Blower

Compare Tool

Select up to 3 products

Blower
1 - 32 of 128
Related Categories: Heat Gun | Fume Hood Blower | Air Sampling
Sort
View
Show
  • blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor (ECM), which consumes one third less energy and is easier and less expensive to maintain than beltdrive motors. Intelli-Sense Blowers take much of the guesswork out of blower

  • …explosion-proof blowers are designed for fume hood exhaust systems in moderate to highly corrosive conditions and have non-sparking polypropylene impellers and explosion-proof motors. Housing is molded fiberglass-reinforced polyester for durability and long life. Both blowers have a dry powder…

  • Master Heat Guns

    Master Appliance

    Professional Quality, Heavy-duty, Multiple Use Heat Guns High temperature and power ratings: up to 1000°F/540°C at 1740 watts High air flow rating: 23 CFM at 3000 FPM gets the job done fast Powerful high speed universal motor Sturdy die cast aluminum housing …

  • Included in the kit are a rotary blower with capacitor and hardware, a vent to be located above the instrument, and an adapter to permit connection of the blower and vent with suitable metal tubing. The adapter and vent are made of stainless steel sheets. * Notice: Local electrical codes do not…

  • Permanent split capacitor, steel housed blower used to pull air through our Air Sampling manifolds. Blower produces 50 cfm @ 0.0 meters of water static pressure which assures a minimum pressure drop across each port in the manifold train. Free air rpm is 3030. Available in both 115 & 230v…

  • Masterflow Heat Blower

    Master Appliance

    3 models produce 300°F, 500°F or 750°F. High temperatures accommodate many heating, drying & shrinking applications High air flow: 47 CFM at 2200 FPM gets job done fast Brushless induction type motor for quiet, continuous-duty operation Easily replaceable, reinforced,…

  • Phenolic-coated impeller and housing Dry powder epoxy-coated steel base and removable weather cover Belt-drive motor with adjustable sheave and self-adjusting gravity belt tightener

  • This Remote Blower is for connection to XPert Balance Enclosure, Protector XVS Ventilation Station, Purifier HEPA Filtered Enclosure,  Protector Work Station or Protector Demonstration Hood. The direct drive blower has a 1/4 hp TEFC-type motor and overcomes  external static…

  • 25mm Blower Mount

    Ace Glass

    Aluminum blower mount for connecting 7511 blower to glass manifold. With threaded stock.

  • Epoxy-coated Steel Blower Transition Adaptors allow you to connect thermoplastic duct to the exhaust side of a blower to create an exhaust stack. Nominal size PVC duct fits inside the adaptor opening.

  • Master-Mite® Heat Gun

    Master Appliance

    Continuous-duty  Bench-top Heating System Complete system  comes standard with  650°F/343°C heating  element, adjustable  stand and heat shrink  attachment Quiet-running shaded  pole motor, eliminates  noisy production areas 3…

  • …ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules). Basic 47 Hoods can be used as an individual work stations. Hoods with blower module are capable of overcoming a maximum external static pressure of .25"…

  • PVC Blowers

    Labconco

    PVC Blower, made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. Features: Vacuum formed housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid PVC…

  • Notice: Local electrical codes do not permit PerkinElmer Service Engineers to install the blower and vent assembly.

  • blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor (ECM), which consumes one third less energy and is easier and less expensive to maintain than beltdrive motors. Intelli-Sense Blowers take much of the guesswork out of blower

  • Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

  • Models 6211 and 6212 electrical ionizing blowers utilize NRD's auto­-balanclng technology, making them suitable for semiconductor back-end, printed circuit board assembly, and general electronics applications. Neither model requires periodic calbration to maintain its low offset…

  • Serrations are tooled on both ends of an 8" length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pieces tooled on both ends).

  • blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor (ECM), which consumes one third less energy and is easier and less expensive to maintain than beltdrive motors. Intelli-Sense Blowers take much of the guesswork out of blower

  • Used to construct small scale apparatus. Available in direct sealing or regular style. Serrations are tooled on both ends of an 8in length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs. tooled on both ends).

  • Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on both ends of an 8" length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pieces tooled on both ends).

  • This Remote Blower is for connection to XPert Balance Enclosure, Protector XVS Ventilation Station, Purifier HEPA Filtered Enclosure, Protector Work Station or Protector Demonstration Hood. Direct drive blower has a 1/4 hp TEFC-type motor and overcomes external static pressure of 0.5"…

  • …life. Designed for use with Labconco’s Intelli-Sense Multi-Speed Blowers, Protector Premier I-S Hoods feature integrated sash position blower controls. As the sash is raised or lowered, sensors alert the blower to change speeds to maintain a safe face velocity. That face velocity is…

  • …OSHA-recognized 60 fpm face velocity. With integrated sash position blower controls, this hood was designed for use with Labconco’s Intelli-Sense Multi-Speed Blowers. As the sash is raised or lowered, sensors alert the blower to change speeds to maintain a safe face velocity. That face…

  • Reduce vibration between the blower and PVC ductwork. Include two clamps for easy installation.

  • Positive Pressure Conversion Kit contains the components necessary to convert the built-in blower from negative pressure to positive pressure operation.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.