Bnc Ph Probe

Compare Tool

Select up to 3 products

Bnc Ph Probe
1 - 32 of 46
Sort
View
Show
  • Orion Do / BOD Probe, Waterproof, BNC Connector

    Thermo Scientific Orion

    pH meter, the Orion™ 97-08 Oxygen electrode simplifies routine dissolved oxygen measurements, especially for biochemical oxygen demand (BOD). Polarographic O2 sensor plus solid-state circuitry in probe top; converts current to voltage for direct DO readout Plug probe into…

  • Probes

    Hach

    4139A72: PH30-GS Glass Sensor Probe, Epoxy Body Glass pH electrode, range of 0-14 pH. BNC connection. Reference electrode for temperature sold separately. 4139A76: ORP110-GS Standard ORP Probe Standard ORP Probe with BNC Connector, 3 ft. cable, 12 x 110 mm body, and Platinum band…

  • pH Controller

    Milwaukee Instruments

    …individual attention that it needs. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Professional pH controller especially designed for use with aquariums. User selectable Hi/Low Set Point…

  • pHE-01 Basic Combination pH Electrode

    labForce (a Thomas Scientific Brand)

    …liquid, or for continuous testing in high temperature solutions (>140°F). Compatible with any pH meters that use BNC connectors. Temperature sensor is not built-in. Users need to have a separate temperature probe to enable ATC or manually input temperature to complete temperature compensation.

  • pHE-04 Glass Combination pH Electrode

    labForce (a Thomas Scientific Brand)

    … Range: 0-14 pH Temp. Range: -5 to 100°C (23 to 212°F) Connector: BNC Cable: 3 Ft The electrode uses a BNC connector, compatible with any pH meters that use BNC connectors. Temperature sensor is not built-in. Users need to have a separate temperature probe (ATC-01) to enable…

  • pH Monitors

    Milwaukee Instruments

    …the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution. Professional pH

  • AquaShock® pH ORP Kit

    Sper Scientific

    …waterproof and will float if accidentally dropped in water. The screw-down probe connections are watertight when used with AquaShock® probes, while a standard BNC connector underneath enables use of any pH probes with BNC connectors.* The latest high performance electronics give AquaShock® meters…

  • AquaShock® pH Kit

    Sper Scientific

    …waterproof and will float if accidentally dropped in water. The screw-down probe connections are watertight when used with AquaShock® probes, while a standard BNC connector underneath enables use of any pH probes with BNC connectors.* The latest high performance electronics give AquaShock® meters…

  • Datalogging pH Meter Kit

    Sper Scientific

    … CE Mark 1-year warranty Everything necessary for immediate field use: pH SD Card logger 850060, sealed epoxy body reference combination electrode with a BNC connector and a 2½' cable, ATC temperature probe, pH buffers 4, 7, 10 and deionized water, batteries and instructions. All components…

  • Temperature Probes

    Thermo Scientific Orion

    Specifically for Thermo Orion A+ series meters Enables use of any BNC type electrode without temperature sensor (triode) to take advantage of meter’s automatic temperature compensation.

  • pH Meters and Accessories

    Sper Scientific

    …use. 9V battery included. The Advanced ph Meter kit includes everything needed for immediate field use: Advanced pH Meter, epoxy body sealed reference combination electrode with a BNC connector and a 2½" cable, temperature probe, pH buffers 4, 7, and 10, deionized water, instructions,…

  • pH SD Card Datalogger

    Sper Scientific

    …backlit LCD. Comes ready to use in a soft carrying case with 6 AA batteries, instruction manual and a 2GB SD card. ATC temperature probe available as optional accessory. Will accept any pH or ORP probe with a BNC connector. Dim: 7" x 2 ¾" x 2" (177 x 68 x 45 mm) Weight: 1lb. (489g)

  • NMR Tube pH ElectrO.D.e

    Wilmad-LabGlass - SP Scienceware

    …can measure pH range from 0 to 14 inside an NMR sample. For use in 5mm thin walled NMR tubes up to 8 inches in length Glass probe dimensions are 3 OD x 180 mm L pH Range: 0-14 Temperature Range: 0-70°C Resolution: 0.02 pH Units Sodium Error: 0.1 at pH 12 Resistance…

  • pH / ORP Controller

    Milwaukee Instruments

    …aquarium will have the individual attention that it needs. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Smart Professional pH/ORP controller. User selectable Hi/Low Set Point Manual…

  • pH1600 Laboratory pH Electrode

    Sensorex

    Durable and chemically compatible Ultem® or body, reliable and accurate over the full range of pH measurements, no refilling or maintenance required with sealed gel-filled design, instantly ready for use.

  • InLab® Maintenance-Free pH Sensors

    Mettler Toledo

    … InLab Expert Pro-2m-ISM: A combination pH electrode with integrated temperature probe, PEEK shaft, 2 m fixed cable and ISM. Designed for general applications in the lab and outdoor; robust and maintenance-free. InLab Easy BNC: A combination pH electrode with plastic shaft, gel electrolyte…

  • pH2100 Flat Tip pH Electrode

    Sensorex

    Flat measurement tip for surface measurements and slurries, double junction electrode design prevents reference contamination, durable Ultem® body, booted BNC protects meter connection.

  • pH2200 Spear Tip pH Sensor

    Sensorex

    pH2200 spear tip pH sensor, specially designed to penetrate semi-solid surfaces for effective pH measurement. Assembled with a bio-friendly Ultem® body, making it safe for use in food and soil. Use with any pH meter accepting a BNC connector.

  • Portable pH Meter with Temperature

    Sper Scientific

    …accept any pH probe or ORP probe (PROBES SOLD SEPARATELY) with a BNC connector. Weight: 14oz (397g). Dim: 6¾ x 2¾ x 1¼" (170 x 70 x 33mm). Advanced pH Kit Advanced pH Meter 850055 in a hard carrying case complete with a detachable temperature compensated pH probe with- 3½' cable, pH buffers…

  • pH1000 Polycarbonate Laboratory pH Sensor

    Sensorex

    Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. Our pH1000 polycarbonate pH sensor provides reliable, stable readings in a range of environments, from greenhouses…

  • pH3000 Research Grade pH Sensor

    Sensorex

    The pH3000 is specially designed to respond quickly and accurately to rapid temperature changes. The double junction reference design prevents contamination, allowing pH testing in samples containing heavy metals, proteins and enzymes, or TRIS buffer.

  • sensION Platinum Series Combination pH Electrode

    Hach

    Hach Platinum Series pH probe is a standard combination pH probe with a replaceable gel reference and built-in temperature sensor. Probe comes with two electrolyte cartridges and has a fixed cable with BNC and DIN connectors compatible Hach EC series meters. Maximum life through reduced…

  • All in One pH Electrodes: Waterproof Series

    Oakton

    Built-in temperature sensor lets you take ATC readings with a single probe Includes a FREE electrode saver bottle to extend electrode life Feature a BNC connector for pH and a waterproof 6-pin connector for temperature All-in-One Waterproof electrodes feature a built-in…

  • pH1400 Light Duty Glass pH Electrode

    Sensorex

    If you deal with a wide variety of chemicals or any aggressive substances, a glass probe like our pH1400 is a safe choice due to the chemically inert properties of glass. This single junction electrode has a refillable reference cell.

  • pH3400 Research Grade Glass pH Electrode

    Sensorex

    The research grade pH3400 is a highly versatile combination pH electrode, specially designed to respond quickly and accurately to rapid temperature changes.

  • pH2500 Flat Surface Glass pH Electrode

    Sensorex

    …leather, electrophoresis gels and agar plates may be difficult to measure with traditional pH glass bulbs due to concerns about breakage. A flat electrode like our pH2100, is ideally suited for these types of pH measurements as well as measurements of suspended sludges and slurries. In addition to…

  • pH2000 Extended Life Laboratory pH Sensor

    Sensorex

    The pH2000 has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants, low maintenance sealed gel reference design, durable Ultem® body.

  • pH2400 Extended Life Glass pH Electrode

    Sensorex

    Our pH2400 has a double junction reference design to prevent fouling by sample contaminants that interact with Silver (Ag). The refillable reference junction allows users to replace the liquid fill solution as it becomes depleted or contaminated, instead of replacing the whole sensor.

  • pH Meters, Stainless Steel Enclosures, Digital Displays, Process Reactors

    Chemglass

    …use with CG-1872 pH electrodes with an integrated PT100 sensor for temperature correction. Connection is made using a standard BNC probe connector with a 3-pin banana connector plug for RTD. CG-1872-M-20 Meters Are Supplied with CG-1872-M-25 Adapter Cables. Please Note: Probes are NOT Included…

  • Bench-Top pH/mV Meter

    Sper Scientific

    …status indication Operates on AC voltage (no batteries). Comes ready to use with ATC pH electrode, electrode holder arm, AC adaptor, computer cable & software. Also accepts any pH or ORP probe with a standard BNC connector. Dimensions: 8½" x 6½" x 2¼" (217 x 168 x 58mm). Weight: 18oz (533g).

  • TruLab 1110 pH/mV Benchtop Meters

    YSI

    …temperature compensation 1, 2 or 3-point calibration BNC connection for pH, mV; banana connection for temperature probes 3-year manufacturer's warranty Wide selection of electrodes - pH, ORP and temperature probes   Repeatable/Efficient The instrument's…

  • TruLab 1310 and 1310P pH/mV Benchtop Meters

    YSI

    …or 5 point calibration for pH; 22 stored buffer sets for auto-buffer recognition and easy calibration BNC connection for pH, mV; banana connection for temperature probes Continuous Monitoring Control (CMC) function for monitoring the ideal measuring range for pH measurements based on the last…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.