tops. The connection will seal on any standard bottle (33-45 mm). Membrane diameter is 76 mm and filter area is 39.2 cm 2 . ZapCap-S comes with a borosilicate pre-filter…

  • Bubble Point Test Apparatus

    Thermo Scientific Nalgene

    …integrity of Thermo Scientific™ Nalgene™ MF75 Series Filter Unit or Bottle Top Filters by using the Nalgene™ Bubble Point Test Apparatus. Tests filter unit membranes without removing the membrane from the filter unit. Cast aluminum Tests the bubble point of 50, 75 and…

  • filter unit with a redesigned receiver bottle for filtering and storing volumes from 150 to 1000 mL, and are ideal for sterilization and/or clarification of buffers, cell and tissue culture media and other aqueous solutions. The Quick Release filter funnel disconnects from the receiver bottle

  • P-Vac Portable Vacuum System

    Argos Technologies

    …liquid waste disposal system. The unit’s small footprint makes it ideal for the laboratory bench or laminar hood. It has been designed to accommodate a variety of collection vessels including bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device…

  • Autofil® Centrifuge Tube Stand

    Foxx Life Sciences

    Foxx Life Sciences' Centrifuge Tube Stands are intended for use with centrifuge tubes. They are made from Class VI, FDA Grade, BPA-Free Polystyrene, and are conveniently sold in packs of 5. Autofil tube stand can hold one 15ml or 50ml tube Can also be used with the Autofil Centrifuge…

  • …if the unit is set to fill or titrate. Reagent recirculation system eliminates reagent loss. All valves are interchangeable. Luer-Lock connection is provided for filter or dry tube. All components that come in contact with media are autoclavable. Units include a mounted discharge unit and A45…

  • …® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop ® filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL in a single, ready-to-use format. Its no-tip, easy-grip flask…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.