Bnc Ph Probe

Compare Tool

Select up to 3 products

Bnc Ph Probe
33 - 46 of 46
Sort
View
Show
  • TRUEscience Adapter Cables

    TRUEscience

    …source or flow cell. Note: The cable extends mV input only (not temperature) TRUEscience Item No. 1201274 Male S7 Head to Male BNC (BNS) Lead 0.2m. To connect a BNC electrode to the TRUEscience cap. Note: The cable extends mV input only (not temperature) TRUEscience Item No. 1222330 S7…

  • TruLab 1320 and 1320P pH/mV/ISE Benchtop Meters

    YSI

    …or 5 point calibration for pH 1, 2, 3, 4, 5, 6 or 7 point calibration for ISE, also non- linear BNC connection for pH, mV and ISEs; banana connection for temperature probes Continuous Monitoring Control (CMC) function for monitoring the ideal measuring range for pH measurements based on the…

  • Bench-Top Cond/TDS/Salinity Meter

    Sper Scientific

    …status indication Operates on AC voltage (no batteries). Comes ready to use with ATC pH electrode, electrode holder arm, AC adaptor, computer cable & software. Also accepts any pH or ORP probe with a standard BNC connector. Dimensions: 8½" x 6½" x 2¼" (217 x 168 x 58mm). Weight: 18oz (533g).

  • Bench-Top Water Quality Meter

    Sper Scientific

    …indication Operates on AC voltage (no batteries). Comes ready to use with ATC pH electrode, electrode holder arm, AC adaptor, computer cable & software. Also accepts any pH or ORP probe with a standard BNC connector. Dimensions: 8½"" x 6½"" x 2¼"" (217 x 168 x 58mm). Weight: 18oz (533g). …

  • ORP Controller

    Milwaukee Instruments

    …kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Smart Professional ORP controller. User selectable Hi/Low Set Point Visual LED alarm Supplied with 12 VDC adapter 1 power plug for O3 dosing Platinum ORP electrode (BNC connector)

  • Water Quality Meter and Accessories

    Sper Scientific

    …two probes. The Water Quality Meter Kit includes everything needed for immediate field use as a pH meter; Water Quality Meter (which already has a built in BNC connector), epoxy body sealed reference combination electrode with a BNC connector and a 2½" cable, ATC Temperature Probe,

  • ORP1000 Polycarbonate Laboratory ORP Sensor

    Sensorex

    The ORP1000 is a durable and easy to use ORP sensor and has built in protection for the ORP sensor surface. Use with any ORP meter accepting a BNC connector.

  • Electrode Extension & Adapter Cables

    Thermo Scientific Orion

    …when using the Thermo Scientific™ Orion™ Electrode Extension Cables. Can be used with Orion ATC probes, any reference electrode with 2mm pin tip connector or any electrode with a BNC connector. Orion™ Electrode Adapter Cables Convert an electrode with one connector to the…

  • Dual Star™ pH, ISE, mV, ORP and Temperature Dual Channel Benchtop Meters

    Thermo Scientific Orion

    …showing the results of two channels simultaneously on its large, backlit display. Measure pH, ion concentration (ISE), mV, relative mV or ORP with temperature on two channels using the meter’s two BNC, reference pin-tip and ATC temperature inputs. Collect critical measurements using an…

  • 3-in-1 Combination Electrodes

    Sensorex

    …electrodes supplied with your meter but at substantial savings. Built into the body is an ATC element compatible with your meter. Combine the ATC element with the Sensorex durable and proven epoxy body pH electrode and you will get a premium quality direct fit: a 3-in-1 replacement pH electrode.

  • Accessories for YSI MultiLab Line

    YSI

    …(optical BOD) probe, double junction pH electrode and BOD Analyst Pro software to automate BOD testing. Thomas No. 1203K11 Calibration kit for IDS pH electrodes; 3 ampules: 4.01, 6.86, 9.18 Thomas No. 1203K12 DIN pH adapter for 4010-2/3 Thomas No. 1203K13 BNC pH adapter…

  • MultiLab Multi-Parameter Benchtop Meters

    YSI

    …can accurately measure pH, ORP, conductivity, and DO/BOD. ISEs can also be connected to two and three channel instruments. Features of the MultiLab line: Input for pH, ORP, DO/BOD (optical or polarographic), or conductivity sensors ISEs with BNC connection can be connected…

  • TDS Monitor

    Milwaukee Instruments

    …kit, probe, probe holder and starter calibration solution. TDS - PPM Monitor User selectable Hi/Low Set Point Manual 1 point calibration Visual LED alarm Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution MA81/2 PPM Probe with 2m cable (BNC

  • Conductivity/EC Monitor

    Milwaukee Instruments

    …activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.