Bnc Ph Probe

Compare Tool

Select up to 3 products

Bnc Ph Probe
1 - 32 of 47
Sort
View
Show
  • pHE-01 Basic Combination pH Electrode

    labForce® (a Thomas Scientific Brand)

    …liquid, or for continuous testing in high temperature solutions (>140°F). Compatible with any pH meters that use BNC connectors. Temperature sensor is not built-in. Users need to have a separate temperature probe to enable ATC or manually input temperature to complete temperature compensation.

  • pHE-04 Glass Combination pH Electrode

    labForce® (a Thomas Scientific Brand)

    … Range: 0-14 pH Temp. Range: -5 to 100°C (23 to 212°F) Connector: BNC Cable: 3 Ft The electrode uses a BNC connector, compatible with any pH meters that use BNC connectors. Temperature sensor is not built-in. Users need to have a separate temperature probe (ATC-01) to enable…

  • …cavity under the pH glass membrane. With the built-in heat-conducting medium, the temperature sensing speed can be increased by 40%, hence the response time and stability of the pH electrode are greatly improved. The electrode uses a BNC/RCA connector, compatible with all labForce pH meters. This…

  • The pH3000 is specially designed to respond quickly and accurately to rapid temperature changes. The double junction reference design prevents contamination, allowing pH testing in samples containing heavy metals, proteins and enzymes, or TRIS buffer.

  • probe hard to contaminate and maintenance-free. Ideal for professional soft-solid food's pH measuring such as cheese, bread, fruit, sushi rice, meat, etc. The electrode uses a BNC connector, compatible with all labForce pH meters. This is a replacement pH electrode for the labForce F200 Portable pH

  • Built-in temperature sensor lets you take ATC readings with a single probe Includes a FREE electrode saver bottle to extend electrode life Feature a BNC connector for pH and a waterproof 6-pin connector for temperature All-in-One Waterproof electrodes feature a built-in…

  • Durable and chemically compatible Ultem® or body, reliable and accurate over the full range of pH measurements, no refilling or maintenance required with sealed gel-filled design, instantly ready for use.

  • Datalogging pH Meter Kit

    Sper Scientific

    … CE Mark 1-year warranty Everything necessary for immediate field use: pH SD Card logger 850060, sealed epoxy body reference combination electrode with a BNC connector and a 2½' cable, ATC temperature probe, pH buffers 4, 7, 10 and deionized water, batteries and instructions. All components…

  • …system, making the probe hard to contaminate and maintenance-free. Ideal for measuring pH of meat such as fish, meat, and other meat products. The electrode uses a BNC connector, compatible with all labForce pH meters. This is a replacement pH electrode for the TS-MB200 portable pH meter.

  • … InLab Expert Pro-2m-ISM: A combination pH electrode with integrated temperature probe, PEEK shaft, 2 m fixed cable and ISM. Designed for general applications in the lab and outdoor; robust and maintenance-free. InLab Easy BNC: A combination pH electrode with plastic shaft, gel electrolyte…

  • pH2200 spear tip pH sensor, specially designed to penetrate semi-solid surfaces for effective pH measurement. Assembled with a bio-friendly Ultem® body, making it safe for use in food and soil. Use with any pH meter accepting a BNC connector.

  • The pH2000 has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants, low maintenance sealed gel reference design, durable Ultem® body.

  • Electrode Extension & Adapter Cables

    Thermo Scientific Orion

    …when using the Thermo Scientific™ Orion™ Electrode Extension Cables. Can be used with Orion ATC probes, any reference electrode with 2mm pin tip connector or any electrode with a BNC connector. Orion™ Electrode Adapter Cables Convert an electrode with one connector to the…

  • …accept any pH probe or ORP probe (PROBES SOLD SEPARATELY) with a BNC connector. Weight: 14oz (397g). Dim: 6¾ x 2¾ x 1¼" (170 x 70 x 33mm). Advanced pH Kit Advanced pH Meter 850055 in a hard carrying case complete with a detachable temperature compensated pH probe with- 3½' cable, pH buffers…

  • pH SD Card Datalogger

    Sper Scientific

    …backlit LCD. Comes ready to use in a soft carrying case with 6 AA batteries, instruction manual and a 2GB SD card. ATC temperature probe available as optional accessory. Will accept any pH or ORP probe with a BNC connector. Dim: 7" x 2 ¾" x 2" (177 x 68 x 45 mm) Weight: 1lb. (489g)

  • Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. Our pH1000 polycarbonate pH sensor provides reliable, stable readings in a range of environments, from greenhouses…

  • Temperature Probes

    Thermo Scientific Orion

    Specifically for Thermo Orion A+ series meters Enables use of any BNC type electrode without temperature sensor (triode) to take advantage of meter’s automatic temperature compensation.

  • pH Monitors

    Milwaukee Instruments

    …the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution. Professional pH

  • pH Controller

    Milwaukee Instruments

    …individual attention that it needs. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Professional pH controller especially designed for use with aquariums. User selectable Hi/Low Set Point…

  • Our pH2400 has a double junction reference design to prevent fouling by sample contaminants that interact with Silver (Ag). The refillable reference junction allows users to replace the liquid fill solution as it becomes depleted or contaminated, instead of replacing the whole sensor.

  • Flat measurement tip for surface measurements and slurries, double junction electrode design prevents reference contamination, durable Ultem® body, booted BNC protects meter connection.

  • …(optical BOD) probe, double junction pH electrode and BOD Analyst Pro software to automate BOD testing. Thomas No. 1203K11 Calibration kit for IDS pH electrodes; 3 ampules: 4.01, 6.86, 9.18 Thomas No. 1203K12 DIN pH adapter for 4010-2/3 Thomas No. 1203K13 BNC pH adapter…

  • pH / ORP Controller

    Milwaukee Instruments

    …aquarium will have the individual attention that it needs. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Smart Professional pH/ORP controller. User selectable Hi/Low Set Point Manual…

  • pH meter, the Orion™ 97-08 Oxygen electrode simplifies routine dissolved oxygen measurements, especially for biochemical oxygen demand (BOD). Polarographic O2 sensor plus solid-state circuitry in probe top; converts current to voltage for direct DO readout Plug probe into…

  • Hach Platinum Series pH probe is a standard combination pH probe with a replaceable gel reference and built-in temperature sensor. Probe comes with two electrolyte cartridges and has a fixed cable with BNC and DIN connectors compatible Hach EC series meters. Maximum life through reduced…

  • pH Meters and Accessories

    Sper Scientific

    …use. 9V battery included. The Advanced ph Meter kit includes everything needed for immediate field use: Advanced pH Meter, epoxy body sealed reference combination electrode with a BNC connector and a 2½" cable, temperature probe, pH buffers 4, 7, and 10, deionized water, instructions,…

  • NMR Tube pH ElectrO.D.e

    SP Wilmad-LabGlass

    …can measure pH range from 0 to 14 inside an NMR sample. For use in 5mm thin walled NMR tubes up to 8 inches in length Glass probe dimensions are 3 OD x 180 mm L pH Range: 0-14 Temperature Range: 0-70°C Resolution: 0.02 pH Units Sodium Error: 0.1 at pH 12 Resistance…

  • If you deal with a wide variety of chemicals or any aggressive substances, a glass probe like our pH1400 is a safe choice due to the chemically inert properties of glass. This single junction electrode has a refillable reference cell.

  • The research grade pH3400 is a highly versatile combination pH electrode, specially designed to respond quickly and accurately to rapid temperature changes.

  • …leather, electrophoresis gels and agar plates may be difficult to measure with traditional pH glass bulbs due to concerns about breakage. A flat electrode like our pH2100, is ideally suited for these types of pH measurements as well as measurements of suspended sludges and slurries. In addition to…

  • …with CG-1872 pH electrodes with an integrated PT100 sensor for temperature correction. Connection is made using a standard BNC probe connector with a 3-pin banana connector plug for RTD. CG-1872-M-20 Meters Are Supplied with CG-1872-M-25 Adapter Cables. Please Note: Probes are NOT Included…

  • Bench-Top pH/mV Meter

    Sper Scientific

    …status indication Operates on AC voltage (no batteries). Comes ready to use with ATC pH electrode, electrode holder arm, AC adaptor, computer cable & software. Also accepts any pH or ORP probe with a standard BNC connector. Dimensions: 8½" x 6½" x 2¼" (217 x 168 x 58mm). Weight: 18oz (533g).

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.