Bod

Compare Tool

Select up to 3 products

Bod
1 - 32 of 166
Sort
View
Show

Hach

  • BOD Nutrient Buffer Pillows Use for preparing BOD dilution water Ready for immediate use 19-mL size powder pillows Each pillow prepares 19 liters of dilution water 25/pk

  • BOD Analyst Program for WINDOWS Conforms to Standard Methods Saves time and reduces errors Automates BOD calculations Insures data integrity Eliminates need for initial measurements of each sample dilution and derives theDO values based on the measurement of only…

  • BOD: SimpleWater

    Environmental Express

  • BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. BOD bottles have a specially designed…

  • …ppm BOD. Higher values can be measured by diluting the sample. BOD Sensor is available in different configurations: BOD Sensor Set, a ready-to-use solution for individual BOD analysis only, consisting of a BOD Sensor, a dark glass bottle, an alkali holder and a stirring bar. BOD Sensor…

  • …vacuum pressure, which can be determined as a measured value in mg/l BOD. The sample volume used regulates how much oxygen is available in order for full BOD to run. With different volumes, measuring ranges up to 4,000 mg/l BOD can be measured. The OxiTop® heads (green and yellow to…

  • 300 mL BOD Bottles with Robotic Stoppers

    DWK Life Sciences (Wheaton)

    …aerobic biochemical action. These 300 mL capacity bottles are recommended for the five-day BOD test as referenced in Standard Methods for the Examination of Water and Wastewater, 18th Edition, 5210B, 1992. BOD bottles have a specially designed shoulder radius that sweeps all air from inside the…

  • …respiration and consumption of oxygen. BOD results that are easy to monitor The BODTrak II Apparatus has a large graphic display that continuously updates results. View the results at any time during the test. The instrument plots a curve of BOD over time. To review the data in detail,…

  • …Oxygen Demand (BOD) is an expression for the quantity of oxygen required for biological degradation of organic matter in a waste water sample. BOD measurement is used as a basis for the detection of biologically degradable organic matter in water. The difference between BOD and chemical oxygen…

  • Replaceable cap membrane Removable stirring mechanism Interchangeable design Simplifies measurement operations Use with standard 300 mL BOD bottles; no need for external stirring devices. Improved membrane life assures measurement consistency and speeds maintenance. Probe accuracy…

  • Achieve untapped potential in incubation with the temperature precision you need for applications that demand it. With a temperature range of +5 to +70°C, Thermo Scientific Heratherm Refrigerated Incubators are equipped with Peltier technology to reach and maintain the precise ambient…

  • …declaration of conformity and test certificate S600-Kit: As S900-Kit, but with InLab® 605-ISM instead of InLab® OptiOx. S900-Kit: As S900-Basic, but with InLab® OptiOx, guide to DO measurement and zero oxygen tablets S900-BOD: As S900-Kit, also including BOD adapter.

  • Convenient, fast and cost-effective BOD5 analysis with consistent results. Each capsule contains a minimum of 100 mg of specialized microbial cultures ideal for use in a broad range of areas involving degradation of industrial and municipal waste. Formulated according to The Standard…

  • Disposable BOD Bottle, 300ml

    Environmental Express

    … Acrylic stoppers work with all brands of glass and plastic 300mL BOD bottles. Overcaps are made of polyethylene and fit snugly against the rim and shoulder of these disposable BOD bottles. The use of a cap over the mouth of a BOD bottle, to prevent evaporation, is recommended by Standard Methods.

  • …techniques, the BOD EVO Sensor fits directly on the bottle containing the sample. Measurement is available on 4 different scales - 90, 250, 600 and 999 ppm BOD. Higher values can be measured by diluting the sample. BOD EVO Sensor System 6 is a complete package for BOD analysis and is…

  • 300 mL BOD Bottles with Pennyhead Stoppers

    DWK Life Sciences (Wheaton)

    …aerobic biochemical action. These 300 mL capacity bottles are recommended for the five-day BOD test as referenced in Standard Methods for the Examination of Water and Wastewater, 18th Edition, 5210B, 1992. BOD bottles have a specially designed shoulder radius that sweeps all air from inside the…

  • Evaluation possibility/data transfer to PC for documentation according to GLP with the respirometric OxiTop® Control meter for BOD self check measurement Convenient operation via controller Suitable for large sample volumes - up to 100 parallel samples Time-saving and error-free…

  • BOD Bottles

    United Scientific Supplies

    BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5 day biochemical oxygen demand (BOD) test. Bottles are unnumbered and feature a penny head stopper.

  • Designed to meet the demanding requirements of Biochemical Oxygen Demand (BOD), scientific and laboratory applications. Industrial quality cabinet with a heavy duty refrigeration system will store up to (71) 300 ml BOD bottles. Standard Product Features: Programmable logic…

  • The 200-BOD is a self-stirring BOD probe designed to fit into standard 300 mL BOD bottles and used with the DO200 handheld DO instrument. Uses wall power - power supply included Modular design allows for serviceability Uses convenient screw-on PE cap membranes for the fastest repsonse…

  • BOD Accessory

    Thermo Scientific Orion

  • Probe Caps And Maintenance Kits

    Thermo Scientific Orion

    7238F12 Maintenance Kit includes electrolyte solution (2 oz.), two membrane caps and a polishing disk. 7238F20 Maintenance Kit includes electrolyte solution (2 oz.), cleaning solution (2 oz.), cleaning paper, three membrane caps and a filling pipet. 7238F56 Maintenance Kit includes…

  • …from 250 - 1,000 ml can be used but a different fastening device such as a cabletie, wire, etc. will be required. Whether testing for chlorine, BOD (biochemical oxygen demand), or SS (suspended solids), the Sludge Nabber’s flexibility with holding various bottles, and its adjustable length,…

  • … Easily transfer data and keep meter software up-to-date with the USB and RS232 ports and included data analysis software For faster BOD readings, control the Orion AUTO-STIR* polarographic DO probe (086030MD, sold separately) directly from the meter Included electrode arm…

  • The ProOBOD® self-stirring optical BOD probes are designed to fit into standard 300 mL BOD bottles with an international version also available for use with other tapers. EPA approved for wastewater compliance reporting of BOD and CBOD. The ProOBOD is designed for use with the YSI ProODO…

  • …SRI3 space-saving low temperature incubator is ideal for small volume workloads and meets APHA specifications for Biochemical Oxygen Demand (B.O.D.) analysis. Units are equipped with a hermetically-sealed compressor, a circuit breaker to protect from electrical overload, and an easy-to-clean…

  • Stopperless BOD Bottles

    DWK Life Sciences (Wheaton)

    …biochemical action.  The 300 mL capacity bottles are recommended for the five-day BOD test as referenced in Standard Methods for the Examination of Water and Wastewater, 18th Edition, 5210B, 1992. These BOD bottles have a specially designed shoulder radius that sweeps all air from inside the…

  • BOD Bottle Accessories

    DWK Life Sciences (Wheaton)

    BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…

  • BOD Aerator, For 300 ml BOD Bottles

    DWK Life Sciences (Wheaton)

  • Numbered BOD Bottles

    United Scientific Supplies

    BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5-day biochemical oxygen demand (BOD) test. Bottles are numbered to allow for convenient organization of samples. 300ml bottles also include a bar code. Glass robotic stoppers are…

  • Usable with all classic grey box and lab meters Measures dissolved oxygen and temperature in B.O.D. bottles Designed to fit into neck of any bottle with a 0.675 inch opening Probe requires manual stirring or use of magnetic stirrer With Membrane and KCl kit. Lead, 1.5 meter (5 ft.).

  • Scienceware® BOD Bottle Carrier

    Bel-Art - SP Scienceware

    Autoclavable Overall dimensions 13-1/8” x 6-3/4” x 2-5/8” Opening 2.8" diameter Polypropylene carrier has eight wells for 300 mL bottles, bottles not included.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.