Blowdown Evaporator

2nd Generation UltraVap® Mistral - a automation compatible blowdown evaporator.  Fully liquid handling robot-compatible dry down station  Hotter than ever - Increase rate of sample dry down with new evaporation temperature of 80 degrees C - reducing drying times by up to 50%…

…and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design of the MiniVap(R) Gemini joins together two individually temperature-regulated evaporation…

2nd Generation Ultravap® Levante - The intuitive, automation-ready sample evaporator for microplates & tubes.    Robot-compatible  Increase rate of sample dry down with evaporation temperature of 80 degrees C - reducing drying times by up to 50%  Color…

The MiniVap® is designed for low usage R&D departments where low numbers of individual plates or vials need drying. The MiniVap® is easy to operate and maintain. Can be used with any ANSI/SLAS 96-well plate. Compact footprint - fits all standard fume cupboards.

…In the absence of a Rotavapor the Stand-alone Setup provides a comprehensive, sophisticated and independent evaporation system. In contrast to nitrogen blow-down evaporators, evaporation under vacuum is in accordance with the regulations of ISO 14000 that guarantees the smallest possible negative…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 100 position MULTIVAP nitrogen evaporator (Catalog# 11300) is…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 64 position MULTIVAP nitrogen evaporator (Catalog# 11364) is…

…pipette adapters allow Pasteur pipettes to be used instead of stainless steel needles in Organomation evaporators. NA1101 Coiled gas supply tube to connect all Organomation blowdown evaporators to a gas source. Tube is 6 ft long, ¼ in OD. NA1307 Plastic luer plug to close off unused…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 48 position MULTIVAP nitrogen evaporator (Catalog# 11848) is…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 80 position MULTIVAP nitrogen evaporator (Catalog# 11880) is…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 30 position MULTIVAP nitrogen evaporator (Catalog# 11830) is…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The Automatic 20 Position N-EVAP® is an advanced blowdown evaporator combining classic blowdown technology with timed automation. The unit can run in automatic or manual mode due to the integration of a unique pneumatic system. The automatic mode removes samples from the heating medium when the…

…microplate evaporator combines three 96 needle manifolds and three heat blocks into a single platform. This allows for simultaneous evaporation of up to three 96 well plates. The triple plate MICROVAP’s solid aluminum heating units provide consistent temperature for uniform evaporation rates…

…microplate evaporator is one of the most compact sample concentrators available, and it continues to meet the needs of the life science and pharmaceutical industries. This microplate concentrator is ideal for laboratories needing efficient solutions for the gentle evaporation of high capacity,…

…ability to expand the sample size range with an optional large sample holder makes it an ideal instrument for laboratories that will be evaporating up to 6 samples at once and are using a wide range of sample flask outside diameters. The standard instrument fits samples with an outside…

…which slows evaporation to a minimum once the timed cycle has been completed. The heat can also be shut off with the gas after a timed cycle. The 45 Position N-EVAP is available with either a heated water bath for evaporations 30-90°C or an unheated stand for evaporations at ambient…

…34 Position N-EVAP® nitrogen evaporator offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of the N-EVAP line. The evaporative system, along with the standard…

…nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying evaporation end points.…

…evaporation at ambient temperature. Corrosion resistant FEP coating is available for use with strong acids. Advantages: Flexible : A large sample holder option can be added to accommodate vials with a larger outside diameter in the range of 30-75 mm Gentle : N-EVAP nitrogen evaporators…

The 15 position MICROVAP evaporator is intended for small batch solvent evaporations, such as concentrations of sample groups in microcentrifuge tubes. It offers an effective and compact evaporation solution for samples in life science and pharmaceutical laboratories. Each MICROVAP uses minimal…

The 24 position MICROVAP evaporator is intended for concentrating small volume, small batch samples, such as concentrations of groups of samples in microcentrifuge tubes and GC vials. It offers an effective and compact solution to evaporation of samples for life sciences and pharmaceutical…

Adjustable nitrogen gas flow meter for Organomation N-EVAP Evaporators. 1/4 inch quick disconnect fitting in 1/4 inch swagelok fitting out

…In the absence of a Rotavapor the Stand-alone Setup provides a comprehensive, sophisticated and independent evaporation system. In contrast to nitrogen blow-down evaporators, evaporation under vacuum is in accordance with the regulations of ISO 14000 that guarantees the smallest possible negative…

…In the absence of a Rotavapor the Stand-alone Setup provides a comprehensive, sophisticated and independent evaporation system. In contrast to nitrogen blow-down evaporators, evaporation under vacuum is in accordance with the regulations of ISO 14000 that guarantees the smallest possible negative…

The NITRO-GEN line of nitrogen gas generators is designed for general lab purposes such as blowdown evaporation. The NITRO-GEN is ideal for labs looking to convert compressed air to high purity nitrogen quickly and inexpensively. At under 20 lbs, the NITRO-GEN is easy to install and move as needed. …

…gas” mid blow-down. Features and Benefites Ideal for any combination of sample evaporators up to 100 nozzle positions Produces clean, dry (to -20°F) dewpoint evaporator grade nitrogen from any standard laboratory compressed air source Accelerates evaporation by decreasing the…

Blunt end (90° cut) stainless steel needles with a luer lock fitting, used for nitrogen gas blowdown. Available with chrome plated or polypropylene hubs. Optional FEP coating protects against corrosive solvents. 4 inches long 16 or 19 gauge