Borosilicate Glass Pipet

Compare Tool

Select up to 3 products

Borosilicate Glass Pipet
1 - 32 of 56
Sort
View
Show
  • Borosilicate Type I Clear Glass Pasteur Pipettes

    DWK Life Sciences (Wheaton)

    Manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements.

  • Borosilicate Glass Pasteur Pipets

    DWK Life Sciences (Kimble)

    High-quality borosilicate glass, plain or cotton-plugged Designed from ASTM E732 specifications Ungraduated with square-cut ends Tip length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is approximately 120 mm. Constriction approximately 25 mm from…

  • Serological Pipets, Glass Cotton-Plugged, Bagged

    DWK Life Sciences (Kimble)

    …cotton-plugged, bagged N-51A borosilicate glass; color-coded, graduated scale Designed from ASTM Standard E-714 Tolerances: 1 mL pipet, ±0.02 mL ; 2 mL pipet, ± 0.4 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.30 mL Calibrated to tip, for blow-out, 7536S55 pipet is ungraduated below 0.92 mL;…

  • Serological Color Coded Class B Pipettes

    Wilmad LabGlass

    Calibrated "to deliver" at 20°C, these borosilicate glass pipettes have a permanently colored amber scale with the zero line at the top. The small amount remaining in the tip, after completion of free delivery, is blown out and added to the main delivery volume (ground band indicator…

  • Volumetric Pipets

    Thermo Scientific Sun SRi

    Type 1, Class A borosilicate glass Standard size pipets meet ASTM E 969 tolerance limits Pipets have standard size openings

  • Serological Pipets

    DWK Life Sciences (Kimble)

    …the main volume delivered. Provided with "negative" graduations to increase the versatility of the pipet. Made from borosilicate glass in compliance with ASTM Standard E438, Type I, Class B glass requirements. Designed from ASTM Specification E714. Packaged in a convenient reclosable canister pack.

  • Serological Pipets, Disposable Cotton-Plugged, PYREX Shorty

    Corning

    …retention, and pipets may be used without blow-out in manner used with measuring pipets calibrated "to deliver". Proper negative graduation must be determined for viscosity of fluid being dispensed and for drainage time to be allowed. Borosilicate glass, with permanent fired-on…

  • Reusable Volumetric Class B Color-Coded Pipets

    DWK Life Sciences (Kimble)

    The most commonly used volumetric pipet in general laboratory work. Color coded Designed from ASTM Specification E969, Class B requirements Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

  • Serological Pipettes

    United Scientific Supplies

    Serological pipettes are manufactured from specially selected, heavy wall machine drawn borosilicate accurate bore glass tubing. They have precision fored jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain; both are resistant to normal…

  • Pipet Serological Glass Single Wht 2ml

    DWK Life Sciences (Kimble)

    …the versatility of the pipet 72105 series is packaged in color-coded paper/plastic individual wrap and overpacked in convenient dispensing shelf packs for laboratory benches Designed from ASTM Specification E714 Manufactured from 51 expansion borosilicate glass conforming to USP Type I…

  • Milk Testing Pipets

    DWK Life Sciences (Kimble)

    …tempered Of borosilicate glass Color-Coded, Kimax, Glass, 11 mL Capacity 11 mL, with graduations at 1 mL intervals Calibrated to deliver Scale markings are fused on For milk and milk dilutions Tip is Safe-Gard tempered With constriction at top for cotton plug Of borosilicate glass

  • ValueWare™ Class A Volumetric Pipets

    DWK Life Sciences (Kimble)

    …for laboratory work Marked, in permanent brown stain, with large numerals on the bulb, indicating capacity Supplied unserialized Colour-coded (ASTM E1273) for easy identification Made from KIMAX® N-51A borosilicate glass Designed from ASTM Specification E969, Class A requirements

  • Scienceware® Varipet® Pipettors

    Bel-Art Products

    … Accuracy is ± 0.5% Teflon® Tip Varipet® Pipettor has excellent chemical resistance because the fluids only contact the borosilicate glass and Teflon® Luer Lock Varipet® Pipettor is supplied with a chrome-plated steel Luer lock fitting, complete with removable cannula…

  • Clear Dropping Bottles with Standard Taper Pipet

    DWK Life Sciences (Kimble)

    …Standard Taper pipet dropper and a rubber nipple The 30 and 60 mL sizes are designed from Federal Specification A-A-5134 requirements The 125 mL size is manufactured from USP Type 1 borosilicate molded glass, and all others are manufactured from 33 expansion, low extractable borosilicate glass

  • Corning Disposable Pasteur Pipets

    Corning

    Available in borosilicate or soda-lime glass PYREX® Pasteur Pipets are made from heat-resistant borosilicate Code 7800 glass Corning Pasteur Pipets are mode from economical soda-lime glass One-time use eliminates the danger of cross-contamination of valuable specimens or…

  • Microsyringe Pipet 0-3ul

    Hamilton

    …Point Style 3 Needle Length 0.75 inch (19.1 mm) Std. Needle Dead Volume 0.24 μL Fluid Path SST, borosilicate glass Autoclavable No Gas Sterilizable Yes Pressure 2000 psig (137.9 bar) Maximum Temperature …

  • Syringe Pipet 100-200ul

    Hamilton

    Hamilton 84302 CR-700 200µL CR700-200 Constant Rate HPLC Syringe with 22g x 2" x PT3 Needle has preset volumes that can be dispensed at a constant flow rate. The volume is adjustable with a precise adjustable micrometer screw. The adjusted volume can be fixed with a locking ring.…

  • Syringe Pipet 10-20ul

    Hamilton

    Hamilton 84301 CR-700 20µL CR700-20 Constant Rate HPLC Syringe with 22g x 2" x PT3 Needle has preset volumes that can be dispensed at a constant flow rate. The volume is adjustable with a precise adjustable micrometer screw. The adjusted volume can be fixed with a locking ring.…

  • Vista Vial™

    J.G. Finneran

    glass base, choose from clear or amber Type I borosilicate glass. The tops are made of polyethylene and are available in a variety of neck finishes - 8-425mm thread, 9mm thread, 11mm crimp. The Vista Vial(tm) is easier to fill - the wide opening of the glass bottom facilitates direct pipetting

  • Syringe Pipet 20-50ul

    Hamilton

    Hamilton 84303 CR-700 50µL CR700-50 Constant Rate HPLC Syringe with 22g x 2" x PT3 Needle has preset volumes that can be dispensed at a constant flow rate. The volume is adjustable with a precise adjustable micrometer screw. The adjusted volume can be fixed with a locking ring.…

  • PYREX® 2.2mL Disposable Bacteriological Pipets, Multi-Pack, Sterile, Plugged,…

    Corning

    These sterile disposable 2.2mL PYREX® borosilicate glass pipets meet the requirements recommended by the American Public Health Association as shown in "Standard Methods for the Examination of Dairy Products." This pipet is very convenient when duplicate platings are to be made on the same medium or…

  • 2.0mL Versa Vial™

    J.G. Finneran

    …variations in the robotic arm settings for reliable sample pick-up. The wide ID, 9mm opening, allows samples to be added using a pipet tip. Choose from clear or amber Type I borosilicate glass. Marking spots are available and can be written on with a #2 pencil for easy sample identification.

  • Reusable Volumetric Class A To Contain and To Deliver Pipets

    DWK Life Sciences (Kimble)

    …To Deliver (TD) to Class A tolerances TC feature accommodates use with viscous liquids Color coded Unserialized Designed and manufactured to ASTM E969 requirements Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

  • Unserialized Reusable To Deliver Volumetric Class A Pipets

    DWK Life Sciences (Kimble)

    Calibrated To Deliver (TD) Color coded Designed from ASTM Specification E969, Class A requirements 75 and 200mL sizes are designed from ASTM E542 Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

  • Serialized and Certified Reusable To Deliver Volumetric Class A Pipets

    DWK Life Sciences (Kimble)

    …the correct pipet With a legend of permanent brown stain KIMAX® pipet has a permanently marked individual serial number and is autoclavable Supplied with a Certificate of Graduation Accuracy Carefully selected to meet the requirements for accuracy, appearance, glass quality,…

  • Serological Pipets, Cotton-Plugged, Individually Wrapped

    DWK Life Sciences (Kimble)

    Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.

  • Borosil® Reusable Class A Serological Pipettes (Pipets)

    Foxx Life Sciences

    …collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North American…

  • Borosil® Reusable Class A Volumetric Pipettes (Pipets)

    Foxx Life Sciences

    …collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North American…

  • Universal Inlet Adapters with Screw Cap

    Wilmad LabGlass

    Borosilicate glass universal inlet adapters are capable of sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a…

  • Borosil® Reusable Class A Mohr (Measuring) Pipettes (Pipets)

    Foxx Life Sciences

    …collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North American…

  • Serological Pipets, Standard Non-Sterile, KIMAX

    DWK Life Sciences (Kimble)

    Calibrated "to deliver" N-51A borosilicate glass Not sterilized or cotton-plugged Size 10 mL has constriction near top, forming chamber in which protective cotton plug can be inserted 7536U86 contain five shelf packs of 100 each.

  • Volumetric Color Coded Class A Pipettes

    Wilmad LabGlass

    Calibrated "to deliver" (TD) at 20°C, these borosilicate glass, color coded pipettes are fabricated to meet the requirements for accuracy, appearance, glass quality and calibration line accuracy. Reference: Volumetric, Class A ASTM E-969

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.