Boss Head

Compare Tool

Select up to 3 products

Boss Head
1 - 11 of 11
Sort
View
Show
  • 3-Prong Extension Clamps

    United Scientific Supplies

    …spring-type adjustment screws. Available with an extension rod 8.25" long, 5/16" OD, with an overall length of 12.75", or with a boss head clamp that can swing freely and is lockable at any angle up to 360°, and can be used with rods up to 19mm. Recommended maximum working…

  • Hardware Assortment Kit

    United Scientific Supplies

    …in a re-usable storage box. Contents: Alligator Clip w/ 24" Wire - 2 Burette Brush - 1 Burette Clamp, Double - 1 Clamp Boss Head - 1 Clay Pipe Triangle, 2" - 1 Crucible Tong Plated 9" - 1 Electrodes, Carbon Rods - 2 Metric Ruler, Plastic 30 cm - 1 Nichrome…

  • Research Grade Lab Starter Kit

    Eisco

    …research grade components Includes: (1) base, (1) rod, (1) beaker tong, (1) crucible tong, (1) tripod stand, (1) wire gauge, (1) boss head, (1) clamp, (1) retort ring with boss head, (1) burette clamp double, (1) test tube holder, (1) test tube stand (z-shape), (1) test tube brush- spatula

  • Corning® Boss Head Support Clamp

    Corning

    Corning offers a 2" long right angle black anodized aluminum Boss Head clamp that will accept up to 7/16" diameter support rods. It is designed to be used with the Corning Temperature probe support clamp (Cat. No. 440141).

  • Universal Clamp

    GSC International, Inc.

    Both sides of the clamp have screw type fitting that allow you to lock release or tighten as needed. The boss head clamp can be used on a stand rod up to 1.9 cm in diameter.

  • Corning® Temperature Probe Support Clamp

    Corning

    …a 7/16" (1.1cm) diameter by 6 1/2" (16.5cm) support clamp for Corning Cat. No. 6795PR and 400188 temperature probes. Support has two openings, 1/3" (9mm) and 0.15" (3.75mm), for holding probes. It is designed to be used with a boss head clamp (Corning Cat. No. 440140) or standard right angle clamp.

  • C-MAG HS 7 Basic Complete Package

    IKA Works

    Magnetic stirrer with ceramic heating plate. Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5. Package includes: C-MAG HS 7 hotplate stirrer ETS-D5 temperature sensor H 16 V Support rod H 38 holding rod H 44 boss head clamp

  • 4-Prong Extension Clamp

    United Scientific Supplies

    Features a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".

  • 2 Prong Cork, PVC, and Silicone Lined Buret Clamp

    United Scientific Supplies

    …type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall length of 12 ¾" (32cm), Or with a boss head clamp that can swing freely and is lockable at any angle up to 360°, and can be used with rods up to 19mm. Recommended maximum working temperature…

  • Hot Plate / Magnetic Stirrer

    United Scientific Supplies

    …temperature controller, RPM controller, and time controller, all of which have independant LED displays. The following accessories are included: Boss Head Clamp, Stainless Steel Rod, Magnetic Stir Bar, and PT100 sensor probe.The technical specs are: Speed range of 50 to 1500RPM, Maximum Stir Bar…

  • Deluxe Digital Hot Plate with Magnetic Stirrer

    United Scientific Supplies

    …hotplate and probe temperature, Adjustable safety cutoff range of 50-400°C, Designed for use with beakers/flasks up to 2000ml in capacity. Includes the following accessories:  Stainless steel rod, 400mm long, 12mm diameter, PT100 sensor probe, Magnetic stirbar, 35mm x 9mm, Boss head clamp.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.