Bottle

Compare Tool

Select up to 3 products

Bottle
1 - 32 of 26422
Sort
View
Show
  • Balsam Bottle

    DWK Life Sciences (Wheaton)

    Of Wheaton “810” soda lime glass Capacity 100 mL Provided with a glass applicator rod and a glass cap, which is ground to fit the shoulder of the bottle to form a seal

  • Collection Bottle

    Barnstead

    …glass bottle with bottom drain hole Control assembly, seated on bottle neck, turns off water and power to still when bottle is full and restores feed and power to still when 10 liters of water have been drawn off Draw-off is made by gravity flow through drain in center of bottle bottom…

  • Amber Bottle

    BrandTech®

    …sensitive products and samples, these amber bottles are constructed of soda-lime glass and have a space-saving square design. The ethylene-acrylate coating envelops the glass bottle like a protective skin providing better protection. Should the bottle break, the splintering hazards are reduced…

  • Bottle Holders

    TrippNT

    Stabilize and store squeeze bottles Provide convenient access to solvent wash bottles Hold one, two or three 8 oz. or 16 oz. bottles up to 3" in diameter Durable Kydex ® units keep top-heavy bottles from falling over to prevent spills. The superior chemical resistance…

  • BOD Bottle Accessories

    DWK Life Sciences (Wheaton)

    BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…

  • Flask/BOD Bottle Brushes

    Allows access to entire inside surface of flasks or BOD bottles Black hog bristle brush 4 1/4” long mounted on a flat steel shank attached to pivoting shaft Brush (12 1/8” long) has bristle diameter of 1 1/2”; brush (16” long) has bristle diameter of 1 …

  • Dipping Bottle

    Bürkle

    …closure made of electrically conductive polyamide. With Easy-Click, safe and practical closure for a rapid bottle exchange High weight (3.3 kg) for fast lowering Bottle made of transparent glass 1000 ml contents Height with handles 330 mm Please order the appropriate lowering…

  • Babcock Bottle

    DWK Life Sciences (Kimble)

    Reading in 1/100 mL divisions, with auxiliary filling tube Size 50/100% ( 1/2%), 18 grams; length 165 mm Also qualified for use in Babcock method for fat in buttermilk

  • Bottle Jacket

    Justrite

    Justrite's unique Bottle Jacket gives you the added protection of a polyethylene safety "jacket" to surround glass chemical bottles. Lab bottles fit into the bottom half of the jacket and lid twists on securely for safe pouring. Translucent color aids in detecting liquid level. Jacket…

  • Book Bottle

    Bel-Art Products

    Space Saver with Two Hand Holds Unique, polypropylene book bottle stacks book-like on shelves for efficient use of space. Includes top handle and convenient front grip hold for easy removal from a shelf Capacity: 5 liters (1.25 gallons) Graduated markings on front in liters

  • ELUENT,EC-X100,1 BOTTLE

    Hamilton

  • Bottle 16oz.Bulk

    SciSpec

  • Bottle 32oz.Bulk

    SciSpec

  • Bottle 250ml

    DWK Life Sciences (Kimble)

  • Bottle 8oz.Bulk.

    SciSpec

  • Bottle Fluid D 500mL 660 Bottle

    BD

  • Rinsing Agent Bottle

    PerkinElmer

    Rinsing Agent Bottle

  • Fluorolube, 1oz bottle

    PerkinElmer

    Fluorolube, 1oz bottle

  • Angled Bottle Rest

    Diversified Biotech

    Angled bottle rest supports round or square bottles at a 45° angle making it suitable for use with a variety of manual and electronic pipettors. Angle allows for ergonomically correct and comfortable pipetting by reducing arm and wrist strain. Design accommodates both 50 mL and 1 L square and…

  • Urine Specimen Bottle

    Simport

    Made of polypropylene Features a dip-stick well for small volume testing and a pour spout for dripless pouring. Translucent, with a stable square base. Can be autoclaved. Also useful as a drosophila stock bottle. Snap Cap for 1219C81 Specimen Bottle Made of polyethylene; 46 mm

  • Polyethylene Wash Bottle

    Hach

    Low-density polyethylene bottle with polypropylene screw closure features tubulation molded into bottle to eliminate any possibility of leakage. Entire contents can be dispensed without tipping or shaking.

  • Scienceware® Bottle Carrier

    Bel-Art Products

    This bottle carrier is made of 1/4" thick high-density polyethylene. Measures 36 x 18 x 15cm H (14 x 7 x 6"H), with a 25.4mm (1") diameter handle. Divider sold separately Each compartment measures 8.5 x 8.5cm (3-3/8/8 x 3-3/8")

  • Bottle Carrier Cart

    TrippNT

    TrippNT's Bottle Carrier Cart has 17 angled compartments that store, organze and transport bottles in individual bins. Made from resistant and durable ABS bottles stay separated for use. The convenient storage angle make it easy to see, stock and remove bottles or other items as needed.

  • PYREX Centrifuge Bottle

    Corning

    Heavy wall Screw cap Particularly useful in handling sputum specimens, this bottle enables digestion, shaking, neutralizing and centrifuging to be performed in one container. The tight-fitting polypropylene screw cap with Teflon® liner reduces the possibility of aerosol escape.

  • Scienceware® Vacuum Aspirator Bottle

    Bel-Art Products

    The Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…

  • Rectangular HDPE Bottle

    Thermo Scientific Nalgene

    Uniform walls are resistant to splitting or puncturing Natural HDPE Bottle with PP Closure Bulk packed for packaging applications Leakproof†

  • Kartell Pump Dispensing Bottle

    Dynalon

    Supplied with PP closure, this 500mL Pump Dispensing Bottle is highly suitable for dispensing liquids and creams. Wide surface area is easily labeled with contents. Pump Dispensing Bottle is suitable for food grade products. Dimensions: 3" diameter x 9" height

  • Wash Bottle Set

    United Scientific Supplies

    Set of four 500ml LDPE bottles are translucent and manufactured from low density polyethylene (LDPE). Graduated on the outer surface to reflect an approximate volume of solution filled or dispensed.  Bottles in clude polypropylene (PP) caps, one each of red, yellow, blue, and white.

  • SYNTHWARE Gas Washing Bottle

    Kemtech America

    Gas washing bottle with an extra large diameter (60mm) fritted disc sealed into the bottom of the bottle to enable increased gas throughput and uniform gas distribution. Available with coarse fritted disc. The 24/40 standard taper top outer joint accepts a A292440 gas inlet adapter which is supplied…

  • Acid/Solvent Bottle Carriers

    Bel-Art Products

    …out. The shortened lid allows only the cap of the bottle to protrude for safer pouring. Both carriers hold standard US reagent bottles. Shatter resistant polyethylene carriers Heavy-gauge steel wire bail has durable epoxy coating Ribs in sides and bottom suspend the filled bottle

  • Flint Glass Bottle

    United Scientific Supplies

    Round, Clear Flint glass bottle, 60ml capacity.

  • Hubbard Specific Gravity Bottle

    Wilmad LabGlass

    This borosilicate glass specific gravity bottle is used in standard test methods for specific gravity of a variety of semi solid materials and emulsions, such as asphalt cements, road tars, road oils, and soft tar pitches. The solid Standard Taper stopper has a hole approximately 1.6mm in diameter…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.