Borosilicate Glass Fiber Filter

Compare Tool

Select up to 3 products

Borosilicate Glass Fiber Filter
1 - 32 of 35
Sort
View
Show
  • 934-AH™ Borosilicate Glass Microfiber Filters

    Cytiva (formerly GE Healthcare Life Sciences)

    …temperatures. As specified for the analysis of water and waste samples in the Standard Methods for the Examination of Water and Wastewater (1992) Retains precipitates such as silver chloride Compares favorably with fritted glass filter crucibles Maximum usable temperature 500°C

  • GF/D Borosilicate Glass Microfiber Filters

    Cytiva (formerly GE Healthcare Life Sciences)

    …speed; ten times more rapid than the fastest comparable retention cellulose filter paper Withstands temperature to 500°C Designed as a membrane pre-filter, with sizes to fit most holders Used for sample collecting and testing in clinical screening; borosilicate glass without binders

  • GF/B Borosilicate Glass Microfiber Filter Discs

    Cytiva (formerly GE Healthcare Life Sciences)

    …and are easily sterilized. Wide, useful temperature range which can be used at 500°C and at low temperatures. Three times thicker than GF/A and with greater wet strength Borosilicate glass fibers 1.0 µm particle retention 0.7 mm thick; filtration speed 5.5 mL/second

  • GF/A Borosilicate Glass Microfiber Filters

    Cytiva (formerly GE Healthcare Life Sciences)

    … Most widely used in biochemistry for filtration of precipitated proteins Withstands temperatures to 500°C Attains much higher counting efficiencies compared with cellulose papers; borosilicate glass without binders Widely used for reliable results in air pollution analysis

  • Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Highly resistant to chemical attack and biologically inert. Binder-free and thermostable to 500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade…

  • Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. These grades are thicker and have a high loading capacity and typically faster flow times. Recommended for filtering viscous fluids such as proteinaceous solutions and gels and as prefilter to extend membrane…

  • Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Organic binder gives these filters higher wet strength and lower fiber release compared to binder-free grades. Thermostable to 120°C. Recommended for high pressure filtration, applications requiring wet…

  • TSS Filters are recommended for use in Standard Methods 2540 C and 2540 D. Optimized surface characteristics of this binderless borosilicate glass microfiber filter eliminates pin-holing and fiber-shedding to ensure consistent, accurate results comparable to 934-AH® brand filters. Fast flow…

  • …seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Glass Fiber thimbles are made of pure borosilicate glass microfibers. These binder-free filters can withstand…

  • Depth filters with high particle loading capacity. Made of 100% borosilicate. Temperature resistant up to 500 °C. Typically placed directly on top of other membrane filters to act as a prefilter; or may be used to filter solutions directly.

  • …counting. Binderless borosilicate glass microfiber enables use up to 550°C. Particle Retention: 1.50 µm Filtration Speed: 47 seconds Thickness: 0.43 mm Basis Weight: 64 g/m 2 Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the…

  • Presep Glass Prefilters

    GVS Filter Technology

    Glass Fiber Filters WITHOUT Binders, 0.7 µm Pore Size (4749A72) Borosilicate glass fiber filters designed for use in U.S. EPA Method 1311 Toxicity Characteristic Leaching Procedure (TCLP). Federal regulations require the filters for this application be made of borosilicate glass fiber,

  • EZFlow® 90mm Glass Fiber membrane disc filters are manufactured from Borosilicate glass without binders. These glass fiber disc filters have good solids holding capacity and can be used as pre-filters for heavily contaminated solution samples. The glass fiber membrane disc filters have high flow…

  • …particulate filter for gasses or as a prefilter. Binderless borosilicate glass microfiber. Particle retention: 1.00 µm Filtration speed: 30 seconds Thickness: 0.65 mm Basis weight: 140 g/m 2 Depth filtration categorizes filter media that traps particulate within the random matrix of fibers

  • …harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28 mm Basis weight: 50 g/m 2 Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness…

  • Whatman Multigrade 150 Glass Fiber Filters

    Cytiva (formerly GE Healthcare Life Sciences)

    …particles)100% borosilicate glass, binder-freeExtends life of final filter membraneCytiva (formerly GE Healthcare Life Sciences) Whatman GMF 150 prefilters are multilayer graded density filters for rapid and efficient filtration of samples with high solids content. Multilayer filter design When…

  • …efficiency rating of the filter is characteristic of the complex pore structure that develops as the fibers overlap. The fibrous material within the filter is commonly glass micro fiber or polypropylene. In depth filters such as glass micro fiber, the purity of the filter is dictated by the presence…

  • …immunoglobulins. Binderless borosilicate glass microfiber. Particle retention: 0.70 µm Filtration speed: 80 seconds Thickness: 0.40 mm Basis weight: 80 g/m 2 Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of…

  • Grade GF/F Glass Microfiber Filters, Binder Free

    Cytiva (formerly GE Healthcare Life Sciences)

    …Grade GF/F filter from Cytiva (formerly GE Healthcare Life Sciences) business is manufactured from pure borosilicate glass. GF/F offers very fine particle retention and good loading capacity and flow rate. 0.7 µm nominal particle retention Served as the basis filter for EPA standard…

  • …the solution may need to be filtered through a glass fiber filter. STM 4500-P.C Phosphorus in Water: Vanadomolybdophosphoric Acid Colorimetric Method During sample preparation a glass fiber filter may be used as a pre-filter before the membrane filter. Grade 161 is suitable. Activated…

  • …premature clogging when filtering difficult-to-filter or highly contaminated solutions Extends filter life and reduces final filter changes with high capacity prefilters Eliminates sample contamination. Binder-free borosilicate glass fiber has no added extractables Filters a wide range of…

  • Cameo Polypropylene Syringe Filters

    GVS Filter Technology

    Designed to filter viscous and organic solvent-based samples in a wide array of analytical and research applications Pure polyproylene housing Glass fiber prefilter Autoclavable Cameo GP filters feature a 1.0 micron borosilicate glass prefilter over a PolySep…

  • Standard TCLP Filters

    Environmental Express

    Binder-free borosilicate glass fiber filters have porosity limits of 0.7µm +/- 0.1µm and exhibit a 98% particle retention rate at that particle size.

  • 100% pure borosilicate glass microfibers; contains no binders or additives High loading capacity Consistent uniformity and excellent weight repeatability Rapid flow rate Particle retention range: 0.7 - 3.1 µm Chemical and thermal resistance (up to 550°C) Long shelf life GRADE…

  • Made of borosilicate glass Contains minimal heavy metals and is practically free from fluorine and alumina Strong, yet soft and pliable Suitable as a filtering medium due to its low alkali content Maximum service temperature 500°C Fiber diameter 0.008 mm

  • Glass Wool

    United Scientific Supplies

    Non-flammable glass wool for use in general laboratory and industrial applications. Used for filtering out fine precipitates where filter papers are not suitable and the intertwined borosilicate glass fibers provide thermal insulation.

  • …particulate. Binderless borosilicate glass micro fiber. Particle retention: 1.60 µm Filtration speed: 12 seconds Thickness: 0.30 mm Basis weight: 55 g/m 2 Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within…

  • …line filtration of gases or liquids at pressures up to 125 psig Glass fiber element, nylon housing Autoclavable Transparent Nylon housing contains permanently bonded filter tube of borosilicate glass fibers with fluorocarbon binder. Connectors take 1/4” tubing. Can be…

  • …applications. Binderless borosilicate glass microfiber. Particle retention: 1.30 µm Filtration speed: 12 seconds Thickness: 0.35 mm Basis weight: 70 g/m 2 Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within…

  • Depth Filtration Glass Micro Fiber GRADE D - Coarse porosity, fast flow rate, with a 2.7 µm size particle retention. Well suited for higher volume and repetitive laboratory filtering. Also ideally used as a general pre-filter to extend primary filter life. Binderless borosilicate glass

  • Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are…

  • Acid Treated, Low Metal TCLP Filters

    Cytiva (formerly GE Healthcare Life Sciences)

    Binder-free, borosilicate glass microfiber Filters are designed to determine the leaching potential in a landfill for hazardous organic and inorganic contaminants that could potentially migrate into groundwater and drinking water sources. Particle retention rating of 0.6 to 0.8…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.